Shop
Showing 1441–1464 of 1946 results
-
Motors | Drivers | Actuators Categories
Planetary DC Geared Motor 430 RPM 11N-cm 12V IG32E-14K
Ask for Latest offer / Availability : https://bit.ly/3DAX986
- Brand: Cytron
- Voltage: 12VDC
- Rated Torque: ~1.122 kg.cm (110 mN.m)
- Rated Speed: 430 RPM
- Rated Power: 7 W
- Gear ratio: 14:1
- Encoder Output: 98 PPR
- Gear Material: Metal
SKU: PGI-007974 -
Motors | Drivers | Actuators Categories
Planetary DC Geared Motor 60 RPM 67N-CM 12V IG32E-100K
Ask for Latest offer / Availability : https://bit.ly/3v0C57O
- Brand: Cytron
- Voltage: 12VDC
- Rated Torque: ~6.73 kg.cm (660 mN.m)
- Rated Speed: 60 RPM
- Rated Current: 900mA
- Rated Power: 7W
- Gear ratio: 100:1
- Encoder Output: 700 (PPR) single channel output
SKU: PGI-0024492 -
Plastic Gear
Plastic Pinion Gear 25T
Ask for Latest offer / Availability : https://bit.ly/3gPRulK
- Outer Diameter: 25mm
- Number of Teeth: 25
- Gear Mod: Mod 1.6
- Inner Bore: 6mm, comes with set screw to securely attach the gear to the shaft
- Application: Perfect for use in science projects, robotics, etc
SKU: PGI-00188 -
Plastic Gear
Plastic Pinion Gear 60T
Ask for Latest offer / Availability : https://bit.ly/3qkJ21d
- Outer Diameter: 62mm
- Number of Teeth: 60
- Gear Mod: Mod 1
- Inner Bore: 6mm, comes with set screw to securely attach the gear to the shaft
- Application: Perfect for use in science projects, robotics, etc
SKU: PGI-00187 -
-
Raspberry Pi Accessories
Plusivo Pi 4 Super Starter Kit without Raspberry Pi
Ask for Latest offer / Availability : https://bit.ly/389LXmn
- All in one Plusivo Pi 4 Super Starter Kit
- A basic beginner kit with all the necessary components to jumpstart your interest in learning and making your own projects
SKU: PGI-00699602 -
Electronic Components & IC's, Soldering Iron
Plusivo Soldering Iron Kit For Electronics
- All in one Soldering Kit For Electronics by Plusivo
- Plug Type: EU
- Complete Soldering Kit: It includes the complete soldering tools for various uses, from home DIY, electrical repairs jobs and other soldering projects.
SKU: PGI-00699607 -
Environmental Sensors
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
Ask for Latest offer / Availability : https://bit.ly/2S38yIg
- Power supply voltage: DC5 ± 2V
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
SKU: PGI-0028624 -
Raspberry Pi Accessories
PN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Raspberry Pi AccessoriesPN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Ask for Latest offer / Availability : https://bit.ly/39i11gN
- Small size, it is easy to embed into your designs
- Support for I2C, SPI, HSU (high-speed UART), you can easily switch between these communications, you can easily switch the communication through the lower left corner of the board toggle switch, detailed operation method can refer to the product manual
- Work in NFC Mode or RFID reader / writer Mode
- Mifare 1k, 4k, Ultralight, and DesFire card
- ISO / IEC 14443-4 cards, such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards, such as IRT5001 card
- FeliCa cards, such as RCS_860 and RCS_854
- Plug and Play compatible.
SKU: PGI-00699611 -
Rfid Card, Tags & Readers
PN532 NFC RFID Read / Write Module V3 Kit
Ask for latest offers/availability : https://bit.ly/3azPB6m
- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
SKU: n/a -
Raspberry Pi Accessories
PN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Raspberry Pi AccessoriesPN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Ask for Latest offer / Availability : https://bit.ly/3kdcBQB
- Small dimension and easy to embed into your project
- Support I2C, SPI and HSU (High Speed UART), easy to change between those modes
- Support RFID reading and writing, P2P communication with peers, NFC with Android phone
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Up to 5cm~7cm reading distance
- On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Arduino compatible, plug in and play with our shield
SKU: n/a -
-
-
Temperature and Humidity Sensor
Portable Digital Probe Food Meat Thermometer
Ask for latest offers/availability : https://bit.ly/2S5dexd
- Low battery sensation and display
- The memory of the last measure
- 15 minutes auto shutdown for power saving (option)
- Optional Temperature Unit: / F
- Buttons: ON/OFF, degree/F, HOLD
- Operating Temperature (°C): -50 to +300
SKU: PGI-00301472 -
Hardware & Tools, Prayog Blaster
Precision Screw Driver Set
Ask for Latest offers/availability : https://bit.ly/3crmXXZ
- The product contains six different blades.
- Blades made from High Grade Alloy Steel .
- Scientifically hardened blades .
- Fully insulated grip handles with crown at the top .
SKU: PGI-001067312 -
3D Accessories
Presall 3D Scanner Board Kit Ciclop Expansion Board
Ask for Latest offers/availability : https://bit.ly/2XSCMUj
- Supply Voltage: 12VDC.
- No. of motor drivers mounts: 2.
- Onboard Reset button.
- Thermal shutdown circuitry.
- Ground fault protection.
- Load short-circuit protection
SKU: PGI-0051650 -
-
Arduino Boards
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM ports: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceivers: RX / TX.
SKU: PGI-00409791 -
-
-
Temperature and Humidity Sensor
PT100-S Waterproof 1m 30mm Probe PTFE FTARP05 Stainless Steel Pole Probe Temperature Sensor
Temperature and Humidity SensorPT100-S Waterproof 1m 30mm Probe PTFE FTARP05 Stainless Steel Pole Probe Temperature Sensor
Ask for latest offers/availability : https://bit.ly/2VA9INv
- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
SKU: PGI-0043973
