Shop
Showing 865–888 of 1946 results
-
Load / Pressure / Force / Flex Sensor
FlexiForce A502 Ultra Thin Force Sensor
Ask for latest offers/availability : https://bit.ly/2yLIH0K
- A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).
SKU: PGI-00125463 -
Flight Controller & Accessories
Flip32 OMNIBUS F4 Flight Controller
Ask for Latest offer / Availability : https://bit.ly/3cPi77Z
- 128Mb Flash(16M Byte)
- SBUS/PPM input (Pinheaders)
- DSM/DSM2/DSMX input(Plug)
- 6PWM output (Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- All through hole pin header Design -no Sh connectors
- STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
- Works Perfect with Raceflight or BetaFlight 3.0
SKU: PGI-00127316 -
Drone Remote/Quad copter Remote, Robots and Kits
Flysky CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver
Drone Remote/Quad copter Remote, Robots and KitsFlysky CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver
Ask for Latest offers/availability : https://bit.ly/3ei0vDk
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).
SKU: PGI-005777 -
Drone Remote/Quad copter Remote
Flysky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
Drone Remote/Quad copter RemoteFlysky Data Line Cable Access Wiring Connector for T6 i6, FS-i6, FS-T6 Transmitter
Ask for Latest offer / Availability : https://bit.ly/2TT6Gpg
- Data Line Cable Access for FS-i6 FS-T6 T6 i6 Transmitter
- Length: 1.5m / 4-29/32 ft
- This wire cannot be used for a simulator.
SKU: PGI-0045734 -
Drone Remote/Quad copter Remote
Flysky FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
Ask for Latest offer / Availability : https://bit.ly/2VfTWpB
- Input Power : 4.0 – 8.4 VDC (2A).
- Transmitting Power: ≤ 20 dBm.
- Model Type : Airplane / Glider / Helicopter
- Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G
- 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system.
SKU: PGI-0033422 -
Drone Remote/Quad copter Remote
Flysky FS-i4X 2.4GHz 4CH AFHDS R/C Transmitter + FS-A6 Receiver
Ask for Latest offers/availability : https://bit.ly/3uTRPsR
- Use: Vehicles & Remote Control
- Remote Control Peripherals/Devices: Remote Controller
- RC Parts & Accs: Transmitters
- Model Number: FS-I4X
- Material: Plastic
SKU: PGI-0079738 -
Drone Remote/Quad copter Remote
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
Ask For Availability : https://bit.ly/32B85Ba
- i-Bus Interface: Yes.
- Data Acquisition Interface: Yes.
- Weight:392 gm.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
SKU: PGI-0047628 -
Drone Remote/Quad copter Remote
Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
Drone Remote/Quad copter RemoteFlysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
Ask for Latest offers/availability :
- Item Name: 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Power Consumption: 55mA@ 5v
- Format: NTSC/PAL(Free switch)
- Lens: 2.8mm IR coated FOV: 110 °
- With lens cover, well protecting the lens
- With WRD function in the default
SKU: PGI-0033428 -
Drone Remote/Quad copter Remote, Quad Copter & Multi Rotors
Flysky FS-T6 6CH Transmitter with FS-R6B Receiver
Drone Remote/Quad copter Remote, Quad Copter & Multi RotorsFlysky FS-T6 6CH Transmitter with FS-R6B Receiver
Ask for Latest offers/availability : https://bit.ly/3kNKcj1
- The newest 6 channel 2.4GHz system with lots of cool and convenient features making the operation of this transmitter simple and instinctive.
- The FlySky FS-T6 is the perfect transmitter for sports modellers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use.
- It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and aeroplanes.
- It has the ability to store 20 models allowing the user to save a whole fleet of aircraft.
SKU: PGI-00234445 -
-
Load / Pressure / Force / Flex Sensor
Force Sensor Resistor Square 38.1mm – Pressure Sensor
Ask for latest offers/availability : https://bit.ly/3aMg4h3
- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate.
SKU: PGI-0012244 -
-
Break out Boards
Frequency Adjustable Pulse Generator Module NE555
Ask for latest offers/availability : https://bit.ly/2SNiV3g
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 3 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
SKU: PGI-0031287 -
Drone Remote/Quad copter Remote
FS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder
Drone Remote/Quad copter RemoteFS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder
Ask for Latest offers/availability : https://bit.ly/3leoypI
- Full touchscreen interface
- Capable of sending and receiving data
- Multi-channel Hopping Frequency
- Omni-directional Gain Antenna
- Unique ID Recognition System
- Low Power Consumption
SKU: PGI-0080046 -
Drone Remote/Quad copter Remote
FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
Drone Remote/Quad copter RemoteFS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
Ask for Latest offer / Availability : https://bit.ly/3qa7OQP
- Brand Name: FLYSKY
- NO.: FS-SM600
- Default Mode: 2
- Model type: Heli/Glid/Airplane
- Works with Windows 10,8,7, Vista and XP, 32 and 64 bit
- Simulators: Reflex XTR, G3~G4.5, APD, PhoenixRC
SKU: PGI-0079979 -
Drone Remote/Quad copter Remote
FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-IA10B Receiver
Ask for Latest offer / Availability : https://bit.ly/3bd3KJi
- Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
- Receiver: FS-IA10B
- Default Mode: Mode-2
- Input Power: 12V DC (1.5V x 8 AAA Battery)
- Bidirectional System
- Frequencies-Hopping
- Omni-directional High Gain Antenna
- Low Power Consupmtion
SKU: PGI-006471 -
-
Battery and Charger, Chargers
FTRC FT20A Pro AC Adapter DC 14V 220W Output for RC IMAX B6 Balance Charger
Battery and Charger, ChargersFTRC FT20A Pro AC Adapter DC 14V 220W Output for RC IMAX B6 Balance Charger
Ask for Latest offers/availability : https://bit.ly/3Ap76UP
- Input AC supply (V): 100-240V 50/60Hz.
- Output DC supply (V): 14V.
- Rated Power (W): 150.
- Max Power (W): 220.
- Max output current (A): 15.
- AC connecting cable length (m): 1.1.
SKU: PGO-0015251 -
3D Accessories
Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG996+Servo Horn
Ask for Latest offer / Availability : https://bit.ly/2F0lY4s
- For hobbyists, robot competitions, kids etc.
- Size:40cm(H) x 23cm(W)
- Containing the 17DOF:
- 1DOF of the head
- 4DOF of the arm
- 2DOF of the shoulder
- 2DOF of the hip
- 6DOF of the legs
- 2DOF of the feet
SKU: PGI-0031119 -
Arduino Shield
G15 Driver for G15 Cube Servo
Ask for Latest offer / Availability : https://bit.ly/2M3VSkH
-
Maximum Continuous Current: 8A
-
2 x G15 Cube Servo ports (can be daisy chained to more servos)
-
External power terminal for Cube Servo.
-
2 LEDs as logic power and servo power indicators.
-
3.3V and 5V signals compatible.
SKU: PGI-0026016 -
-
Circuit Board
General Purpose Printed Circuit Board FR2 A Grade Material (140 x 90 mm)
- General Purpose PCB directly from the Manufacturer | AnandCircuits
- Material : FR2 PREMIUM QUALITY Copper Clad Phenolic | Holes provided : Yes
- Size: 140mm x 90mm | Copper Layer : Lacquered (to prevent corrosion)
- Package Content : 3 x Universal PCB Boards (General Purpose)
SKU: n/a -
Circuit Board
General Purpose Printed Circuit Board-Strip-board (80 x 55 mm)
- General Purpose PCB directly from the Manufacturer | AnandCircuits
- Material : FR2 Copper Clad Phenolic | Holes provided : Yes
- Size: 140mm x 90mm | Copper Layer : Lacquered (to prevent corrosion)
- Package Content : 3 x Universal PCB Boards (General Purpose)
- See Description below for more details.
SKU: n/a -
Wireless Smart Switch
Generic 12V One Channel RF Wireless Relay Module with Remote Control
Ask for latest offers/availability : https://bit.ly/3c2ppTr
- DC 12V Home lighting system
- Remote control switch
- Smart Home / Home Automation
- Garage Door
- Remote controlled gates
- Security Monitoring
- LED lighting
- Fluorescent lamp
SKU: n/a
