Light/Color Sensor
Showing all 14 results
-
Light/Color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Ask for latest offers/availability : https://bit.ly/34WZObP
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: n/a -
-
Light/Color Sensor
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino
Ask for latest offers/availability : https://bit.ly/3cwoyue
- Operational Voltage: 3.3V.
- Ambient Light & RGB Color Sensing.
- Proximity Sensing.
- Gesture Detection.
- Operating Range: 4-8in (10-20cm).
- I2C Interface (I2C Address: 0x39).
SKU: n/a -
Light/Color Sensor
CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
Ask for latest offers/availability : https://bit.ly/2zftYeC
- Working voltage:2.8-3.8V
- ALS, IR LED and Proximity Detector in an Optical Module;
- Ambient Light Sensing (ALS);
- Approximates Human Eye Response;
- Programmable Interrupt Function with Upper and Lower Threshold;
- Up to 16-Bit Resolution;
- High Sensitivity Operates Behind Darkened Glass;
- Low Lux Performance at 0.01 lux;
SKU: n/a -
Light/Color Sensor
CJMCU-34725 TCS34725 Color Sensor RGB Module
Ask for latest offers/availability : https://bit.ly/2xHe909
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: n/a -
Light/Color Sensor
CJMCU-TEMT6000 An Ambient Light Sensor
Ask for latest offers/availability : https://bit.ly/3auRj8Y
- AEC-Q101 qualified
- High photosensitivity
- Near-Human Eye Spectral Response
- Scalable Output Voltage
- Adapted to human eye responsivity
- Lead (Pb)-free reflow soldering
- Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
SKU: n/a -
Light/Color Sensor
Digital LDR Module
Ask for latest offers/availability : https://bit.ly/2VOteVv
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
SKU: n/a -
Light/Color Sensor
GYML8511 Analog Output Ultra-Violet Light Sensor Module
Ask for latest offers/availability : https://bit.ly/2zhnUCo
- Operating voltage (VCC): 3 V to 5V
- Operating current: 120μA (typical) 190μA (max)
- Operating Temperature: -40°C ~ +85°C
- Photodiode sensitive to UV-A and UV-B
- Embedded operational amplifier
- Analog voltage output
- Low supply current (300uA type) and low standby current (0.1uA type)
SKU: n/a -
Light/Color Sensor
LM393 Photosensitive Light-Dependent Control Sensor Module
Ask for latest offers/availability : https://bit.ly/2KqtQeF
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
SKU: n/a -
-
Light/Color Sensor
TCS3200 Color Recognition Sensor Module for MCU Arduino
Ask for latest offers/availability : https://bit.ly/3auJqkf
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
SKU: n/a
