Arduino Boards
Showing all 24 results
-
Arduino Boards, Prayog Blaster
ARDUINO 101
- Industrial 101 integrates an ATmega32U4.
- the Atheros AR9331 SoC to make a dependable evaluation resource.
- the LGA module supports a Linux distribution based on OpenWRT named LininoOS.
- The board has built-in WiFi (IEEE 802.11b/g/n operations up to 150Mbps 1×1 2.4GHz).
SKU: n/a -
Arduino Boards
Arduino Portenta H7 Development Board
Ask for Latest offer / Availability : https://bit.ly/34uiwaW
- DUAL CORE – The PH7 has two processors in one, run parallel tasks in different languages
- SELECT ENCRYPTION – Choose between two vendors for the crypto-chip that better suits your case
- USB-C – Power your board, connect it to a display, or get it to work in OTG mode
- MEMORY RANGE – Select the right amount and type of memory for your application
SKU: PGI-800607 -
Arduino Boards, Prayog Blaster
Arduino Yun Atmega32u4 Microcontroller Development Board
- The Arduino Compatible Yun
- Built-in Ethernet
- WiFi support
- A USB-A port
- Micro-SD card slot
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- A 16 MHz crystal oscillator
- A micro USB connection
- An ICSP header
- A 3 reset buttons
SKU: n/a -
-
Arduino Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
– Digital I/O Pins: 12 (D2~D13)
– Analog Input Pins: 8 (A0~A7)
– TTL serial data receive and transmit pins: RX/TX
– PWM Output Pins: 6 (D3/D5/D6/D9/D10/D11)
– Microcontroller: Atmel Atmega328P-AUSKU: n/a -
-
Arduino Boards
Olimex Duinomite-Mini PIC32MX795 PIC 32Bit
Ask for Latest offer / Availability : https://bit.ly/3cVJJHw
- PIC32MX795 microcontroller
- micro SD card
- USB connector
- VGA connector
- PS-2 keyboard connector
- Arduino like format i.e. can work with Arduino shields
- UEXT connector i.e. can work with all our modules
SKU: PGI-11133 -
Arduino Boards
Original Arduino Due Board
Ask for latest offers/availability : https://bit.ly/2yXbjEi
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
- 512KBytes of flash memory for code
- A DMA controller, that can relieve the CPU from doing memory intensive tasks.
SKU: n/a -
Arduino Boards
Original Arduino Mega 2560 ATmega2560 MCU Rev3
Ask for latest offers/availability : https://bit.ly/3bSwF4o
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
SKU: n/a -
Arduino Boards
Original Arduino Micro without Headers
Ask for latest offers/availability : https://bit.ly/2VPeHdm
- Manufacturer: Arduino Officials
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
SKU: n/a -
-
Arduino Boards
Original Arduino Nano
Ask for latest offers/availability : https://bit.ly/3bNmyOa
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Arduino Boards
Original Arduino Uno Rev3
Ask for latest offers/availability : https://bit.ly/2z1qT1y
- Manufacturer: Arduino Officials
- Micro-controller : ATmega328P.
- Operating Voltage: 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
SKU: n/a -
Arduino Boards
Original Arduino UNO WiFi REV2
Ask for latest offers/availability : https://bit.ly/2YlXVEA
- Microcontroller: ATMEGA4809
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 Provide PWM Output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 20mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 48KB (ATMEGA4809)
- SRAM: 6,144KB (ATMEGA4809)
- EEPROM: 256 Bytes (ATMEGA4809)
- Clock Speed: 16MHz
SKU: n/a -
Arduino Boards
pcDuino3B – 1GHz Cortex Dual Core 1G RAM, Compatible With Arduino
Ask for Latest offer / Availability : https://bit.ly/3nbEk3O
- 100% compatible with original Arduino Shields
- 100% compatible with Linux and Android
- Further support for:
- C, C ++ with GNU tool
- Java with standard Android SDK Python
- Arduino pin header, Arduino UNO Slots: 14x GPIO, 2x PW M, 6x ADC, 1x UART, 1xSPI, 1x I2C
- Ethernet 10M/100Mbps, WiFi, SATA
SKU: PGI-3331 -
-
Arduino, Arduino Boards, Prayog Blaster
Prototype Shield Expansion Board with SYB-170 Mini Breadboard Base for Arduino UNO Proto Shield
Arduino, Arduino Boards, Prayog BlasterPrototype Shield Expansion Board with SYB-170 Mini Breadboard Base for Arduino UNO Proto Shield
- Used in conjunction with the Duemilanove protoshield prototype expansion board
- With self-adhesive tape on the back of miniboard, easy to stick on the Arduino prototype shield
- Circuit used for building prototype can be directly soldered on the board
- You can also connect the above mini breadboard circuit
- Bread board and circuit board via double-sided adhesive connections, soldered breadboard and the circuit board are separated
SKU: n/a -
Arduino, Arduino Boards, Prayog Blaster
Uno R3 Board with Usb cable For Robotic Project
- Microcontroller ATmega328P.
- Operating Voltage : 5V.
- Digital I/O Pins.
- 14 (of which 6 provide PWM output).
- PWM Digital I/O Pins .6 Analog Input Pins .6.Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader.
SKU: n/a -
Arduino Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
Ask for Latest offer / Availability : https://bit.ly/2SWkdbK
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Arduino Boards, Prayog Blaster
uno R3 with Usb Cable
- Microcontroller board based on the ATmega328 (datasheet)
- 14 digital input/output pins
- 16 MHz crystal oscillator
- USB connection
- Microcontroller board based on the ATmega328 (datasheet)
- 14 digital input/output pins
- 16 MHz crystal oscillator
- USB connection
- Made In Italy
SKU: n/a