Shop
Showing 385–408 of 1946 resultsSorted by price: high to low
-
-
3D Accessories
MGN12H Linear Guide Rail – 0.5M with Sliding block
Ask for Latest offer / Availability : https://bit.ly/3hUBwHI
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
SKU: PGI-00503365 -
Motors | Drivers | Actuators Categories
Orange Planetary Gear DC Motor 12V 1350RPM 1.98Kg-CM PGM45775-3.7K
Motors | Drivers | Actuators CategoriesOrange Planetary Gear DC Motor 12V 1350RPM 1.98Kg-CM PGM45775-3.7K
Ask for Latest offer / Availability : https://bit.ly/3iUXj29
- Model: PGM45775-3.7K
- Operating Voltage: 12V DC
- Rated Torque: 1.98 KgCm
- Rated Speed: 1350 RPM
- Rated Current: 3.88 A
- Rated Power: 46.32 W
- Gear Ratio: 3.7 : 1
SKU: n/a -
Educational Science Toys
SNAP CIRCUIT 198 EXPERIMENTS
Ask for Latest offers/availability : https://bit.ly/3iaqRbL
This is just a great learning kit for hundreds of experiments – easy to build! It’s much more than just a toy. The Playtastic electronics kit contains 30 parts with which your children can experiment multiple choices. Start from some simple electronic light and switch project.
SKU: SN198 -
Planetary Gear DC Motor
Orange Planetary Gear DC Motor 12V 370 RPM 147.2 N-cm PGM45775-19.2K
Ask for Latest offer / Availability : https://bit.ly/34OPqTV
- Model: PGM45775-19.2K
- Operating Voltage: 12V DC
- Rated Torque: 147.2 N-cm
- Rated Speed: 370RPM
- Rated Current: 2.6 A
- Rated Power: 61.85 W
- Gear Ratio: 19.2 : 1
SKU: PGI-00812267 -
Electronic Components & IC's
XBee Pro S2C 63mW 802.15.4 Module without Antenna
Ask for Latest offer / Availability : https://bit.ly/2KbdnuA
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
-
Load / Pressure / Force / Flex Sensor
MPX5010DP Pressure Sensor 0-10KPa Transmitter Sensor Module
Ask for latest offers/availability : https://bit.ly/3eVkBBh
- Supply voltage range from 4.75VDC to 5.25VDC.
- Temperature compensated over -40°C to 125°C.
- Pressure range from 0KPa to 10KPa.
- The sensitivity of 450mV/kPa.
SKU: PGI-00456141 -
-
Raspberry Pi Accessories
Plusivo Pi 4 Super Starter Kit without Raspberry Pi
Ask for Latest offer / Availability : https://bit.ly/389LXmn
- All in one Plusivo Pi 4 Super Starter Kit
- A basic beginner kit with all the necessary components to jumpstart your interest in learning and making your own projects
SKU: PGI-00699602 -
Gsm/Gprs
SIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Gsm/GprsSIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Ask for latest offers/availability : https://bit.ly/3fecIHb
- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
SKU: n/a -
-
Motor Driver
Cytron Dual Channel Enhanced 10 Amp DC Motor Driver 30A Peak MDD10A
Ask for Latest offers/availability : https://bit.ly/3z0ppxZ
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: PGI-003405 -
3D Accessories
E3D Hardened Steel V6 Nozzle 1.75mm x 0.40mm
Ask for latest offers/availability : https://bit.ly/2SYx3Xf
E3D wear-resistant 0.40 mm nozzle made of hardened steel for 1.75 mm filament. Compatible with E3D v6 kits and to be used for filament filled with carbon fibre or other abrasive materials.
SKU: PGI-00291064 -
-
Temperature and Humidity Sensor
SeeedStudio Grove Temperature, Humidity, Pressure and Gas Sensor
Ask for latest offers/availability : https://bit.ly/2Y0RWoh
- 4-in-1 multiple measurements: Temperature, Humidity, Pressure, Gas
- Low power consumption
- Wide measurement range
- Easy project operation: Grove compatible interface
- Optional output: Individual humidity, pressure and gas sensors can be independently enabled/disabled
SKU: PGI-00672612 -
Development Board
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Ask for Latest offers/availability : https://bit.ly/39UO6lC
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: PGI-003345 -
Development Board
Grove – Arduino Beginner Kit (All-in-one Arduino Compatible Board)
Ask for Latest offer / Availability : https://bit.ly/2Sqhze4
- Super friendly to beginner
- Suitable for Arduino beginners
- Suitable for STEAM teaching
- Suitable for getting started with open-source hardware and Arduino coding
SKU: PGI-00766894 -
Drone Remote/Quad copter Remote
FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
Drone Remote/Quad copter RemoteFS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
Ask for Latest offer / Availability : https://bit.ly/3qa7OQP
- Brand Name: FLYSKY
- NO.: FS-SM600
- Default Mode: 2
- Model type: Heli/Glid/Airplane
- Works with Windows 10,8,7, Vista and XP, 32 and 64 bit
- Simulators: Reflex XTR, G3~G4.5, APD, PhoenixRC
SKU: PGI-0079979 -
-
Biometric/ECG/EMG/Sensor
R305 Fingerprint Identification Module Fingerprint Lock Optical Development Board
Biometric/ECG/EMG/SensorR305 Fingerprint Identification Module Fingerprint Lock Optical Development Board
Ask for latest offers/availability : https://bit.ly/3cFnIex
- Integrated image collecting and algorithm chip together, ALL-in-One.
- The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing techniques.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Comes with Matching mode (1: 1) and Search mode (1: N)
SKU: PGI-0031272 -
Display
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
DisplayDSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
Ask for Latest offer / Availability : https://bit.ly/3p5QrzX
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Maximum Real-time Sampling Rate: 1Msps
- Accuracy: 12Bit
- Sampling Buffer Depth: 1024 bytes
- Analog Bandwidth: 0-200KHz
SKU: PGI-0028471
