Relay
Showing 1–24 of 68 results
-
Relay
1 channel 5V 10A Relay Control Board Module with Optocoupler
   Ask for latest offers/availability : https://bit.ly/3e35PXP
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: n/a -
Relay
1 Road/Channel Relay Module (with light coupling) 12V
   Ask for latest offers/availability : https://bit.ly/3e1595i
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay
1 Road/Channel Relay Module (with light coupling) 24V
   Ask for latest offers/availability : https://bit.ly/2To61t4
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay
12V 1 Channel Relay Module
   Ask for latest offers/availability : https://bit.ly/2LLPGtS
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
SKU: n/a -
Relay
12V 4 Channel Relay Module
   Ask for latest offers/availability : https://bit.ly/2ZnoWYM
- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
SKU: n/a -
Relay
12V 6 Channel with Light Coupling Relay Module
    Ask for latest offers/availability : https://bit.ly/2WPq85n
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay
12V 8 Channel Relay Module
   Ask for latest offers/availability : https://bit.ly/3ghktNg
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: n/a -
Relay
12V Dual Channel Relay Module (with Light Coupling)
   Ask for latest offers/availability : https://bit.ly/36eYh1q
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: n/a -
Relay
220VAC/28VDC 10A RES MK3P-3 Electromagnetic Relay, 11-pin 3PDT
   Ask for latest offers/availability : https://bit.ly/2LLdXQE
- 10A switching capability(2C,3C type)
- Long life(Min.100,000 electrical operations)
- Industry standard 8 or 11 round terminals
- Environmental friendly product (ROHS compliant).
SKU: n/a -
-
Relay
24V 16 Channel Relay with Light Coupling
   Ask for latest offers/availability : https://bit.ly/3cOFfSb
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- A freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
-
Relay
24V 4-Channel Relay Module (with Light Coupling)
   Ask for latest offers/availability : https://bit.ly/2X8Y4c8
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: n/a -
Relay
24V 6 channel with light coupling relay
   Ask for latest offers/availability : https://bit.ly/3cOYkUl
- 2V relay with AC contact capacity of 10A 250V and optocoupler protection.
- The onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full-on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
SKU: n/a -
-
Electronic Components & IC's, Prayog Blaster, Relay
4 Channel 5V 10A Relay Board Module Relay Expansion Board For Arduino Raspberry pie
Electronic Components & IC's, Prayog Blaster, Relay4 Channel 5V 10A Relay Board Module Relay Expansion Board For Arduino Raspberry pie
- Weight: 30g
- PCB color black
- Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
- Relay high quality single relay single pole double throw
- A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
SKU: n/a -
Relay
4 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
   Ask for latest offers/availability : https://bit.ly/2TrzC4O
- Channel: 4 channel
- Relay Operating Voltage: 5V
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
SKU: n/a -
Relay
4 Road/Channel Relay Module (with light coupling) 12V
   Ask for latest offers/availability : https://bit.ly/36fPxs1
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: n/a -
Relay
5-36v Switch Drive High-power MOSFET Trigger Module
    Ask for latest offers/availability : https://bit.ly/2Tl51FJ
- This 5-36v Switch Drive High-power MOSFET Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,  solenoid valves, PWM, motor speed control, lamp brightness. etc.
SKU: n/a -
Relay
5V 1 Channel Relay Module
   Ask for latest offers/availability : https://bit.ly/2XiEt9m
- Operating Voltage: 5 V
- Max Current : 20 mA
- Relay Contact Current Capacity at 250 V AC: 10 A
- Relay Contact Current Capacity at 30 V DC: 10 A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
SKU: n/a -
Relay
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
   Ask for latest offers/availability : https://bit.ly/2ymC5pO
- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
SKU: n/a