Shop
Showing 817–840 of 1946 results
-
Relay
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
RelayESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
Ask for latest offers/availability : https://bit.ly/35Klp81
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
Microcontrollers
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
Esp Wifi Module
ESPresso Lite V2.0 ESP8266, Espressif, IoT, wifi
Ask for latest offers/availability : https://bit.ly/2yf1Ec7
-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
SKU: n/a -
-
IoT Kits
ESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
- Ready pads for I2C OLED panel
SKU: n/a -
-
3D Accessories, Filaments
eSun 1.75mm 3D Printing Filament 0.5kg-Bronze
Ask for Latest offer / Availability : https://bit.ly/3b45W7g
- Stable diameter (smooth prints)
- Suitable for any flexible compatible FDM printer
- No smell when printing, environment-friendly and recyclable.
- Low material shrinkage rate, less part warping and curling.
- Outstanding toughness.
- Low processing temperature, good liquidity and processed easily.
SKU: PGI-00324175 -
Filaments
eSun 1.75mm eASA 3D Printing Filament 0.5kg-Black
Ask for Latest offer / Availability : https://bit.ly/2LeltX8
- Excellent mechanical physical property
- Stable Melting Point
- Good Round Shape
- Weather resistant, high temperature resistant and excellent UV resistant
- Anti-static material.
SKU: PGI-00325028 -
Filaments
eSun 1.75mm eCopper 3D Printing Filament 0.5kg
Ask for Latest offer / Availability : https://bit.ly/3pTXcVJ
- Environmentally friendly and odourless when printing.
- Less Shrinkage, printing products without the warped edge.
- Lower moulding temperature, better mobility, and easy processing.
- Print moulded product’s surface showed metal texture after polished.
SKU: PGI-00325239 -
3D Accessories, Filaments
eSun 1.75mm Nozzle Cleaning Filament 100g-White
Ask for Latest offers/availability : https://bit.ly/3oaPfhd
- Excellent heat stability, Wide cleaning temperature range cleaning rods extrude normally at the temperature range of 150℃-260℃ when testing.
- With slight viscosity and enable it to take residual material out of the nozzle and no jamming in the nozzle
- Not easy to degradation in the heat.
- Using cleaning rods can prevent nozzle plugging during the transition between high and low-temperature material
SKU: PGI-00324799 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Black
Ask for Latest offers/availability : https://bit.ly/3lZfcxy
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00323102 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Blue
Ask for Latest offers/availability : https://bit.ly/3ALekmh
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00323117 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Green
Ask for Latest offers/availability : https://bit.ly/3kKu9E9
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00323143 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Grey
Ask for Latest offers/availability : https://bit.ly/2XVlyGf
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00323164 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Natural
Ask for Latest offers/availability : https://bit.ly/2XTjFJK
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00322218 -
3D Accessories, Filaments
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Orange
Ask for Latest offers/availability : https://bit.ly/39FPoAF
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: PGI-00323151 -
Filaments
eSun eABS Max 1.75mm 3D Printing Filament 1Kg – Black
Ask for Latest offers/availability : https://bit.ly/3ET3M6V
- The appearance is black, nontransparent.
- Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant.
- Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
- Allow acetone polishing for appearance
SKU: PGI-00578865 -
Filaments
eSUN ePA Nylon 3D Printer filament 1.75mm 1Kg-Natural
Ask for Latest offer / Availability : https://bit.ly/2UfnpQz
- Environmentally friendly, Nylon Material.
- Printing smoothly, odourless, matte finish.
- High Strength, High Rigidity, Good Toughness, Wear-Resisting, Fitting to 3D print industrial parts.
- Compared with Nylon, it has lower shrink rate and distortion, high accuracy without a warped edge.
- Good flame resistance, Flame-retardant level: UL94-V2
SKU: PGI-00328221 -
Filaments
eSUN ePA-CF 3D Printer filament 1.75mm 1Kg-Natural
Ask for Latest offer / Availability : https://bit.ly/2InTbII
- Environmentally friendly, Nylon based, 20% carbon fibre.
- Printing smoothly, odourless, matte finish.
- High Strength, High Rigidity, Good Toughness, Wear-Resisting, Fitting to 3D print industrial parts.
- Compared with Nylon, it has lower shrink rate and distortion, high accuracy without a warped edge.
- Good flame resistance, Flame-retardant level: UL94-V2.
SKU: PGI-00327513 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Black
Ask for Latest offers/availability : https://bit.ly/3m4RAr8
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00315610 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Blue
Ask for Latest offers/availability : https://bit.ly/3ujuyjZ
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316748 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Brown
Ask for Latest offers/availability : https://bit.ly/3ugQvQJ
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316800 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Gold
Ask for Latest offers/availability : https://bit.ly/3CGKU9s
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316789 -
3D Accessories
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
Ask for Latest offers/availability : https://bit.ly/3zKz38g
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316762 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Grey
Ask for Latest offers/availability : https://bit.ly/2Y59e6f
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316778 -
3D Accessories
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
Ask for Latest offers/availability : https://bit.ly/2XUZM4I
- onsistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316766
