Shop
Showing 1465–1488 of 1946 resultsSorted by price: high to low
-
Prayog Blaster, Tyres & Wheels
Pure rubber robot wheel Best for Robo Fighting – 6mm shaft
Ask for Latest offers/availability : https://bit.ly/3ctKBn3
- Easy to assemble and disassemble.
- Easy to improve the design with more flexibility.
- The design is Durable.
- Wide space to mount many robotic components.
- Lightweight Design.
SKU: PGI-0077 -
Chargers, Prayog Blaster
12 Volt 2 Amp Power Adapter Charger AC INPUT 90-270 V
Ask for Latest offer / Availability : https://bit.ly/2Mro5SB
- Stabilized Output, low ripple & low interference
- Single Output Voltage
- Short Circuit & Overload protection
- High Efficiency & low energy consumption
- Power LED Monitor
- Ideal for Routers / Modems / Mobile Phones / mp3 players / POS Machines etc.
SKU: PGI-007 -
3D Accessories
Export Quality L293D Arduino Motor Control Shield
Ask for Latest offers/availability : https://bit.ly/3oswLsL
The Device is a monolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors.
SKU: PGI087 -
Power Supply
5V 2A DC Power Supply Adapter
Ask for Latest offer / Availability : https://bit.ly/3zIZRqD
- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 2A
- Load regulation (%): ±5.
- Input Plug: 2-Pin EU type.
- Output Plug: 2 in 1 dual DC Jack (5.5mm + 4mm).
SKU: PGI-00175 -
Electronic Switches/Keypad
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
Ask for latest offers/availability : https://bit.ly/2LHBUZa
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
SKU: n/a -
Relay
1 Road/Channel Relay Module (with light coupling) 12V
Ask for latest offers/availability : https://bit.ly/3e1595i
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: PGI-0031186 -
Break out Boards
W25Q64 Storage 64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
Ask for latest offers/availability : https://bit.ly/3chAMat
- IC: W25Q64FV
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
SKU: PGI-00411810 - IC: W25Q64FV
-
Gas Sensor
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
Ask for latest offers/availability : https://bit.ly/2W0BeCS
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
SKU: PGI-0043970 -
Current and Voltage Sensor
30A range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2xLm9NF
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
SKU: PGI-0012264 -
Motors | Drivers | Actuators Categories, Prayog Blaster
A4988 driver Stepper Motor Driver- Good Quality
Motors | Drivers | Actuators Categories, Prayog BlasterA4988 driver Stepper Motor Driver- Good Quality
Ask for Latest offers/availability : https://bit.ly/3qv7v2n
- Low RDS (On) Output
- Automatic current decay mode detection / selection Mix with slow current decay modes
- Synchronous rectification for low power dissipation
- Internal UVLO, · Cross-current protection · 3.3 and 5 V compatible logic supply · Thermal shutdown circuitry · Ground fault protection · Load short-circuit protection
SKU: PGI-0060 -
Motors | Drivers | Actuators Categories, Prayog Blaster
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
Motors | Drivers | Actuators Categories, Prayog Blaster28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
Ask for Latest offers/availability : https://bit.ly/3cgN0kG
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: PGI-0017304 -
-
Temperature and Humidity Sensor
LM35D Analog Temperature Sensor Module + Cable
Ask for latest offers/availability : https://bit.ly/3eOFcXW
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
SKU: PGI-00130267 -
Gas Sensor
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
Ask for latest offers/availability : https://bit.ly/355siAp
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: PGI-0043971 -
3D Accessories
DRV8825 stepper motor driver Module arduino 3D printer RAMPS1.4 RepRap StepStick
Ask for Latest offers/availability : https://bit.ly/3CLAup5
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- layer, 2 oz copper PCB for improved heat dissipation.
SKU: PGI-006721 -
Arduino Sensors, Prayog Blaster
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Ask for Latest offer / Availability : https://bit.ly/3llU5o7
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: PGI-0044007 -
Sensors
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
Ask for latest offers/availability : https://bit.ly/30XuNDN
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: PGI-009141 -
Connector
Alligator Clips Electrical DIY Test Leads 10pcs of Double-ended Crocodile Clips Roach Clip
Ask for Latest offer / Availability : https://bit.ly/3gLUeRh
- Colour: Red, Green, Yellow, White, and Black, etc.
- Cable length: 45 cm.
- Net weight: 82 gm.
- They are very useful for connecting components to wires.
- It is insulation covered clips connected to the wire from both ends.
SKU: PGI-0028356 -
Electronic Switches/Keypad
5D Rocker Joystick for Arduino, MCU, AVR Game
Ask for latest offers/availability : https://bit.ly/2A15lmx
- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
SKU: n/a -
Light/Color Sensor
CJMCU-TEMT6000 An Ambient Light Sensor
Ask for latest offers/availability : https://bit.ly/3auRj8Y
- AEC-Q101 qualified
- High photosensitivity
- Near-Human Eye Spectral Response
- Scalable Output Voltage
- Adapted to human eye responsivity
- Lead (Pb)-free reflow soldering
- Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
SKU: PGI-00130228 -
Arduino Accessories, Electronic Components & IC's, Motors | Drivers | Actuators Categories
Mini Vibration Vibrating Electric Toys Motor DC 1.5-6V 14000RPM for Arduino
Arduino Accessories, Electronic Components & IC's, Motors | Drivers | Actuators CategoriesMini Vibration Vibrating Electric Toys Motor DC 1.5-6V 14000RPM for Arduino
Ask for Latest offer / Availability : https://bit.ly/3iP6Bwj
- Motor Size: 15x11x19mm; Vibrator Size: 7 x 5mm (mounted eccentrically on the shaft)
- Voltage: 1.5 – 6v; Speed: 14000 RPM
- Typical Application: RC toys,Game Controller, Vibrating toothbrush, Electrical Toys, Game Machine, Game Handle, Game Controller, Electric Appliances, Massager Device.
SKU: n/a -
IC's
16 Pin DIP IC Socket-Base-Connector suited for Microcontrollers
Ask for Latest offer / Availability : https://bit.ly/36BRjEI
- 16-Pins.
- JDEC standard Compliant.
- Moulded notch for proper orientation.
- Easy to insert and remove ICS.
- Multiple DIY projects.
- Application requiring replaceable ICS.
SKU: n/a -
Switch
Robotics Switch Box Enclosure With DPDT Switches
Ask for Latest offer / Availability : https://bit.ly/3hkO3Ul
- Good Impact Resistance.
- Good Stiffness.
- Switched will directly snap fit into slots.
- Switches are ROCKER TYPE ( They will retain central Position once force is removed from them.
- Flush mounting DPDT rocker switch
- For Linear Actuators and other DC Motors
- 3 position switch
SKU: PGI-007989
