Arduino Shield
Showing all 6 results
-
Arduino Shield
ADK USB Host Shield compatible with Arduino
Ask for Latest offer / Availability : https://bit.ly/3oiALrM
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: PGI-003366 -
Arduino Shield
Cytron G15 Shield
Ask for Latest offer / Availability : https://bit.ly/2M3VSkH
-
Arduino reset button
-
4 x G15 Cube Servo ports.
-
External power port for a servo with polarity protection
-
Stackable I/O header pin
-
Selectable digital pins for the control pin with mini jumpers
-
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
-
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: n/a -
-
Arduino Shield
MINI USB Host Shield 2.0 ADK
- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: n/a -
Arduino Shield
SmartElex PS2 Sheild for Arduino
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a -
Arduino, Arduino Shield
SmartElex PS2 Sheild for Arduino
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a -
Arduino Shield
Yun Shield V2.4
Ask for Latest offer / Availability : https://bit.ly/3qPOHLy
- Open source Linux (OpenWrt) inside
- Low power consumption
- Support Passive PoE Injector.
- Managed by Web GUI, SSH via LAN or WiFi
- Software upgradeable via network
- Built-in web server
- Support internet connection via LAN port, WiFi or 3G dongle.
- Support USB flash to provide storage for Arduino projects.
- Failsafe design provides a robust system.
- Compatible with Arduino Leonardo, Uno, Duemilanove, Diecimila, Mega, Due, Teensy,
- Compatible with Arduino IDE
SKU: PGI-00127767
