Shop
Showing 601–624 of 1946 results
-
Light/Color Sensor
CJMCU-34725 TCS34725 Color Sensor RGB Module
Ask for latest offers/availability : https://bit.ly/2xHe909
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: PGI-0062228 -
Light/Color Sensor
CJMCU-TEMT6000 An Ambient Light Sensor
Ask for latest offers/availability : https://bit.ly/3auRj8Y
- AEC-Q101 qualified
- High photosensitivity
- Near-Human Eye Spectral Response
- Scalable Output Voltage
- Adapted to human eye responsivity
- Lead (Pb)-free reflow soldering
- Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
SKU: PGI-00130228 -
Break out Boards
CJMCU-TRRS 3.5mm Jack AV Stereo Module
Ask for latest offers/availability : https://bit.ly/3fzzbic
- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- Dimensions: 20 x 16 x 8(L x W x H) mm
- Weight: 2 gm
SKU: PGI-0031293 -
Robot Kits
Cligo 2 WD Smart Intelligent DIY Robot Car Kit V1.0 for Kids
Ask for Latest offer / Availability : https://bit.ly/34KSlNa
- Easy Mechs branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
- Ages: 10+
SKU: PGI-00630108 -
-
-
Robot Kits
Cligo Wireless Bluetooth Controlled Gripper Robot Car Kit For Kids
Ask for Latest offer / Availability : https://bit.ly/3uXSgEl
- EasyMech’s branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
- No Remote Control required you can operate with your Mobile Phone
- Ages: 10+
SKU: PGI-00982156 -
Robot Kits
Cligo Wireless Remote Controlled Smart Robot Car Kit For Kids
Ask for Latest offer / Availability : https://bit.ly/3kcN3Tf
- EasyMech’s branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
- EasyMech Remote Control provided
- Ages: 10+
SKU: n/a -
3D Accessories
CM108 Chipset USB 2.0 to 3D Audio Sound Card Adapter Virtual 5.1 CH Sound Track
Ask for Latest offers/availability : https://bit.ly/3uj2pcP
Eliminate the need for a traditional sound card with this USB Sound Adapter. Connect a speaker or headphone directly to the adapter in order to enjoy the virtual 5.1 channel sound track. Get this great adapter without hesitation.
SKU: PGI-550 -
3D Accessories
CNC 3D Printer Mech Endstop Switch For RepRap Makerbot Prusa Mendel RAMPS1.4
Ask for Latest offers/availability : https://bit.ly/3o6LBVv
The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin .100″” pitch header and accepts a standard, old-style CD-ROM audio connector cable. Brand new and high quality. The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.
SKU: PGI-0012030 -
3D Accessories
CNC shield v3 engraving machine 3D Printer
Ask for Latest offers/availability : https://bit.ly/3kJmJRJ
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use. UNO for Arduino module IO port correspondence introduction.
SKU: PGI-0012202 -
Gas Sensor
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector With LCD Display
Ask for latest offers/availability : https://bit.ly/2xZs1mo
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
SKU: PGI-00456157 -
3D Printers
Componant kit for 3D printer – All in 1
Ask for Latest offer / Availability : https://bit.ly/3kVdN9j
- All in one electronics kit for 3D printer
- USB type B receptacle.
- SD Card adds on available.
- Fits 5 Pololu stepper driver board.
- LEDs indicate when the heater outputs on.
- Expandable to control other accessories.
- Heated bed control with an additional 11A fuse.
SKU: PGI-00781356 -
3D Accessories, 3D Printer Accessories
Component kit for 3D printer – Advance
Ask for Latest offer / Availability : https://bit.ly/3tEN5ZT
- USB type B receptacle.
- SD Card adds on available.
- Fits 5 Pololu stepper driver board.
- LEDs indicate when the heater outputs on.
- Expandable to control other accessories.Heated bed control with an additional 11A fuse.
SKU: PGI-00781355 -
3D Printer Accessories
Component kit for 3D printer – Beginner
Ask for Latest offer / Availability : https://bit.ly/3n5wUOD
- USB type B receptacle.
- SD Card adds on available.
- Fits 5 Pololu stepper driver board.
- LEDs indicate when the heater outputs on.
- Expandable to control other accessories.
SKU: PGI-00781358 -
Development Board
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
Ask for latest offers/availability : https://bit.ly/3w32Icc
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
SKU: PGI-003263 -
Robocon, Rotary Encoders
Correlation Photoelectric Infrared Count Sensor Module
- The width of the optical coupling slot: 10mm
- Single signal output.
- The circuit board output switch!
- The output valid signal is low.
- Can be used for workpiece counts.
- It can also be used for industry counting, motor speed testing.
SKU: PGI-00835790
