LOAD / PRESSURE / FORCE / FLEX SENSOR

      Ask for latest offers/availability : https://bit.ly/3aJYOcD

• The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor

      Applications:

1. Testing and Measurement Equipment
2. Embedded Electronics
3. OEM Development Kit
4. Consumer Electronics
5. Multimeter

      Ask for latest offers/availability : https://bit.ly/2yLIH0K 

• A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).

      Ask for latest offers/availability : https://bit.ly/358j32e

1. Testing and Measurement Equipment
2. Embedded Electronics
3. OEM Development Kit
4. Consumer Electronics
5. Multimeter

      Ask for latest offers/availability : https://bit.ly/358hrWe

1. Output Sensitivity: 1.0 ± 0.1 mV / V.
2. Two selectable differential input channels.
3. On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
4. On-chip oscillator requiring no external component with optional external crystal.
5. On-chip power-on-reset.
6. Measurement Resolution: 24 bit.

      Ask for latest offers/availability : https://bit.ly/3eVkBBh

1. Supply voltage range from 4.75VDC to 5.25VDC.
2. Temperature compensated over -40°C to 125°C.
3. Pressure range from 0KPa to 10KPa.
4. The sensitivity of 450mV/kPa.

      Ask for latest offers/availability : https://bit.ly/2W8PU38

1. Weighing Range: 0 ~ 1 kg.
2. Rated Output: 1.0 ± 0.1mV / V.
3. Non Linear Output: ± 0.03% F.S.
4. Input Impedance: 1066 ± 10% Ω.
5. Output Impedance: 1000 ± 10% Ω.
6. Insulation Resistance: 2000 MΩ.

      Ask for latest offers/availability : https://bit.ly/2S9ojgH

• This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.

      Ask for latest offers/availability : https://bit.ly/3aJEiIZ

1. Rated Load: 20Kg
2. Rated Output: 1.0 ±0.15mV/V
3. Zero Output: ±0.1mV/V
4. Cree: 0.03%F.S./30min
5. Input End: Red+, Black-
6. Output End: Green+, White-
7. Input Impedance: 1115±10% Ω