Shop
Showing 1441–1464 of 1946 resultsSorted by price: high to low
-
Electronic Components & IC's
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
SKU: n/a -
Relay
5V Dual Channel Relay Module
Ask for latest offers/availability : https://bit.ly/3clwbEb
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: PGI-0031557 -
-
Relay
DC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second Signal Triggering Switch Module
RelayDC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second Signal Triggering Switch Module
Ask for latest offers/availability : https://bit.ly/35SoliP
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
SKU: PGI-00118315 -
-
Break out Boards
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Break out Boards1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC DC Boost Converter Module Step Up Board
Ask for latest offers/availability : https://bit.ly/2yxxvFq
- Input voltage 0.8-3.3V output voltage 3.3V
- Maximum output current: 500 mA
- Starting voltage 0.8V, output current 10mA
- Input more than 3 v, and have spent 5V output of 400-400 mA
- Operating frequency: 150KHZ
- Typical conversion efficiency: 85%
SKU: PGI-00406344 -
Break out Boards
ESP-01 Adapter 3.3V 5V Board
Ask for latest offers/availability : https://bit.ly/2SReBQB
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: PGI=0062434 -
IR and RF Transmitter and Receivers
433Mhz RSI Wireless Transmitter Receiver Module
Ask for latest offers/availability : https://bit.ly/35rIjAQ
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
SKU: n/a -
AI Thinker Esp Wifi Modules
Ai Thinker NF-01-N Wireless Transceiver Module
Ask for latest offers/availability : https://bit.ly/35dObgR
- DIP-8 ultra-small package
- built-in 2.4G antenna, compact size, easy to use
- Supports 2Mbps/1Mbps/250Kbps data rate
- Supports six channels of data reception
- modulation methods: GFSK/FSK
SKU: PGI-00648408 -
-
Current and Voltage Sensor
20A Range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2YdgLOb
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: PGI-0023911 -
Current and Voltage Sensor
5A range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2Y0Odal
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SKU: PGI-0023910 -
Current and Voltage Sensor
5A range of single-phase AC current sensor module
Ask for latest offers/availability : https://bit.ly/2VTjwRL
- Onboard precision microcurrent transformer.
- Onboard sampling resistor.
- The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
SKU: PGI-0028369 -
Generic Ultrasonic Sensor
EasyMech Cartoon Bracket with HC-SR04 Ultrasonic sensor
Ask for latest offers/availability : https://bit.ly/2VRfs4z
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 4500 cm
- Frequency: 40 kHz
- Thickness: 2.8-3.1 mm
- The diameter of mounting hole: 3.0mm
- Mounting Bracket Material: Plastic
SKU: PGI-00720739 -
Real Time Module (RTC)
Real Time Clock DS1307 RTC I2C Module AT24C32 + Battery
Ask for latest offers/availability : https://bit.ly/3gmvqx9
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
SKU: PGI-00 44162 -
Robotics Chassis
Advance Metal Chassis 1
Ask for Latest offer / Availability : https://bit.ly/3aVPRQP
- Dimensions: 115mm x 105mm x 45mm
- Weight: 200 gm
- Material: Metal sheet
- Color: Red.
- Sheet Thickness: 1.5 mm.
- Motor Fitting Hole Diameter: 13.75 mm.
- Many perforated holes have given for easy attachment of development board and sensors.
SKU: PGI-2084 -
Electronic Components & IC's, Mechanical, Prayog Blaster
Noel 25W 230V Sodering Iron Model-GOLD
Ask for Latest offer / Availability : https://bit.ly/3uyIwOB
- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
SKU: PGI-00170854 -
Electronic Components & IC's
XL6009 DC-DC Step-up Module with Adjustable Booster Power Supply Module
- Output mode: OUT + output level is, the OUT – output is negative
- Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
- Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)
SKU: PGI-0012282 -
3D Accessories
CNC shield v3 engraving machine 3D Printer
Ask for Latest offers/availability : https://bit.ly/3kJmJRJ
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use. UNO for Arduino module IO port correspondence introduction.
SKU: PGI-0012202 -
Solar Panel
World’s Smallest Solar Powered Car
Ask for latest offers/availability : https://bit.ly/3cUO6lb
- No Battery Required.
- Powered by Solar energy and the Car can run.
- Ultra small solar powered moving car
- Great toy and education tool for children.
- Dimensions: 32 x 22 x 14 (LxWxH) mm.
- Weight: 5 gm.
- Very small in Size
SKU: n/a -
Arduino Display, Prayog Blaster
MAX7219 Dot Led Matrix Module MCU Control LED Display Module
Ask for Latest offer / Availability : https://bit.ly/3hI1XPH
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
SKU: PGI-0022276
