Shop
Showing 1585–1608 of 1946 resultsSorted by price: high to low
-
IC's, Prayog Blaster
74HC595 – 8-bit Serial-to-Parallel Shift Register (pack of 5)
- Contains an 8-bit Serial-In Parallel-Out Shift Register that feeds an 8-bit D-type Storage Register
- Shift Register has Direct Clear
- Accurate from Dc to 20MHz
- 3-State Outputs
- Standard TTL Switching Voltages
SKU: PGI-001090251 -
Microcontrollers
Atmega8A-8PU Microcontroller
- 28-pin AVR Microcontroller
- Flash Program Memory: 8 kbytes
- EEPROM Data Memory: 512 bytes
- SRAM Data Memory: 1 kbytes
- I/O Pins: 23
- Timers: Two 8-bit / One 16-bit
- A/D Converter: 10-bit Six Channel
- PWM: Three Channels
- RTC: Yes with Separate Oscillator
- MSSP: SPI and I²C Master and Slave Support
- USART: Yes
- External Oscillator: up to 8MHz
SKU: n/a -
Break out Boards
JoyStick Breakout Module For PS2 Arduino
Ask for latest offers/availability : https://bit.ly/2Wik8Sm
- User can use 3-pin ARDUINO special line really plugged into the expansion board for Use.
- Its type is digital switch
- Cross rocker is a bi-directional 10K resistor
- the original state of X, Y read-out voltage of 2.5V or so
SKU: PGI-00200 -
-
Microcontrollers
PIC16F628A Microcontroller
- High-Performance RISC CPU
- Only 35 single word instructions to learn
- All instructions are 1µs (@4MHz) except for program branches
- Operating speed: DC – 20MHz clock input
- 2 kBytes Flash Program Memory
- 224 Byte RAM Data Memory
- 128 Byte EEPROM Data Memory
- In-circuit serial programming
- Peripheral Features
- Universal Synchronous/Asynchronous Receiver/Transmitter (USART)
- Two 8-bit timer/counter(TMR0,TMR2) with 8-bit programmable prescalar
- One 16 bit timer/counter
- High current source/sink for direct LED drive
- Watchdog Timer (WDT) with separate RC oscillator
- Two Analog Comparators
- Capture/Compare PWM (CCP) Module
- 16 Bytes of common RAM
- Special Microcontroller Features
SKU: n/a -
Power Connector
6 Pin 5.08mm Pitch Pluggable Screw Terminal Block (Pack of 3)
Ask for Latest offer / Availability : https://bit.ly/37SPt3N
- Saves space due to the small design
- Screw connection with tension sleeve
- Maximum contact force ensures a low-temperature rise
- Connection in accordance with EN-VDE Standard.
SKU: n/a -
3D Accessories
CNC 3D Printer Mech Endstop Switch For RepRap Makerbot Prusa Mendel RAMPS1.4
Ask for Latest offers/availability : https://bit.ly/3o6LBVv
The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin .100″” pitch header and accepts a standard, old-style CD-ROM audio connector cable. Brand new and high quality. The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.
SKU: PGI-0012030 -
-
Bo Motor, Motors | Drivers | Actuators Categories
150 RPM Single Shaft Straight Plastic Gear BO Motor
Bo Motor, Motors | Drivers | Actuators Categories150 RPM Single Shaft Straight Plastic Gear BO Motor
Ask for Latest offers/availability : https://bit.ly/3httULu
- DIY Projects.
- Battery-operated toys.
- Disk drives Steel rolling mills Paper.
- Machines Medical equipment.
- Radio-controlled aircraft.
- Automobiles Drive systems Positioning.
- Industrial and consumer actuators Winches Robotics Mixers.
- Robotic projects.
SKU: n/a -
Electronic Switches/Keypad
DC 12V 4×4 16 Key Matrix Membrane Switch Keypad
Ask for latest offers/availability : https://bit.ly/3e9PP6p
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
SKU: n/a -
Wearable Electronics
LilyPad Tri-Color LED RGB Module for Arduino
Ask for latest offers/availability : https://bit.ly/3gc62Ke
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: PGI-0052476 -
-
-
Plugs & Connectors
3 Pin Pitch Plug-in Screw Terminal Block Connector (Pack of 5)
Ask for Latest offer / Availability : https://bit.ly/3vAIV2t
- Rust Free metal contact.
- High quality plastic caps for better grip.
- High current rating.
- Good quality Insulating material for shock proof mounting.
- Pin header: Tin plated brass.
- Contacts: Nickel plated brass.
- Strong, compact, lightweight.
- Heat resistant.
SKU: PGI-00155
