Regular Product
Showing 241–264 of 388 results
-
Flight Controller & Accessories
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Flight Controller & AccessoriesKK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Ask for Latest offer / Availability : https://bit.ly/3v6MSg6
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU InvenSense Inc.
- INPUT VOLTAGE: 4.8V-6.0V.
- AVR INTERFACE: Standard 6 Pin.
- SIGNAL FROM RECEIVER: 1520us(5 channels).
- SIGNAL TO ESC: 1520us.
SKU: PGI-003106 -
Tyres & Wheels
L Clamp for side shaft Johnson gear motor
- Material: 1.5 mm thick MS steel
- Size: Motor mounting side: Height 40 mm, Width 40 mm;
- Bracket mounting side: Height 22 mm, Width 40 mm
- A hole for Motor mounting: 26 mm diameter(M3.3 ).
- Holes for Bracket mounting: Six holes of 3mm.
- Weight: 20 gm
SKU: n/a -
IC's
L293D DIP Motor Driver IC (pack of 10 )
Ask for Latest offer / Availability : https://bit.ly/3qDX2lB
- Wide range of supply voltage from 4.5 to 36v
- Separate Input Logic Supply can be provided
- Output Current per channel 1A for L293 and 600mA for L293D
- Peak Current per channel 2A for L293 and 1.2A for L293D
- Output Clamp diodes are provided to drive inductive loads in L293D.
- Automatic Thermal Shutdown
SKU: n/a -
Electronic Components & IC's
L293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
Electronic Components & IC'sL293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
- This is most commonly used driver circuit in robots.
- DC and Stepper motors for micro mouse, line following robots, robot arms Features.
- motor supply current: 600 mA per motor.
- The driver two holes of for easy mounting.
SKU: n/a -
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog Blaster
L293D Motor Driver/Servo Shield for Arduino
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog BlasterL293D Motor Driver/Servo Shield for Arduino
Ask for Latest offers/availability : https://bit.ly/3FBPqs6
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: PGI-009736 -
Motors | Drivers | Actuators Categories, Prayog Blaster
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Motors | Drivers | Actuators Categories, Prayog BlasterL298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Ask for Latest offers/availability : https://bit.ly/3kT4uaR
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
SKU: PGI-0051971 -
Arduino Sensors
LDR Light Sensitive Resistor for Light Sensor (5 mm)
- The maximum voltage (V-dc): 150
- The maximum power dissipation (mW): 100
- Ambient temperature (° C): – 30 — +70
- Spectral peak (nm): 540
- Light resistance (10Lux) (KΩ): 2-5
- Dark resistance (MΩ):0.2
- Photoresistor is widely used in toys, lamps, cameras and other industries.
SKU: n/a -
Prayog Blaster, Sensors, Temperature and Humidity Sensor
LM35 TO-92-3 Board Mount Temperature Sensors
Prayog Blaster, Sensors, Temperature and Humidity SensorLM35 TO-92-3 Board Mount Temperature Sensors
Ask for Latest offers/availability : https://bit.ly/2O3hG0X
- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
SKU: PGI-00162126 -
IC's
LM358 IC DIP-8 Chip IC Dual Operational Amplifier (pack of 10 pcs)
Ask for Latest offer / Availability : https://bit.ly/3p7tlZN
- Internal frequency compensation
- Low input bias current
- Low input offset voltage and offset current
- Common mode input voltage range, including the grounding
- Differential mode input voltage range, equal to the supply voltage range
SKU: n/a -
IC's
LM358 IC DIP-8 Chip IC Dual Operational Amplifier (Pack of 10)
Ask for Latest offer / Availability : https://bit.ly/2Y4uwx6
- Internal frequency compensation
- Low input bias current
- Low input offset voltage and offset current
- Common mode input voltage range, including the grounding
- Differential mode input voltage range, equal to the supply voltage range
SKU: n/a -
IC's
LM3909 – LED Flasher/Oscillator (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/364m9Gd
- Finding flashlights in the dark, or locating boat mooring floats
- Sales and advertising gimmicks
- Emergency locators, for instance on fire extinguishers
- Toys and novelties
- Electronic applications such as trigger and sawtooth generators
- Siren for toy fire engine, (combined oscillator, speaker driver)
- Warning indicators powered by 1.4V to 200V
SKU: n/a -
IC's
LM3914 – Dot/Bar Display Driver
Ask for Latest offer / Availability : https://bit.ly/39YbFcR
- Provides a Linear Analog Display from Analog Voltage Input
- Drives LEDs, LCDs or vacuum fluorescents
- Bar or dot display mode externally selectable by user
- Expandable to displays of 100 steps
- LED driver outputs are current regulated,open-collectors
- Outputs can interface with TTL or CMOS logic
- The internal 10-step divider is floating and can be referenced to a wide range of voltages
SKU: n/a -
IC's
LM3915 – Dot/Bar Display Driver (pack of 3 )
Ask for Latest offer / Availability : https://bit.ly/3p8f13c
- Provides a Logarithmic 3dB Analog Display from Analog Voltage Input
- Drives LED’s, LCD’s or Vacuum Flourescents
- Bar or Dot Display Mode
- Expandable to 100 Steps
- Internal Voltage Reference from 1.2V to 12V
- Operates with single supply of 3V to 25V
- Inputs operate down to ground
- Output current programmable from 1 mA to 30 mA
- Input withstands ±35V without damage or false outputs
- Outputs are current regulated, open collectors
- Directly drives TTL or CMOS
- The internal 10-step divider is floating and can be referenced to a wide range of voltages
SKU: n/a -
IC's
LM393 -Low Power Low Offset Voltage Dual Comparator (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/2NgYMTh
- Single Supply or Dual Supplies
- Wide Range of Supply Voltage
- Max Rating: 2 V to 36 V
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V
- Low Output Saturation Voltage
SKU: n/a -
-
IC's
LM7805 Voltage Regulator IC (Pack of 20)
Ask for Latest offer / Availability : https://bit.ly/2Y0HxYH
- Fixed-Output Regulator
- Positive Regulator in Negative Configuration
- Adjustable Output Regulator
- Current Regulator
- Adjustable DC Voltage Regulator
- Regulated Dual-Supply
- Output Polarity-Reversal-Protection Circuit
- Reverse bias projection Circuit
SKU: n/a -
IC's
LM7812 Positive Voltage Regulator IC12V/1.5A for Power Supply Circuit (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/362ReKF
- The Input pin is the pin that accepts the incoming DC voltage (12V – 28V)
- Ground pin establishes the ground for the regulator. May get heated at higher voltages.
- The Output pin is the regulated 12 volts DC.
SKU: n/a -
IC's
LM8560 IC – Digital Alarm Clock
Ask for Latest offer / Availability : https://bit.ly/3p3G2Vo
- Built-in automatic fast forward function for hour and minute settings
- Built-in sleep timer function (maximum intervals of 59 minutes or 1 hours and 59 minutes)
- Built-in snooze function supporting repeat use
- Equipped with power failure display function
- 900Hz output for alarm tone
SKU: n/a
