Shop
Showing 793–816 of 1946 resultsSorted by price: high to low
-
Motors | Drivers | Actuators Categories
4x DC 3.7V 716 7x16mm Micro Coreless Motor With Propeller High Speed Mini Drones
Motors | Drivers | Actuators Categories4x DC 3.7V 716 7x16mm Micro Coreless Motor With Propeller High Speed Mini Drones
Ask for Latest offers/availability : https://bit.ly/3FBvWUw
- Material: Metal+Plastic
- Color: Silver(Motor)+Propeller Color will be delivered randomly
- This is a rare motor, and the small motor torque is very large, which is the value of it.
- Note: when you install the propeller, press and hold the back of the motor to prevent damage to the motor. In order to prevent unnecessary loss, please buy another one for Spare, to prevent emergency
SKU: PGI - 0022127 -
Gsm/Gprs
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
Ask for latest offers/availability : https://bit.ly/2z7ibPw
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: n/a -
Break out Boards
ADS1115 16-Bit ADC-4 Channel with Programmable Gain Amplifier
Ask for latest offers/availability : https://bit.ly/2zqGSXe
- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: PGI-0043582 -
-
Multirotor motors, Quad Copter & Multi Rotors
2212 920KV Brushless DC Motor for DJI – Black Cap (CW Motor Rotation)
Multirotor motors, Quad Copter & Multi Rotors2212 920KV Brushless DC Motor for DJI – Black Cap (CW Motor Rotation)
Ask for Latest offers/availability : https://bit.ly/3Acposb
- Motor KV: 920 RPM/V.
- Motor Rotation: CW.
- Thrust: Around 0.5 kg
- LiPO Batteries: 3S-4S
- ESC: 30 A
- Shaft Diameter: 6 mm
SKU: PGI-0029727 -
Multirotor motors, Quad Copter & Multi Rotors
2212 920KV Brushless DC Motor for DJI – Silver Cap (CCW Motor Rotation)
Multirotor motors, Quad Copter & Multi Rotors2212 920KV Brushless DC Motor for DJI – Silver Cap (CCW Motor Rotation)
Ask for Latest offers/availability : https://bit.ly/3iO7sxp
- Motor KV: 920 RPM/V.
- Motor Rotation: CCW.
- Thrust: Around 0.5 kg
- LiPO Batteries: 3S-4S
- ESC: 30 A
- Shaft Diameter: 6 mm
SKU: n/a -
-
DISC WHEEL, Tyres & Wheels
EasyMech Heavy Duty(HD) Disc Wheel 100mm Diameter – 2Pcs(Yellow Color)
Ask for Latest offer / Availability : https://bit.ly/3jDzycY
- 100% branded Robotic wheels.
- It features high-quality material.
- Each wheel is tested for loads up to 20kg.
- It comes with Silicon rubber grip for excellent traction.
- Internal Diameter(ID): 11 mm
- Load Capacity: 20 kg/wheel
- Tyre Grip Material: Silicon Rubber.
- Wheel Body Material: ABS + 20% Glass Fiber.
SKU: PGI-81193 -
Lithium ION (Li-Ion) Batteries
Panasonic INR18650-30Q 3000mAh Li-Ion Battery
Ask for Latest offer / Availability : https://bit.ly/3dbQoyK
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
- No memory effect
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Lightweight, small size
SKU: n/a -
Wireless Smart Switch
Generic 12V One Channel RF Wireless Relay Module with Remote Control
Ask for latest offers/availability : https://bit.ly/3c2ppTr
- DC 12V Home lighting system
- Remote control switch
- Smart Home / Home Automation
- Garage Door
- Remote controlled gates
- Security Monitoring
- LED lighting
- Fluorescent lamp
SKU: n/a -
Temperature and Humidity Sensor
DHT22 Digital Temperature and Humidity Sensor Module AM2302
Ask for latest offers/availability : https://bit.ly/2yGaMXn
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: PGI-0030772 -
Current and Voltage Sensor
SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Current and Voltage SensorSCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Ask for latest offers/availability : https://bit.ly/2S5A5sz
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: PGI-0043399 -
Autonics Sensor
Autonics PR08-1.5DP DC 10~30 1.5mm M8 Inductive Proximity Sensor PNP-NO (Unshielded)
Ask for latest offers/availability : https://bit.ly/2VqKUYh
- Operating Voltage (VDC): 10 ~ 30
- Detection Distance (mm):1.5
- Outer Thread Size: M08
- Object Type: Inductive
- Output Type: PNP Normally Open Three-line
- Installation Type: Non-Flush (Unshielded)
- Max Output Current: 200 mA
- Setting Distance (mm): 0 ~ 1.05
SKU: PGO-00642328 -
Sound Sensor
SeeedStudio Grove Loudness Sensor
Ask for latest offers/availability : https://bit.ly/34RopyX
- Operating voltage: 3.5-10VDC (nominal 5V )
- Working frequency: 50~2000 Hz
- Sensitivity: -48 to 66 dB
- S/N ratio: >58 dB
- Output signal range: 0 – 1023 (Analog signal)
- Gain adjustable via screw potentiometer
- Wide supply voltage range
- Built-in signal filtering
SKU: PGI-00597665 -
-
Development Board
Arduino Nano PRATHAM 1.0 Development Board
Ask for Latest offer / Availability : https://bit.ly/2VbMpcY
- On-board ON/OFF switch and power LED
- Onboard Voltage Regulator for stable power supply
- Arduino Nano compatible (direct plug-in for Arduino Nano board)
- On-board direct plug-in for 16X2 Liquid Crystal Display with contrast adjustment
- On-board L293D Motor Driver chipset
- I2C communication pins available for IMU Sensor
- Pin header to connect Line Follower Sensor (up to an array of 6) with power pins
SKU: PGI-00567563 -
3D Accessories, Filaments
eSun 1.75mm Nozzle Cleaning Filament 100g-White
Ask for Latest offers/availability : https://bit.ly/3oaPfhd
- Excellent heat stability, Wide cleaning temperature range cleaning rods extrude normally at the temperature range of 150℃-260℃ when testing.
- With slight viscosity and enable it to take residual material out of the nozzle and no jamming in the nozzle
- Not easy to degradation in the heat.
- Using cleaning rods can prevent nozzle plugging during the transition between high and low-temperature material
SKU: PGI-00324799 -
3D Accessories
Dual H-bridge driver L293D Two DC motor or One Stepper Motor Module
Ask for Latest offers/availability : https://bit.ly/3ud0XZE
- Arduino / Raspberry Pi L293D H-Bridge 4 Channel Dc Motor Control Support Pulse With Modulation
- Tested in Arduino, Raspberry, IOIO & Node MCU
- Input Voltage: DC4.5v – 25V
- Output Current: 600mA Per Channel
- Peak Current: 1.2A Non Repetitive Per Channel Enable Facility
- IC Protection: Auto Shut on High Temperature
SKU: PGI-363 -
Sensors
SmartElex RLS05 Line Follower Sensor Module
Ask for Latest offers/availability : https://bit.ly/3mjDfal
- Operating Voltage Range: 9~12V
- Maximum Operating Current: 130 mA
- Optimal Sensing Distance: 0.125″ (3 mm).
- Fast response time
- High sensitivity
- 5 Analog and 5 Digital Output signals with Respective LED.
- Each IR has indicating LED (D0-D4).
- Available SPI and Serial communication Pins.
SKU: PGI-0074474 -
Break out Boards
ICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module
Break out BoardsICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module
Ask for latest offers/availability : https://bit.ly/2SRmjtZ
- Operating Voltage: 2.5-5.25 V
- Operating Temperature:20~70 °C
- Material: Plastic.
- Application: Electronic Circuits.
- Dimensions: 28 x 22 x 8 (LxWxH) mm
- Weight: 2 gm
SKU: PGI-0051717 -
Arduino, Arduino Shield
SmartElex PS2 Sheild for Arduino
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a -
Relay
SmartElex Battle Relay
Ask for latest offers/availability : https://bit.ly/3fCwSuD
- Max current and voltage:
- 10A @ 125VAC
- 7A @ 240VAC
- Relay resistance: 100 mΩ max
- 4.8V to 5.2V operating voltage
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
SKU: n/a - Max current and voltage:
