This DIY Intelligent Bluetooth Turtle Car Kit For Arduino Smart Car Learning is All in one kit for the DIY robot builders. It consists of a microcontroller learning application development system, the Arduino microcontroller series ATmega – 328 p as the kit comes with Arduino Uno board and Its sensor shield board to mount various sensors and modules.
The comes with all essential sensors such as line followers, Ultrasonic sensor for obstacle avoidance, Bluetooth transceiver to control the robot with your phone, an infrared remote control and wireless remote control function, and suite contains a lot of interesting programs, and can expand the external circuit module, thus increasing the use function of the car.
The kit also Includes 18650 Rechargeable batteries with Charger and Battery Holder to power your bot, and all required cables wires wheels and essential fittings mentioned in the package Includes section Below.
Note: This car kit required 2 x 18650 Rechargeable Batteries. which is not included in the kit Box due to different shipping categories. You can buy any 18650 Battery separately. Following are the link to buy these batteries
Orange ICR 18650 2000mAh 20C Lithium-Ion Battery
Orange ICR 18650 2200mAh 22F Lithium-Ion Battery
SAMSUNG INR18650-25R 2500mAh Li-Ion Battery
SAMSUNG ICR18650-26 J 2600mAh Li-Ion Battery
PANASONIC NCR 18650B 3400 mAh Li-Ion Battery
Also, IR Remote control does not come with Battery for the same reason. Following is the link to buy a battery for IR Remote
Panasonic CR2032 3V Lithium Coin Battery
Specifications and Features:
- Voltage range: 1.5V – 12V.
- The motor shaft length: 10 mm. 6.0V 50,100rpm/min.
- Control motor selection L298N drive module, and single-chip microcomputer real isolation.
- Three groups of line module, detection of the black and white line, higher precision, and fall prevention control is also available.
- Infrared remote communication module, the remote control system of the smart car.
- Bluetooth wireless module, can and mobile phone Bluetooth pairing remote-controlled robot.
1 x 18650 2xBattery box with 2.5 DC Plug
1 x 18650 2xBattery Charger
1 x L298N Motor Driver Board
1 x HC-SR-04 Ultrasonic Module
1 x HC-01 Bluetooth Transceiver Module
1 x Infrared Remote Receiving Sensor
1 x Single-chip IR Remote Control
1 x USB to USB Type B Arduino Cable
1 x Tower Pro SG 90 Servo Motor with Accessories
1 x Pan Tilt Camera/Sensor bracket Assembly for SG90 Servo
1 x ARDUINO UNO328 Development Board
1 x Arduino Sensor Expansion board (Sensor Shield 5.0)With Bluetooth socket
1 x 40 Wire Female to Female Dupont Line
1 x 3 mm screw nut Set
1 x Wire Set (20cm x 8 wires Red and Black)
2 x Tire (Black & White)
2 x Caster/Bull ‘s-eye Universal Wheel
2 x Micro Metal Gear Motor
2 x Micro Gear Motor Bracket/Holder
2 x The Robot Chassis Assembly
3 x Line Sensor Module
4 x The Pillars of 40 mm
9 x The Pillars of 10 mm