Shop
Showing 697–720 of 1946 results
-
Dobot
DOBOT Robot Vision Kit
Ask for Latest offer / Availability : https://bit.ly/3jmGLy9
DOBOT Robot Vision Kit provides a basic software and hardware platform based on visual development. With the advantages of rich functions, stable performance, and convenient operation, it perfectly meets the needs of visual applications including visual positioning, measurement, detection, and recognition.
SKU: PGI-811286 -
Dobot
DOBOT Sliding Rail kit for Robot
Ask for Latest offer / Availability : https://bit.ly/34ok3PI
- Dimension(L × W × H)： 1320mm × 120mm ×55mm
- Max speed: 150mm/s
- Effective Travel Distance: 1000 mm
- Suitable Age: Above 14
- Best accessories for DOBOT Magician and DOBOT M1 to break the space limitation.
SKU: PGI-811285 -
Wireless and IOT
DOIT Mini Ultra-Small size ESP-M3 Serial Wireless WiFi Transmission Module Fully Compatible with ESP8266
Wireless and IOTDOIT Mini Ultra-Small size ESP-M3 Serial Wireless WiFi Transmission Module Fully Compatible with ESP8266
Ask for Latest offers/availability : https://bit.ly/2WmyNyS
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
SKU: PGI-00130227 -
Motor Driver
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/3ldzBhW
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
SKU: PGI-00456144 -
Electronic Components & IC's
Double Sided Foam Tape – 20mm x 1Meter
Ask for Latest offer / Availability : https://bit.ly/2TNus6d
- Sticky on both sides of tape
- Fill gaps on irregular surfaces, distributes stress, seals, cushion, dampens vibrations & resists impact
- For mounting accessories and spares parts in cars, refrigerators, stationary and houses
- Width – 20mm
- Length – 1 Meter
SKU: PGI-00164 -
-
3D Accessories
DRV8825 stepper motor driver Module arduino 3D printer RAMPS1.4 RepRap StepStick
Ask for Latest offers/availability : https://bit.ly/3CLAup5
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- layer, 2 oz copper PCB for improved heat dissipation.
SKU: PGI-006721 -
-
-
Real Time Module (RTC)
DS1302 Real Time Clock Module (with CR2032 Battery)
Ask for latest offers/availability : https://bit.ly/2LgkVwJ
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
- Operating temperature: 0 degree — 70 degree
SKU: n/a -
-
Temperature and Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black Original Chip
Ask for latest offers/availability : https://bit.ly/2xYj0db
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: PGI-0043950 -
Electronic Components & IC's, Portable Oscilloscope
DS211 Mini Pocket Portable Oscilloscope
- Absolutely Open Hardware
- Rising/falling edge trigger
- Compact rectangular housing
- Large display screen
- Buttons on the side
- Mini pocket-sized
- Compact and lightweight
- Store file as BMP, DAT, BUF, or CSV format
- Use built-in flash disk to save/read waveform image
- Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp
- Output test signal: 10Hz—1MHz (1-2-5 sequence step)
- Synchronous mode: auto, normal, single, none, scan
SKU: n/a -
Electronic Components & IC's
DS212 Mini Pocket Portable Oscilloscope
Ask for Latest offer / Availability : https://bit.ly/3obXndq
- Absolutely Open Hardware
- Rising/falling edge trigger
- Compact rectangular housing
- Large display screen
- Buttons on the side
- Mini pocket-sized
- Compact and lightweight
- Store file as BMP, DAT, BUF, or CSV format
- Use built-in flash disk to save/read waveform image
- Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp
- Output test signal: 10Hz—1MHz (1-2-5 sequence step)
- Synchronous mode: auto, normal, single, none, scan
SKU: PGI-00387182 -
Tyres & Wheels
DS3231 Precise Real Time Clock Module I2C RTC AT24C32
Ask for Latest offers/availability : https://bit.ly/3i7baSE
- 1Hz output pin SQW.
- 32KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS3231 based RTC with 2032 Battery Holder.
- Highly Accurate RTC
- Real-Time Clock Counts
- Digital Temp Sensor Output.
- Register for Aging Trim.
- Two Time-of-Day Alarms.
- Programmable Square-Wave Output Signal.
- Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).
SKU: PGI-0011496 -
Real Time Module (RTC)
DS3231 Real Time Clock Module 3.3V 5V Precise, with battery
Ask for latest offers/availability : https://bit.ly/2zdgikV
- Supply voltage(V):+2.3 to +5.5
- operating temperature range:-40°C to +85°C
- Supported Raspberry Pi and Arduino
- Provide battery backup for continuous timing.
- Two calendar alarm.
- 1Hz and 32.768kHz output.
SKU: PGI-00699537 -
Electronic Switches/Keypad
DS9092+ iButton Probe with LED Light
Ask for latest offers/availability : https://bit.ly/3gduVVL
- Simple, low-cost metal stampings form a read/write probe for the iButton family
- Probe guides the entry of the iButton
- iButton slides over the surface to self-clean contacts
- Accessible shallow probe cavity simplifies removal of debris such as mud
- Flexible design supports panel-mount or hand-grip mount with optional tactile feedback
SKU: n/a -
Environmental Sensors
DSM501A PM2.5 Dust Sensor Module for Arduino, Air-Conditioners
Ask for latest offers/availability : https://bit.ly/2y2L7YG
- Can sense tobacco smoke and pollen, house dust and so on.
- It can measure 1 micron or more of small particles.
- Small size, lightweight, easy to install.
- 5 V input circuit for signal processing.
- Built-in airflow generator, you can attract the external atmosphere.
SKU: PGI-00418902 -
Display
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
DisplayDSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
Ask for Latest offer / Availability : https://bit.ly/3p5QrzX
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Maximum Real-time Sampling Rate: 1Msps
- Accuracy: 12Bit
- Sampling Buffer Depth: 1024 bytes
- Analog Bandwidth: 0-200KHz
SKU: PGI-0028471 -
3D Accessories
Dual H-bridge driver L293D Two DC motor or One Stepper Motor Module
Ask for Latest offers/availability : https://bit.ly/3ud0XZE
- Arduino / Raspberry Pi L293D H-Bridge 4 Channel Dc Motor Control Support Pulse With Modulation
- Tested in Arduino, Raspberry, IOIO & Node MCU
- Input Voltage: DC4.5v – 25V
- Output Current: 600mA Per Channel
- Peak Current: 1.2A Non Repetitive Per Channel Enable Facility
- IC Protection: Auto Shut on High Temperature
SKU: PGI-363 -
Motor Driver
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Ask for Latest offer / Availability : https://bit.ly/3l8ddVj
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: PGI-0028535 -
3D Accessories
Dual-H Bridge L293D 4 DC Motor Driver Module Robot 4WD Smart Car
Ask for Latest offers/availability : https://bit.ly/3kHon63
The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice .Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements .While leaving Road stepper motor interface can drive Road five line four-phase stepper motor or Road, two-phase four-wire stepper motor, very suitable for precise control requirements.
SKU: PGI-364 -
Microcontrollers
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: n/a
