Break out Boards
Showing all 23 results
-
Break out Boards
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Break out Boards1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Ask for latest offers/availability : https://bit.ly/2yxxvFq
- Input voltage 0.8-3.3V output voltage 3.3V
- Maximum output current: 500 mA
- Starting voltage 0.8V, output current 10mA
- Input more than 3 v, and have spent 5V output of 400-400 mA
- Operating frequency: 150KHZ
- Typical conversion efficiency: 85%
SKU: PGI-00406344 -
Break out Boards
ADS1115 16-Bit ADC-4 Channel with Programmable Gain Amplifier
Ask for latest offers/availability : https://bit.ly/2zqGSXe
- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: PGI-0043582 -
-
Break out Boards
CJMCU-TRRS 3.5mm Jack AV Stereo Module
Ask for latest offers/availability : https://bit.ly/3fzzbic
- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- Dimensions: 20 x 16 x 8(L x W x H) mm
- Weight: 2 gm
SKU: PGI-0031293 -
Break out Boards
CP2112 debug board USB to I2C Communication Module
Ask for latest offers/availability : https://bit.ly/2Ab0ajP
- On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output
- Compliant with USB specification 2.0 standard; full speed (12Mbps)
- USB suspend status via SUSPEND and /SUSPEND pins
- Integrated 194-byte one-time programmable ROM for storing customizable product information
SKU: PGI-00617815 -
Break out Boards
Cytron Breakout USB A Type Male – Good Quality
Ask for latest offers/availability : https://bit.ly/2zrpCS0
- This is a breakout board for USB Connector A-Type. It is pre-soldered with the USB connector. Pins are broken out to 0.1″ for easy mounting on breadboard or donut board. Ideal for USB DIY project.
SKU: PGI-007442 -
Break out Boards
DC Power Module DC Power Adapter Plate
Ask for latest offers/availability : https://bit.ly/2YPQtBE
- Compatible with connector size: 5.5×2.1 mm.
- Weight: 2 gm
- Power output interface: 2 VCC, 2-way GND
- Reliable and safe connection
- Size: 26×12×13(L×W×H) mm
- Hole Diameter: 6.5mm
- Pin Diameter: 2.1mm
- It has wide use for safe and reliable connection between various Application and power sources
SKU: PGI-0031280 -
Break out Boards
ESP-01 Adapter 3.3V 5V Board
Ask for latest offers/availability : https://bit.ly/2SReBQB
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: PGI=0062434 -
Break out Boards
Frequency Adjustable Pulse Generator Module NE555
Ask for latest offers/availability : https://bit.ly/2SNiV3g
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 3 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
SKU: PGI-0031287 -
Break out Boards
I2C Bi-Directional logic Level Converter- 4 Channel
Ask for latest offers/availability : https://bit.ly/2WjWUvk
- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
SKU: PGI-0016919 -
Break out Boards
ICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module
Break out BoardsICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module
Ask for latest offers/availability : https://bit.ly/2SRmjtZ
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
SKU: PGI-0051717 -
Break out Boards
JoyStick Breakout Module For PS2 Arduino
Ask for latest offers/availability : https://bit.ly/2Wik8Sm
- User can use 3-pin ARDUINO special line really plugged into the expansion board for Use.
- Its type is digital switch
- Cross rocker is a bi-directional 10K resistor
- the original state of X, Y read-out voltage of 2.5V or so
SKU: PGI-00200 -
-
Break out Boards
Micro SD Card Reader Module
Ask for latest offers/availability : https://bit.ly/2xMzwgm
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
SKU: PGI-0011566 -
-
Break out Boards
Mini Digital Power Amplifiers 3W Dual Track Red PAM8403
Ask for latest offers/availability : https://bit.ly/2zqRy8d
- Input Voltage : 2.5-5.5 V(USB power supply).
- Output Impedance : 4 ohm.
- Efficiency : 90%.
- Frequency Response : 150 Hz – 20 KHz.
- Input Impedance : 2 Kohm.
- Dimensions : 15 x 20 mm.
SKU: PGI-0031250 -
Break out Boards
Mini Micro SD Card Reader Module
Ask for latest offers/availability : https://bit.ly/3chO7j3
- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
SKU: PGI-00699588 -
Break out Boards
MP3-TF-16P MP3 SD Card Module with Serial Port
Ask for latest offers/availability : https://bit.ly/2Wgyl21
- Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
- 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
- Fully supports FAT16, FAT32 file system
- Maximum support 32G TF card
- Support U disk to 32G, 64M bytes of NORFLASH
- A variety of control modes are available. IO control mode, serial mode, AD key control mode
SKU: PGI-0031193 -
Break out Boards
PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output
Ask for latest offers/availability : https://bit.ly/3bgEKyJ
- Dual-Channel Stereo Output
- Run-on 7V to 15V power Supply
- 32 Steps DC volume control has a +32dB to -75dB range.
- 40pin QFN 6 x 6 mm package.
- Much higher efficiency in terms of cost and performance than competitors’ ICs
SKU: PGI-0043918 -
Break out Boards
SeeedStudio Grove Thumb Joystick
Ask for latest offers/availability : https://bit.ly/2zpufM2
- Analog output
- Output analog value (X co-ordinate): 206-798, typical 516
- Output analog value (Y co-ordinate): 203-797, typical 507
- Grove compatible with 4 pin universe 2.0mm connector
SKU: PGI-00599406 -
Break out Boards
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.
Ask for latest offers/availability : https://bit.ly/3cj3KXs
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
SKU: PGI-0031380 -
Break out Boards
USB Type A Breakout Board – Male
Ask for latest offers/availability : https://bit.ly/2SJHluD
- If you want to add a standard type A USB male plug to your project, this breakout board is for you. As simple as it is, this board breaks out all 4 pins of the USB connector into more manageable 2.54mm pitch soldering holes. You can then solder a 4-pin header to plug into a breadboard or solder wires directly to the holes.
SKU: PGI-0042887 -
Break out Boards
W25Q64 Storage 64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
Ask for latest offers/availability : https://bit.ly/3chAMat
- IC: W25Q64FV
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
SKU: PGI-00411810 - IC: W25Q64FV