Shop
Showing 1–24 of 1803 results
-
RF TRANSMITTER AND RECEIVERS
0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
RF TRANSMITTER AND RECEIVERS0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
Ask for latest offers/availability : https://bit.ly/2KZQKde
- Operating frequency: 0.1-2000MHz
Amplifier gain:
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
SKU: n/a - Operating frequency: 0.1-2000MHz
-
-
Arduino Display
0.96″ Blue SPI Serial 128X64 OLED LCD Display Screen
- Operating Voltage: 3.3~5VDC
- Connects via I2C to any microcontroller or single-board computer
- Works with ESP8266, Arduino, 8051, MSP420, STM32, Raspberry Pi!
- Pixel Color: blue. Resolution: 128×64 pixels; Size: 0.96in (diagonal)
- Built-in SSD1306 driver; I2C address: 0x3C
SKU: n/a -
Relay
1 channel 5V 10A Relay Control Board Module with Optocoupler
Ask for latest offers/availability : https://bit.ly/3e35PXP
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: n/a -
-
Relay
1 Road/Channel Relay Module (with light coupling) 12V
Ask for latest offers/availability : https://bit.ly/3e1595i
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay
1 Road/Channel Relay Module (with light coupling) 24V
Ask for latest offers/availability : https://bit.ly/2To61t4
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
wires & cable
1.27mm 26AWG Pure Copper 40pin Dupont Wire Flexible Rainbow Color Flat Ribbon Cable – 5 Meter
wires & cable1.27mm 26AWG Pure Copper 40pin Dupont Wire Flexible Rainbow Color Flat Ribbon Cable – 5 Meter
- Length: 5 Meter
- Weight: 450 gm
- Diameter(Pitch): 1.27 mm
- Conductor Material: Copper.
- Compatible with 1.27mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: n/a -
-
Break out Boards
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Break out Boards1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Ask for latest offers/availability : https://bit.ly/2yxxvFq
- Input voltage 0.8-3.3V output voltage 3.3V
- Maximum output current: 500 mA
- Starting voltage 0.8V, output current 10mA
- Input more than 3 v, and have spent 5V output of 400-400 mA
- Operating frequency: 150KHZ
- Typical conversion efficiency: 85%
SKU: n/a -
Hardware & Tools, Magnet, Prayog Blaster
10 mm x 2 mm Rectangle Strong Neodymium Magnets
- Acoustic field: the speaker, receiver, microphone, alarm, stage audio, car audio and so on.
- Electronics: permanent magnetic actuator vacuum circuit breakers, magnetic relays,meter sound meter, a reed switch, sensors.
- Electrical field: VCM, CD / DVD-ROM, generators, motors, servo motors, micro-motors, motors, vibration motors.
- Machinery and equipment: magnetic separation, magnetic crane, magnetic machinery.
SKU: n/a
