Shop
Showing 193–216 of 1946 resultsSorted by price: high to low
-
-
Sensors
Advanced Auto-Calibrating Line Sensor LSA08
Ask for Latest offer / Availability :- https://bit.ly/2zdBDdC
- 8 sensor pairs spaced 16mm.
- 12V input power
- Onboard Mode and a Select button for instant configuration of LSA08
- LCD display unit showing 8 sensors analog value with bar chart and line position.
- Simple Auto-Calibration function to the line following surface.
- Low current consumption (typically 26mA)
- Works on glossy or reflective surface
- Refresh rate up to 200Hz.
SKU: PGI-006182 -
Environmental Sensors
Wind Speed Sensor Voltage Type(0-5V) Anemometer Kit (Waterproof & Industrial)
Ask for Latest offer / Availability : https://bit.ly/34JYAAH
- High hardness, Corrosion protection.
- Waterproofness and High precision.
- The mode of its output signal：0-5V(Voltage signal).
- supply voltage: DC 9-24V.
- Power consumption：Voltage MAX≤0.3W.
- Start wind speed：0.4-0.8m/s.
SKU: PGI-0028669 -
Maxbotix Ultrasonic Sonar
MaxBotix MB1413 HRUSB-MaxSonar-EZ1
Ask for latest offers/availability : https://bit.ly/3cGG9jh
- Operating voltage (v): 3.0 – 5.5V
- Operating Temperature: -40°C to +65°C
- Operating Frequency: 42kHz
- Resolution: 1mm
- Designed for protected indoor environments
- Low cost ultrasonic range finder
- Less than 1 cubic inch in size with easy mounting
- Long range object detection
- Small and easy to moun
- RoHS compliant
SKU: PGI-00701961 -
Chargers
SkyRC IMAX B6AC V2 Professional Balance Charger/Discharger (Original)
Ask for Latest offer / Availability : https://bit.ly/34okUQe
- PC connectivity
- Microprocessor controlled
- Delta-peak sensitivity
- Individual cell balancing
- Li-ion, LiPo, and LiFe capable
- Ni-Cd and NiMH capable
- Time limit function
- Input voltage monitoring (Protects car batteries at the field)
- Data storage (5 pack memory)
- Battery break in and cycling.
SKU: n/a -
Dc Motors &Drivers
SmartElex 30D Dual Channel 30A Smart DC Motor Driver
Ask for Latest offers/availability : https://bit.ly/30z5CXG
- Supplying 30 amps continuous with peak currents up to 85 amps (2 Sec) per channel.
- Support motor voltage from 7V to 30V.
- Onboard Low Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent protection and indication.
- Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On board push buttons for test and manual operation.
SKU: PGI-0077719 -
Official Raspberry Pi Boards and Hats, Raspberry PI
Raspberry Pi 4 Model B with 2 GB RAM
Ask for Latest offers/availability : https://bit.ly/2XXOrRI
- 2GB/4GB Varients
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C Port
SKU: PGI-00329 -
Motor Driver
Sabertooth Dual 12A Motor Driver for R/C
Ask for Latest offers/availability : https://bit.ly/3jYNlh8
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Dual motor driver
- Ultra-sonic switching frequency
- 1 Amp Switching BEC
SKU: PGI-004695 -
Chargers
HTRC C150 150W 10A LiPo LiFe NiMh Battery Charger/Discharger
Ask for Latest offers/availability : https://bit.ly/3tcUPPx
- Input: AC 100-240V / DC 11-18V
- Charge power: Max 150W
- Discharge power: 10W
- Charge current : 0.1-10A
- Discharge current : 0.1-2A
- Lilon/LiPo/LiFe/LiHV cell count: 1-6cells
- NiCd/NiMH battery cell count: 1-15cells
- PB Battery voltage: 2-20V
- Smart battery: I/II/III
- Current drain for balancing: 500mA/cell
SKU: PGI-00805318 -
Filaments
eSUN ePA-CF 3D Printer filament 1.75mm 1Kg-Natural
Ask for Latest offer / Availability : https://bit.ly/2InTbII
- Environmentally friendly, Nylon based, 20% carbon fibre.
- Printing smoothly, odourless, matte finish.
- High Strength, High Rigidity, Good Toughness, Wear-Resisting, Fitting to 3D print industrial parts.
- Compared with Nylon, it has lower shrink rate and distortion, high accuracy without a warped edge.
- Good flame resistance, Flame-retardant level: UL94-V2.
SKU: PGI-00327513 -
Relay
SeeedStudio Grove 4 Channel Solid State Relay
Ask for latest offers/availability : https://bit.ly/2zpgOvI
- Operating input voltage: 4~6V
- Rated Input Voltage: 5V
- Rated Load Voltage: 100 to 240 VAC 50/60 Hz
- Load Voltage Range: 75 to 264 VAC 50/60 Hz
- Load current: 0.1 to 2 A
- Leakage current: 1.5 mA max. (at 200 VAC)
SKU: n/a -
-
Drone Remote/Quad copter Remote, Quad Copter & Multi Rotors
Flysky FS-T6 6CH Transmitter with FS-R6B Receiver
Drone Remote/Quad copter Remote, Quad Copter & Multi RotorsFlysky FS-T6 6CH Transmitter with FS-R6B Receiver
Ask for Latest offers/availability : https://bit.ly/3kNKcj1
- The newest 6 channel 2.4GHz system with lots of cool and convenient features making the operation of this transmitter simple and instinctive.
- The FlySky FS-T6 is the perfect transmitter for sports modellers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use.
- It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and aeroplanes.
- It has the ability to store 20 models allowing the user to save a whole fleet of aircraft.
SKU: PGI-00234445 -
-
Motor Driver
Sabertooth Dual 5A Motor Driver for R/C
Ask for Latest offer / Availability :https://bit.ly/36sjUxE
- Operating Voltage(VDC): 6-18
- Peak Current (A): 10
- Continuous Current (A): 5
- No. of Channels: 2
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
SKU: PGI-004689 -
Flight Controller & Accessories
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Flight Controller & AccessoriesKK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Ask for Latest offer / Availability : https://bit.ly/3v6MSg6
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU InvenSense Inc.
- INPUT VOLTAGE: 4.8V-6.0V.
- AVR INTERFACE: Standard 6 Pin.
- SIGNAL FROM RECEIVER: 1520us(5 channels).
- SIGNAL TO ESC: 1520us.
SKU: PGI-003106 -
Motor Driver, Prayog Blaster
Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER
Ask for Latest offer / Availability : https://bit.ly/3pTZPX6
-
Single power operation
-
Dual Channels means it can drive two brush motor independently, or mixed.
- Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Power, Error indicator, RUN status (Left and Right) LEDs
-
On board reset button to restart the MCU after changing operation mode.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
SKU: PGI-004565 -
-
Raspberry Pi Displays
7 Inch LCD Touch Display With HDMI Driver Board Kit For Raspberry Pi
Ask for Latest offer / Availability : https://bit.ly/39LEh8R
- The function of plug and play support
- 5V supports DC voltage input, and can also be powered by USB or mobile power supply.
- Truly Interactive – the latest software drivers will support a virtual touchscreen ‘on-screen’ keyboard, so there is no need to plug in a keyboard and mouse.
- Make your own Internet of Things devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
- A range of educational software and programs available on the Raspberry Pi will be touch-enabled, making learning and programming easier on the Raspberry Pi.
SKU: PGI-0076643 -
Educational Science Toys
SNAP CIRCUIT 1366
Ask for Latest offers/availability : https://bit.ly/3zKPVvQ
Great learning kit for 1366 of experiments – easy to build. Much more than just a toy: The Plastic electronics kit contains 66 parts with which your children can experiment multiple choices.
SKU: SN1366 -
Lidar Sensor
TFMini Plus LiDAR Distance Sensor for Drones Robots IoT ITS Smart Detection (12m)
Ask for latest offers/availability : https://bit.ly/2VURo1L
- Low-power-consumption
- Improves the frame rate
- IP65 enclosures
- Optimizes various compensation algorithms.
- Operating Range: 0.1m ~ 12m
SKU: PGI-00170839 -
3D Accessories, 3D Printer Accessories
Component kit for 3D printer – Advance
Ask for Latest offer / Availability : https://bit.ly/3tEN5ZT
- USB type B receptacle.
- SD Card adds on available.
- Fits 5 Pololu stepper driver board.
- LEDs indicate when the heater outputs on.
- Expandable to control other accessories.Heated bed control with an additional 11A fuse.
SKU: PGI-00781355 -
