Shop
Showing 865–888 of 1946 resultsSorted by price: high to low
-
Raspberry Pi Camera
5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
Ask for Latest offer / Availability : https://bit.ly/3uMXTDq
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi Zero W.
-
Directly plug into Raspberry Pi Board (besides HDMI port)
SKU: PGI-0051705 -
Tyres & Wheels
EasyMech 100mm Modified Heavy Duty(HD) Disc Wheel Grey – 1Pcs
Ask for Latest offer / Availability : https://bit.ly/2LCz5IF
- 100% branded Robotic wheels.
- It has 6 holes for attaching it with couplings like HUB or ANTI-SLIP.
- Each wheel is tested for loads up to 20kg.
- It comes with Silicon rubber grip for excellent traction.
- Internal Diameter(ID): 11 mm
- Load Capacity: 20 kg/wheel
- Tyre Grip Material: Silicon Rubber.
- Wheel Body Material: ABS + 20% Glass Fiber.
SKU: n/a -
Tyres & Wheels
EasyMech 100MM MODIFIED Heavy Duty(HD) DISC Wheel Yellow – 1Pcs
Ask for Latest offers/availability : https://bit.ly/3miYlGb
- 100% branded Robotic wheels.
- It has 6 holes for attaching it with couplings like HUB or ANTI-SLIP.
- Each wheel is tested for loads up to 20kg.
- It comes with Silicon rubber grip for excellent traction.
- Internal Diameter(ID): 11 mm
- Load Capacity: 20 kg/wheel
- Tyre Grip Material: Silicon Rubber.
- Wheel Body Material: ABS + 20% Glass Fi
SKU: PGI-0058577 -
Arduino Boards
Nano Board V3.0 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Arduino BoardsNano Board V3.0 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Ask for Latest offer / Availability : https://bit.ly/3sv1y6O
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: PGI-0030888 -
-
-
BLUETOOTH
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
Ask for latest offers/availability : https://bit.ly/2VUvlYZ
- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: PGI-0051733 -
Motors | Drivers | Actuators Categories
65mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories65mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offers/availability : https://bit.ly/3mGnWsB
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 65mm
SKU: PGI-0046496 -
Chargers
I max B3 charger for Drone Lipo Battery Charging
Ask for Latest offer / Availability : https://bit.ly/3t3MvkV
- Input voltage: AC 110V-240V. Balance charge current: 850mA
- Display: Green Red LED. Max.charge current:3*800mA
- Connect the B3 Pro charger to power,charger works in good order whilenbsp;three power LEDs will turn from red to green. Please connect the battery pack to 3s balance port , while the three power LEDs will all turn into red and charging begins. Please note once the charging of one cell is done, the corresponding power LED for it will turn green.
- When the three power LEDs all turn green, the charging for 3S battery pack is finished. Net weigt: 89 g / 3.14 oz. Size: 90 x 57 x 35 mm / 3.54 x 2.24 x 1.38 inch. Product.
SKU: n/a -
Autonics Sensor
Autonics PR18-8DN DC10~30 8mm M18 Inductive Proximity Sensor NPN-NO (Unshielded)
Ask for latest offers/availability : https://bit.ly/3eLlqg6
- Operating Voltage (VDC): 10 ~ 30
- Detection Distance (mm): 8
- Outer Thread Size: M18
- Object Type: Inductive
- Output Type: NPN Normally Open Three-line
- Installation Type: Non Flush (Unshielded)
- Max Output Current: 200 mA
- Setting Distance (mm): 0 ~ 5.6
SKU: PGI-00642322 -
Autonics Sensor
Autonics PR18-8DP DC 10~30 8mm M18 Inductive Proximity Sensor PNP-NO (Unshielded)
Ask for latest offers/availability : https://bit.ly/2xRP2HL
- Operating Voltage (VDC): 10 ~ 30
- Detection Distance (mm): 8
- Outer Thread Size: M18
- Object Type: Inductive
- Output Type: PNP Normally Open Three-line
- Installation Type: Non-Flush (Unshielded)
- Max Output Current: 200 mA
- Setting Distance (mm): 0 ~ 5.6
SKU: PGI-00642320 -
IC's
LM358 IC DIP-8 Chip IC Dual Operational Amplifier (Pack of 10)
Ask for Latest offer / Availability : https://bit.ly/2Y4uwx6
- Internal frequency compensation
- Low input bias current
- Low input offset voltage and offset current
- Common mode input voltage range, including the grounding
- Differential mode input voltage range, equal to the supply voltage range
SKU: n/a -
IC's
LM339 – Low Power Quad Comparator (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/2Y5f8R2
- High precisiocomparators
- Reduced VOS drift over temperature
- Eliminates need for dual supplies
- Allows sensing near GND
- Compatible with all forms of logic
- Power draisuitable for battery operation
SKU: n/a -
Temperature and Humidity Sensor
DHT22/AM2302 Digital Temperature & Humidity Sensor
Ask for latest offers/availability : https://bit.ly/3av5GdC
- Ultra-Low Power.
- No Additional Components.
- Long Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: ±2-5% RH.
- Temperature Measurement Precision: ±0.5 deg C.
SKU: PGI-00181464 -
-
Batteries
Microbotix – 11.1V 2200 mAh 18650 Lithium-ion 3S High Quality Rechargeable Battery Pack.
Ask for the Latest offers/availability: https://bit.ly/3rhuaQT
- SALIENT FEATURES
- 100% Efficient for charge and discharge Quick charge support
- Low weight
- 75C Temperature Protection & Discharge Eco friendly
- High Quality
SKU: PGI-0042 -
Batteries
Microbotix 7.4v 2000 mAh Lipo Battery Premium Quality
Ask for Latest offer / Availability : https://bit.ly/3uSOxpB
Rechargeable lithium-ion battery pack
Chemistry LCO Power (Wh) 7.4Wh
Nominal Voltage 7.4V
Nominal capacity 2000 mAh +/- 10%
Full Charge Voltage 8.4V
Discharge cut off voltage 5.8V
Maximum continuous discharging current 0.5mA @ 70% DoD
SKU: PGI-0034 -
Lipo Battery Checker
LY6W 12V to 24V Real-time Lithium Battery Power Monitor with White- Blue LCD
Ask for Latest offer / Availability : https://bit.ly/3oEdodq
- Dynamic Measure range for 12V 24V 36V 48V battery
- White Backlight LDC with Blue Characters
- Small and compact Dashboard design
- Plug and Play operation
SKU: PGI-00699584 -
-
Quad Copter & Multi Rotors
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
Ask for Latest offers/availability : https://bit.ly/3oGNyrN
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
- Application: BLDC Motors, Multirotor, Rc Planes etc.
SKU: PGI-005938 -
Relay
24V 6 channel with light coupling relay
Ask for latest offers/availability : https://bit.ly/3cOYkUl
- 2V relay with AC contact capacity of 10A 250V and optocoupler protection.
- The onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full-on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
SKU: PGI-00618389
