Raspberry PI
Showing all 13 results
-
Raspberry PI
5MP OV5647 Sensor Adjustable Wide Angle Fish-eye Lens Night Vision Camera for Raspberry Pi 3 B+
Raspberry PI5MP OV5647 Sensor Adjustable Wide Angle Fish-eye Lens Night Vision Camera for Raspberry Pi 3 B+
- Wide angle fish-eye lens
- Manual Adjustable Focus
- Easy to install and Use
- Useful for real-time Photography and Videos
SKU: n/a₹1,150.00₹1,399.00incl. GST -
Raspberry PI
5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi 3 Model B.
-
Plug-n-Play camera for Raspberry Pi 3 Model B.
SKU: n/a₹555.00₹699.00incl. GST -
Raspberry PI
5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi Zero W.
-
Directly plug into Raspberry Pi Board (besides HDMI port)
SKU: n/a₹675.00₹800.00incl. GST -
Raspberry PI
Advanced Learning Kit For Raspberry Pi
- If you are a fan of arduino, however, arduino and Raspberry Pi is the best partner.
- You can make more creative DIY work through resource arduino strong community support.
- A wealth of third-party libraries into the Raspberry Pi and powerful features allow you to support a steady stream of ideas and inspiration.
SKU: n/a₹9,199.00₹10,000.00 -
Electronic Components & IC's, Raspberry PI
DIY Ultra Slim Low Noise Active Cooling Mini Fan for Raspberry Pi 3 Model B / 2B / B+
Electronic Components & IC's, Raspberry PIDIY Ultra Slim Low Noise Active Cooling Mini Fan for Raspberry Pi 3 Model B / 2B / B+
- Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2
- Connector: 2 pin
- Rated Voltage: DC 5V
- Current: 0.2A
SKU: n/a₹120.00₹140.00 -
PI Accessories
PN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
- Small size, it is easy to embed into your designs
- Support for I2C, SPI, HSU (high-speed UART), you can easily switch between these communications, you can easily switch the communication through the lower left corner of the board toggle switch, detailed operation method can refer to the product manual
- Work in NFC Mode or RFID reader / writer Mode
- Mifare 1k, 4k, Ultralight, and DesFire card
- ISO / IEC 14443-4 cards, such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards, such as IRT5001 card
- FeliCa cards, such as RCS_860 and RCS_854
- Plug and Play compatible.
SKU: n/a₹435.00₹450.00 -
PI Accessories
PN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
- Small dimension and easy to embed into your project
- Support I2C, SPI and HSU (High Speed UART), easy to change between those modes
- Support RFID reading and writing, P2P communication with peers, NFC with Android phone
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Up to 5cm~7cm reading distance
- On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Arduino compatible, plug in and play with our shield
SKU: n/a₹915.00₹950.00 -
PI Boards
Raspberry Pi 3 – Model B with 1GB RAM
- 1.2GHz Quad-Core ARM Cortex-A53 With 1GB RAM and 64 Bit CPU
- 802.11 bgn Wireless LAN and Bluetooth 4.1
- 4 x USB ports ,4 pole Stereo output and Composite video port and 40 Pin Extended GPIO To Enhance Your “Real World” Projects
- Camera interface (CSI), Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), Video Core IV 3D graphics core
- Micro SD slot for storing information and loading your operating systems
SKU: n/a₹3,260.00₹3,350.00 -
PI Accessories
Raspberry Pi3 Case Abs enclosure for Pi3 Board Case
- Case for the Raspberry Pi from the Raspberry Pi Foundation
- Removable Lid for easy access to the camera and display ports
- Removable Side Panels with easy access to the GPIO port
- Removable Top Frame
- Brand:Raspberry PI
- Form Color:Red+White
- Material:ABS
SKU: n/a₹450.00₹500.00
