Shop
Showing 1393–1416 of 1946 resultsSorted by price: high to low
-
Current and Voltage Sensor
Current and Voltage Detection Module Arduino Compatible
Ask for latest offers/availability : https://bit.ly/3cKcRjw
- Test Voltage range: DC3 – 25V (for Arduino work on 5V) or DC3 – 16.5V (for Arduino work on 3.3V)
- Test Current range: DC0 – 3A PCB
- Size (LxWxH)mm : 22 x 21 x 7
SKU: PGI-00396910 -
IR And PIR Sensor
3 Channel Path Tracing Module
Ask for latest offers/availability : https://bit.ly/2XTycmC
- Working voltage: 5V
- Uses infrared light detection, anti-jamming capability, using CTRT5000 sensor, adjustable sensitivity, stable performance
- With lights, a fixed bolt hole for easy installation
SKU: PGI-00699505 -
-
Real Time Module (RTC)
SeeedStudio Grove RTC
Ask for latest offers/availability : https://bit.ly/2TuxE3m
- Vcc: 3.3 V to 5.5 V
- Battery voltage: 2.0V to 3.5 V
- ROHS: YES
- I2C serial interface
- Programmable square-wave output signal
- 56-byte, battery-backed, NV RAM for data storage
- Automatic power-fail detect and switch circuitry
- Counting of time intervals valid up to 2100
- Consumes less than 500nA in battery-backup mode
SKU: n/a -
Relay
5V 2 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/36dK6Kf
- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
SKU: n/a -
Break out Boards
SeeedStudio Grove Thumb Joystick
Ask for latest offers/availability : https://bit.ly/2zpufM2
- Analog output
- Output analog value (X co-ordinate): 206-798, typical 516
- Output analog value (Y co-ordinate): 203-797, typical 507
- Grove compatible with 4 pin universe 2.0mm connector
SKU: PGI-00599406 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
DC Motor – 10RPM – 12Volts
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog BlasterDC Motor – 10RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/3bHlj49
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: PGI-005643 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor
12 Volts DC Motor – 500 RPM
Ask for Latest offer / Availability : https://bit.ly/3cI8aJK
- Operating Voltage(V): 12
- Rated Speed (RPM): 500
- Rated Torque(kg-cm): 0.7
- Stall Torque(kg-cm): 3
- No Load Current (A): 0.06
- Load Current (A): 0.3
SKU: PGI-00166 -
-
Microcontrollers
PIC16F88 Microcontroller
- Special Microcontroller Features
- 100,000 erase/write cycles Enhanced Flash program memory typical
- 1,000,000 typical erase/write cycles EEPROM data memory typical
- Low-Voltage Programming
- In-circuit Debugging via two pins
- Programmable period from 1 ms to 268s
- Wide operating voltage range: 2.0V to 5.5V
- Low Features
- Primary Run: RC Oscillator, 76 µA, 1 MHz, 2V
- RC_RUn: 7 µA, 31.25 kHz, 2V
- TImer1 Oscillator: 1.8 µA, 32kHz, 2V
- Watchdog Timer: 2.2 µA, 2V
SKU: n/a -
Maxbotix Ultrasonic Sonar
MB7950 Mounting Hardware for Maxbotix Sonar Sensor
Ask for latest offers/availability : https://bit.ly/2yuWSHw
- 4-20HR‑MaxSonar‑WR
- 4-20SC‑MaxSonar‑WR
- HRXL‑MaxSonar‑WR
- HRXL‑MaxSonar‑WRS
- SCXL‑MaxSonar‑WR
- SCXL‑MaxSonar‑WRS
- I2CXL‑MaxSonar‑WR
- XL‑MaxSonar‑WR
- XL‑TrashSonar‑WR
SKU: PGI-007486 -
Dc Motors &Drivers, Mounting Brackets
EasyMech Bracket for Orange PG28M395 Series Planetory DC Geared Motor (Bend)
Dc Motors &Drivers, Mounting BracketsEasyMech Bracket for Orange PG28M395 Series Planetory DC Geared Motor (Bend)
- Material: Mild Steel(MS).
- Size : 40 x 39 x 40 mm(L x W x H).
- Thickness: 2mm
- Mounting Holes Size: 3.2 mm
- Base holes for Motor Shaft: 17.2 mm.
- Motor fitting holes size: 4.2 mm.
- Weight: 62 gm.
SKU: n/a -
Microcontrollers
PIC16F88 Microcontroller
- Special Microcontroller Features
- 100,000 erase/write cycles Enhanced Flash program memory typical
- 1,000,000 typical erase/write cycles EEPROM data memory typical
- Low-Voltage Programming
- In-circuit Debugging via two pins
- Programmable period from 1 ms to 268s
- Wide operating voltage range: 2.0V to 5.5V
SKU: n/a -
-
IR And PIR Sensor
Cytron Maker Reflect: Simplifying IR Reflectance Sensor for Beginner
Ask for latest offers/availability : https://bit.ly/2KoDI8T
- Operating Voltage: 3.3V and 5V Compatible
- Sensing Distance (Height): 1mm to 40mm (Vcc = 5V, Blackline on a white surface)
- Features a tiny reflectance sensor
- This sensor is used in line following robot
- Fits easily in the tightest space
SKU: PGI-00718385 -
Battery Protection Board
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module
Ask for Latest offer / Availability : https://bit.ly/3yxoNA8
- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A
SKU: PGI-0043921 -
Arduino Modules
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: n/a





















