Shop
Showing 841–864 of 1946 resultsSorted by price: high to low
-
Vibration/Tilt Sensor
Piezo Vibration Sensor – Small Vertical
Ask for latest offers/availability : https://bit.ly/2W1f3fN
- Voltage Sensitivity (open-circuit, baseline): 1.1 V/g.
- Charge Sensitivity (baseline): 260 pC/g.
- Resonance Frequency: 75 Hz.
- Voltage Sensitivity (open-circuit, at resonance): 6 V/g.
- Upper Limiting Frequency (+3 dB): 42 Hz.
SKU: PGI-00637307 -
Generic Ultrasonic Sensor
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
Generic Ultrasonic SensorWaterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
Ask for latest offers/availability : https://bit.ly/3cOJFbt
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
SKU: PGI-0084338 -
Microcontrollers
P89V51RD2 – 40MHz Microcontroller 8-bit
- 80C51 CPU
- 5 V operating voltage from 0 MHz to 40 MHz
- 64 kB of on-chip flash user code memory with ISP and IAP
- Supports 12-clock (default) or 6-clock mode selection via software or ISP
- SPI and enhanced UART
- PCA with PWM and capture/compare functions
- Four 8-bit I/O ports with three high-current port 1 pins (16 mA each)
- Three 16-bit timers/counters
- Programmable watchdog timer
SKU: n/a -
Quad Copter & Multi Rotors
SimonK 30A Brushless Speed Controller ESC Multicopter Helicopter Airplane – Good Quality
Quad Copter & Multi RotorsSimonK 30A Brushless Speed Controller ESC Multicopter Helicopter Airplane – Good Quality
Ask for Latest offer / Availability : https://bit.ly/3aXvjF8
- Model: DYS 30A Brushless ESC.
- Constant Current: 30 A.
- Burst Current: 40A for 10 sec.
- BEC: 5V / 2A.
- Suitable Batteries: 2~4S.
- Color: Black/ Blue.
SKU: PGI-0045713 -
-
Tyres & Wheels
EasyMech Heavy Duty(HD) Disc Wheel 100mm Dia – 1Pcs(Yellow Color) 0 Review(s)
- 100% branded Robotic wheels.
- It features high-quality material.
- Each wheel is tested for loads up to 20kg.
- It comes with Silicon rubber grip for excellent traction.
- Internal Diameter(ID): 11 mm
- Load Capacity: 20 kg/wheel
- Tyre Grip Material: Silicon Rubber.
- Wheel Body Material: ABS + 20% Glass Fiber.
SKU: n/a -
Ammeter and Voltmeter
0.28 inch Digital Voltmeter Ammeter DC 100V 50A LED Amp Volt Meter With Shunt
Ask for Latest offer / Availability : https://bit.ly/3kRGUel
- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-50A
- Easy to read even in dim light
SKU: PGI-0043398 -
IC's
LM3915 – Dot/Bar Display Driver (pack of 3 )
Ask for Latest offer / Availability : https://bit.ly/3p8f13c
- Provides a Logarithmic 3dB Analog Display from Analog Voltage Input
- Drives LED’s, LCD’s or Vacuum Flourescents
- Bar or Dot Display Mode
- Expandable to 100 Steps
- Internal Voltage Reference from 1.2V to 12V
- Operates with single supply of 3V to 25V
- Inputs operate down to ground
- Output current programmable from 1 mA to 30 mA
- Input withstands ±35V without damage or false outputs
- Outputs are current regulated, open collectors
- Directly drives TTL or CMOS
- The internal 10-step divider is floating and can be referenced to a wide range of voltages
SKU: n/a -
IC's
L293D DIP Motor Driver IC (pack of 10 )
Ask for Latest offer / Availability : https://bit.ly/3qDX2lB
- Wide range of supply voltage from 4.5 to 36v
- Separate Input Logic Supply can be provided
- Output Current per channel 1A for L293 and 600mA for L293D
- Peak Current per channel 2A for L293 and 1.2A for L293D
- Output Clamp diodes are provided to drive inductive loads in L293D.
- Automatic Thermal Shutdown
SKU: n/a -
Prayog Blaster
Basic Arduino DIY Innovation KIT (25 in 1 Economic KIT)
Ask for Latest offers/availability : https://bit.ly/30enE1n
- 25 in 1 DIY Innovation combo KIT
- Best Economic kit for Beginner students
- KIT Contains all Basic electronic Parts
- KIT Contains Arduino as well as some Basic Sensors
SKU: PGI-0038 -
Quad Copter & Multi Rotors
A2212 10T 13T 2200KV Brushless Motor for Drone (Soldered Connector)
Ask for Latest offers/availability : https://bit.ly/3l6ZPDP
- Model: A2212/10T/13T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
SKU: n/a -
Audio Module
TEA5767 Stereo FM Radio Module with Detachable Antenna
Ask for latest offers/availability : https://bit.ly/2LVrghu
- Directly plug antenna interface.
- I2C bus communication.
- Multi-capacitor combined filter.
- Blue LED power indicator.
- High sensitivity(low noise RF input amplifier).
- High power auto gains control AGC circuit.
SKU: n/a -
-
Relay
8 Road/Channel Relay Module (with light coupling) 24V
Ask for latest offers/availability : https://bit.ly/2LcLnaE
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: PGI-0031236 -
AI Thinker Esp Wifi Modules
Ai Thinker ESP32-S WiFi+BT SoC Module
Ask for latest offers/availability : https://bit.ly/2SgWIdJ
- Manufacturer: Ai-Thinker
- 802.11b/g/n Wi-Fi+BT SOC
- Dual-core 32-bit CPU, 240 MHz frequency
- Built-in two 12 bit SAR ADCs, up to 18 channels
- Supports UART/SPI/I2C/SDIO/GPIO/ADC/PWM
- SMD38 package
- Supports OpenOCD debug interface
- UART baud rate up to 4Mbps
SKU: PGI-00648885 -
Current and Voltage Sensor
SCT-013-060 Non-invasive AC Current Sensor Clamp Sensor 60A
Ask for latest offers/availability : https://bit.ly/3cGGfqY
- Input current (RMS): 60A.
- Max current: 75A.
- Work temperature: -25℃～+70℃.
- Storage temperature: -30℃～+90℃.
- Work voltage: 660V.
- Frequency range: 50Hz-1KHz.
- Dielectric strength: 3.5KV 50Hz 1min
SKU: PGI-00618494 -
Rfid Card, Tags & Readers
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader
Ask for latest offers/availability : https://bit.ly/353tQe3
- Frequency: 125Khz.
- Support μEM4001, 4100, or its compatible RFID, ID card.
- Read first 10 digits of the RFID/Proximity card.
- Support Windows95/98/2000/XP/7/8.
- Plug and Play
- Reliable working condition
- Powered directly from USB, no need external power supply
SKU: PGI-0043434 -
Rfid Card, Tags & Readers
PN532 NFC RFID Read / Write Module V3 Kit
Ask for latest offers/availability : https://bit.ly/3azPB6m
- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
SKU: n/a -
Arduino Shield
MINI USB Host Shield 2.0 ADK
- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: n/a -
Sensors
FlexiForce A101 Force Sensor
Ask for Latest offers/availability : https://bit.ly/3m20Ax6
The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125462 -
Raspberry Pi Accessories
PN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Raspberry Pi AccessoriesPN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Ask for Latest offer / Availability : https://bit.ly/39i11gN
- Small size, it is easy to embed into your designs
- Support for I2C, SPI, HSU (high-speed UART), you can easily switch between these communications, you can easily switch the communication through the lower left corner of the board toggle switch, detailed operation method can refer to the product manual
- Work in NFC Mode or RFID reader / writer Mode
- Mifare 1k, 4k, Ultralight, and DesFire card
- ISO / IEC 14443-4 cards, such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards, such as IRT5001 card
- FeliCa cards, such as RCS_860 and RCS_854
- Plug and Play compatible.
SKU: PGI-00699611 -
Vibration/Tilt Sensor
Piezo Vibration Sensor – Small Horizontal
Ask for latest offers/availability : https://bit.ly/3bHWljZ
- Voltage Sensitivity (open-circuit, baseline): 1.1 V/g.
- Charge Sensitivity (baseline): 260 pC/g.
- Resonance Frequency: 75 Hz.
- Voltage Sensitivity (open-circuit, at resonance): 6 V/g.
- Upper Limiting Frequency (+3 dB): 42 Hz.
SKU: PGI-00637306
