Shop
Showing 1633–1656 of 1946 resultsSorted by price: high to low
-
-
Development Board
40 Pin ZIF Socket
Ask for Latest offer / Availability : https://bit.ly/396vnUq
- Ideal for programming and testing.
- An ideal device for programmers.
- Suitable for ICs up to 40 pins.
- Low contact resistance when the IC is in place.
- Lever action for easy insertion and removal.
- RoHS free.
SKU: PGI-00500781 -
Relay
1 channel 5V 10A Relay Control Board Module with Optocoupler
Ask for latest offers/availability : https://bit.ly/3e35PXP
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: PGI-0025289 -
Break out Boards
Micro SD Card Reader Module
Ask for latest offers/availability : https://bit.ly/2xMzwgm
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
SKU: PGI-0011566 -
Break out Boards
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.
Ask for latest offers/availability : https://bit.ly/3cj3KXs
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
SKU: PGI-0031380 -
Temperature and Humidity Sensor
Digital Temperature Module For Arduino AVR PIC DIY Maker
Ask for latest offers/availability : https://bit.ly/3eQo2Jg
- Power supply: 3 – 5V
- Good sensitivity
- The output format: Digital switching output (0 and 1)
- The comparator output signal is clean, good waveform, driving ability, more than 15mA.
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
SKU: PGI-00699535 -
Biometric/ECG/EMG/Sensor
ECG GEL ELECTRODE (3M) Pack of 5
Ask for latest offers/availability : https://bit.ly/2VtG3Wm
- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: PGI-006326 -
Line Sensor
TCRT5000 Single Channel Line Tracking Sensor Module
Ask for latest offers/availability : https://bit.ly/2x5Ia9w
- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
SKU: PGI-0034703 -
IR And PIR Sensor
TCRT5000 IR reflex Tracking Sensor Module
Ask for latest offers/availability : https://bit.ly/3axpuNk
- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
SKU: PGI-00699619 -
Sound Sensor
LM393 Sound Detection Sensor Module – Black
Ask for latest offers/availability : https://bit.ly/3asjGF9
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: PGI-0044108 -
Sound Sensor
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
Ask for latest offers/availability : https://bit.ly/2ywq8xy
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: PGI-0011584 -
-
Arduino Display
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Ask for Latest offer / Availability : https://bit.ly/3aYwdmW
- Easy to use
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
SKU: PGI-0043988 -
Current and Voltage Sensor
Voltage Detection Sensor Module 25V
Ask for latest offers/availability : https://bit.ly/2VzFGcO
- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
SKU: PGI-0029802 -
Prayog Blaster
GL No.12 830 Points Breadboard
Ask for Latest offers/availability :
- Distribution strip, Tie-point 200
- Terminal Strip, Tie-point 630
- Completely reusable Breadboard
- Brand new & high quality
- Breadboard power supply module, compatible with 5 V, 3.3 V
- 140pcs Solderless Breadboard Jumper Cable Lead Kit
- Hard Wire with Angled shape
SKU: PGI-0024441 -
Prayog Blaster, Sensors, Temperature and Humidity Sensor
LM35 TO-92-3 Board Mount Temperature Sensors
Prayog Blaster, Sensors, Temperature and Humidity SensorLM35 TO-92-3 Board Mount Temperature Sensors
Ask for Latest offers/availability : https://bit.ly/2O3hG0X
- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
SKU: PGI-00162126 -
Arduino Modules
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Adopt imported controller PL2303HX,which can stabilize the flash with high speed
- 500mA self recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
- The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
- so that the board won’t burnt down by material short cut.
- Electrostatic package,insures the board will not be damaged before use
Support WIN7 system
SKU: PGI-0044534 -
-
Temperature and Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
Ask for latest offers/availability : https://bit.ly/3bBwavq
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: PGI-0012249 -
Microcontrollers
AT89S51 40-Pin 24MHz 4kb 8-bit Microcontroller
- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 128 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low-power Idle and Power-down Modes
- 40-pin DIP
SKU: n/a -
