Shop
Showing 745–768 of 1946 resultsSorted by price: high to low
-
IC's
CD4017 Ic Counter IC (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/2XY2dAi
- High speed 16 pin CMOS Decade counter
- Supports 10 decoded outputs
- Wide supply voltage range from 3V to 15V, typically +5V
- TTL compatible
- Maximum Clock Frequency: 5.5Mhz
- Available in 16-pin PDIP, GDIP, PDSO packages
SKU: n/a -
Soldering Tools
Helping Hand for PCB with Multifunctional Magnifier (Magnifying Glass) and Soldering Iron Stand with LED Light
Soldering ToolsHelping Hand for PCB with Multifunctional Magnifier (Magnifying Glass) and Soldering Iron Stand with LED Light
Ask for Latest offer / Availability : https://bit.ly/2SIKjTh
- Color : black + silver
- Lens diameter : 90mm & 34mm / 3.54in & 1.34in
- Power : external power or 3 * AA Battery (not included)
- Power adapter : Input 110-240V 50/60Hz, Output : DC 4.8V 250mA
- Plug standard : EU plug.
- Welding holder size : length 6.3cm/2.48in, Diameter 2.7cm & 1.8cm / 1.06in & 0.71in
- Base size : 10 x 6.8cm / 3.94 x 2.68in (L x W)
- Size : 17.0 x 15.0 x 11.0cm (LxWxH)
SKU: n/a -
Ammeter and Voltmeter
Original Mastech MAS830L Digital Multimeter – Multimeter with Probes
Ask for Latest offer / Availability : https://bit.ly/3qI9MYm
- Brand: Mastech
- DC Voltage utpo 600V (In 5 Ranges)
- AC Voltage utpo 600V (In 2 Ranges)
- DC Current up to 10A (In 5 Ranges)
- Resistance up to 2 M.OHMS (In 5 Ranges)
- Tests AC/DC Voltage, DC Current and Resistance
- Transistor Check, Diode and Continuity Test
- Display Back Light
- Data Hold
- Rubber hostler for good grip.
SKU: n/a -
3D Accessories
2004 LCD Display RepRapDiscount Smart Controller with Adapter
Ask for Latest offers/availability : https://bit.ly/2Y6C4D5
This Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your Sanguinololu board using the “smart adapter” included. After connecting this panel to your Sanguinololu you don’t need your pc any more, the Smart Controller supplies power for your SD card. Furthermore all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
SKU: PGI-0012060 -
Hardware & Tools
XT60 XT90 heat soldering station
Ask for Latest offer / Availability : https://bit.ly/3HFsYiR
- Added slot space for mini T plug.
- Several welding holes for banana plug added for convenient use.
- Thermal-protective coating added to prevent heat from dissipating.
- The slot space for T plug can be prolonged.
- Flexibly adjust the slot space for T plug with screws.
- Support plug type: T Plug/ XT60/ XT90/ min T/ 2-10 mm banana plug (12 kinds of specifications)
SKU: PGI-0029370 -
Motors | Drivers | Actuators Categories
55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability : https://bit.ly/3ioSE8I
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 55mm
SKU: PGI-0046615 -
Temperature and Humidity Sensor
SeeedStudio Grove Flame Sensor
Ask for latest offers/availability : https://bit.ly/2xacyj6
- Operating voltage (DC): 4.75 V to 5.30 V, typical 5 V
- Spectral bandwidth : 760 nm to 1100 nm, typical 940 nm
- Current: 20 mA
- Detection range: 0 – 1 m
- High photo sensitivity
- Fast response time
- Adjustable sensitivity
SKU: PGI-00595599 -
Load / Pressure / Force / Flex Sensor
FlexiForce A301/1 Force Sensor
Ask for latest offers/availability : https://bit.ly/3cRQWa9
- The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.
Applications
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125465 -
-
BLUETOOTH
HC-05 Wireless Bluetooth Module without Base Plate
Ask for latest offers/availability : https://bit.ly/2Wswnum
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: PGI-00617827 -
-
Orange High Torque Motors
Orange OG555 High Torque DC Motor 12V 50RPM 346.8N-cm Encoder Compatible
Ask for Latest offer / Availability : https://bit.ly/37saWmV
- Voltage (DC):12V
- Rated RPM (at 12V):50
- Gear Reduction: 180K
- Rated Torque (N-cm): 346.8
- Full Load Current (A):3.38
- Motor Body Lenth (mm): 94
- Back shaft for Encoder Available
SKU: PGI-00764980 -
Drone Remote/Quad copter Remote
Flysky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
Drone Remote/Quad copter RemoteFlysky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
Ask for Latest offer / Availability : https://bit.ly/2TT6Gpg
- Data Line Cable Access for FS-i6 FS-T6 T6 i6 Transmitter
- Length: 1.5m / 4-29/32 ft
- This wire cannot be used for a simulator.
SKU: PGI-0045734 -
-
Gas Sensor
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector With LCD Display
Ask for latest offers/availability : https://bit.ly/2xZs1mo
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
SKU: PGI-00456157 -
Quad Copter & Multi Rotors
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
Ask for Latest offers/availability : https://bit.ly/3AdNIcz
- Input Voltage Range: 6-28V DC
- Max current sensing: 90A.
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
SKU: PGI-0029397 -
3D Accessories
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
Ask for Latest offers/availability : https://bit.ly/3APytrd
The superior performance of MOSFET (Max 280A).
3. An extra large heat sink, the maximum current can be up to 30A or more.
4. Can use hot-bed output signal of Ramp1.4 and MKS series to control.
5. Can use the digital signal of 5-24v to control.
SKU: PGI-00354349 -
Prayog Blaster
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
Ask for Latest offers/availability : https://bit.ly/3rh9acW
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SKU: PGI-0014950 -
Audio Module
VS1003 VS1003B MP3 Module Decoding Containing Microphones STM32
Ask for latest offers/availability : https://bit.ly/3d1nCyz
- Separate analog, digital, and IO power supply
- Serial data and control interface (SPI)
- 1 headphone and audio output interface
- 1microphone for recording, support audio encoding format
- 1 line input interface; supports MP3 and WAV stream
- Power indicator light.
SKU: n/a -
Relay
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
RelayESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
Ask for latest offers/availability : https://bit.ly/35Klp81
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
-
3D Accessories, 3D Printer Accessories
RepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable
3D Accessories, 3D Printer AccessoriesRepRap MK2B 3D printers Dual Power PCB HeatBed With 14AWG Cable
Ask for Latest offers/availability : https://bit.ly/3m9hGcH
- Dimensions (Outer): 214 x 214 mm.
- Dimensions (Heat Bed): 200 x 200 mm.
- Come with resistor and LEDs soldered, basic soldering skills needed to solder the power wire
- 2 layer, 35μm copper.
- Copper Plated Holes
- Very good in combination with RUMBA or Taurino Power.
- Power Input: 12V / 24V DC
- Weight: 190 gm.
SKU: PGI-0051686
