Shop
Showing 673–696 of 1946 resultsSorted by price: high to low
-
Raspberry Pi Accessories
PN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Raspberry Pi AccessoriesPN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Ask for Latest offer / Availability : https://bit.ly/3kdcBQB
- Small dimension and easy to embed into your project
- Support I2C, SPI and HSU (High Speed UART), easy to change between those modes
- Support RFID reading and writing, P2P communication with peers, NFC with Android phone
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Up to 5cm~7cm reading distance
- On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Arduino compatible, plug in and play with our shield
SKU: n/a -
3D Accessories
Dual-H Bridge L293D 4 DC Motor Driver Module Robot 4WD Smart Car
Ask for Latest offers/availability : https://bit.ly/3kHon63
The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice .Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements .While leaving Road stepper motor interface can drive Road five line four-phase stepper motor or Road, two-phase four-wire stepper motor, very suitable for precise control requirements.
SKU: PGI-364 -
Motor Driver
TMC2208 Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/3iSE6P0
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: PGI-00699623 -
Load / Pressure / Force / Flex Sensor
GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
Load / Pressure / Force / Flex SensorGY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
Ask for latest offers/availability : https://bit.ly/3cQmw8d
- The built-in 24bit AD converter.
- Immersion gold PCB, high quality, machine welding process to ensure quality.
- Power supply: 3 – 5V ( internal low dropout regulator ).
- Communication modes: Standard the IIC / SPI communication protocol.
SKU: PGI-00488983 -
Water Flow And Level Sensor
Turbidity Sensor with Module
Ask for latest offers/availability : https://bit.ly/2KEltMw
- Operating Voltage: 5VDC.
- Current: 30mA (MAX).
- Operating temperature: -30 ° C to 80 ° C.
- Compatible with Arduino, Raspberry Pi, AVR, PIC, etc.
- Measuring Range: 0 ~ 1000 NTU.
SKU: PGI-0062828 -
Current and Voltage Sensor
SparkFun Current Sensor Breakout – ACS723
Ask for latest offers/availability : https://bit.ly/2x1tkka
- Analog output with bandwidth adjustable to 80kHz.
- Measures DC and AC currents up to 10 mA ~ 5A.
- Full electrical isolation of measured and sensed circuits.
- The version without the op-amp has a base sensitivity of 400mV/A.
SKU: PGI-00637309 -
Multirotor motors, Quad Copter & Multi Rotors
Readytosky MT2204 2300KV CW Brushless Motor
Ask for Latest offer / Availability : https://bit.ly/2xqw7Un
- Motor KV: 2300(RPM/V)
- Maximum Wattage: 350W
- Li-PO Batteries: 2S-3S
- Shaft Diameter: 5 mm
- Maximum Current: 25 A
- Maximum Voltage: 15 V
SKU: PGI-00 792141 -
-
Quad Copter & Multi Rotors
APM / PIXHAWK 3in1 Power Module ESC Distribution Board
Ask for Latest offers/availability : https://bit.ly/2WI2jzf
- Size: 50 x 50 x 4.5 mm.
- Mounted hole size: 4 x M3.
- Power input (V): DC 7 – 26.
- Suitable for APM 2.5, 2.6, 2.8 pixhawk.
- Suitable for Quadcopter Hexacopter Octocopter.
- BEC Output: 3A 5V.
SKU: PGI-00631332 -
Batteries, Orange (Premium li-po)
Orange 1000mAh 2S 20C/40C (7.4v) Lithium Polymer Battery Pack (Lipo)
Batteries, Orange (Premium li-po)Orange 1000mAh 2S 20C/40C (7.4v) Lithium Polymer Battery Pack (Lipo)
Ask for Latest offers/availability : https://bit.ly/3CnyNxG
- Weight: 51 gm.
- Output Voltage: 7.4V.
- Dimensions : 102 x 20 x 12(LxWxH) (mm ).
- Max Continuous Discharge : 20C(20A).
- Max Burst Discharge : 40C(25A).
- Balance Plug: JST-XH.
- Discharge Plug: Jst
SKU: PGI-0043021 -
power supply
NHP 5V 8A 40W Switch Mode Power Supply (SMPS)
Ask for Latest offer / Availability : https://bit.ly/3n9LXrD
- AC Input Voltage: 170 ~ 270 V.
- Stable Output Voltage (V DC): 5.
- Output Current (Amp): 8.
- Output Power (Watt): 40.
- Line Regulation: 0.5% (FULL LOAD).
- Load Regulation: 1% (230 VAC I/P).
- Operating Temperature (°C): -20 ~ +70.
SKU: PGI-564860 -
Hardware & Tools
1000 MM long Chrome Plated Smooth Rod Diameter 12 MM
Ask for Latest offer / Availability : https://bit.ly/3zhYqPa
- High precision, high hardness, high stability.
- Strictly control every precision process to ensure quality.
- Simple design, durable material, high temperature preheat treatment, accurate outer hole size,
SKU: PGI-00501415 -
Motor Driver
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/3ldzBhW
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
SKU: PGI-00456144 -
Arduino Boards, Prayog Blaster
Arduino Uno R3 with Cable
Ask for Latest offer / Availability : https://bit.ly/2O6XPgI
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
SKU: PGI-006337 -
Esp Wifi Module
ESPresso Lite V2.0 ESP8266, Espressif, IoT, wifi
Ask for latest offers/availability : https://bit.ly/2yf1Ec7
-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
SKU: n/a -
-
-
-
-
Load / Pressure / Force / Flex Sensor
FlexiForce A401 Force Sensor
Ask for latest offers/availability : https://bit.ly/2YbAVaZ
- The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125464 -
3D Accessories
1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Ask for Latest offer / Availability : https://bit.ly/2LezdkI
- Lead Screw Material: 304 Stainless Steel.
- Length: 1000mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 10 x 13 x 22 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use
SKU: PGI-0051588 -
Development Board
LinkIt Connect 7681 – Wi-Fi HDK for IoT
Ask for Latest offer / Availability : https://bit.ly/377CA4F
- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: PGI-00336555 -
Esp Wifi Module
Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
Ask for latest offers/availability : https://bit.ly/2Sg3WP8
- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: n/a
