Shop
Showing 265–288 of 1946 results
-
Motors | Drivers | Actuators Categories
55mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55mm Blade Propeller Prop with 615 CW & CCW Coreless Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability :https://bit.ly/3jMYqSk
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
SKU: PGI-0046616 -
Motors | Drivers | Actuators Categories
55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Motors | Drivers | Actuators Categories55mm Blade Propeller Prop with 720 CW & CCW Brushed Motor For Indoor Racing Drone Quad-copter
Ask for Latest offer / Availability : https://bit.ly/3ioSE8I
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
- Prop. Length: 55mm
SKU: PGI-0046615 -
-
Current and Voltage Sensor
5A 12V Overcurrent Protection Sensor Module AC Current Detection Sensor
Ask for Latest offer / Availability : https://bit.ly/3iqtS50
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
SKU: PGI-00400224 -
Current and Voltage Sensor
5A range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2Y0Odal
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SKU: PGI-0023910 -
Current and Voltage Sensor
5A range of single-phase AC current sensor module
Ask for latest offers/availability : https://bit.ly/2VTjwRL
- Onboard precision microcurrent transformer.
- Onboard sampling resistor.
- The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
SKU: PGI-0028369 -
Electronic Switches/Keypad
5D Rocker Joystick for Arduino, MCU, AVR Game
Ask for latest offers/availability : https://bit.ly/2A15lmx
- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
SKU: n/a -
Led
5M WS2812B 5V Addressable RGB Waterproof LED Strip Light 60LED’s/m
- Installation surface must be smooth, clean and dry
- The part of LED components cannot be fixed on the surface of the sharp edges
- The strip should not be collided or crushed
- The strip can be cut following the cutting lines
- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
- The one-wire digital control interface
- Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
SKU: PGI-0056272 -
Raspberry PI
5MP OV5647 Wide Angle Fish-eye Lens Night Vision Camera for Raspberry Pi 3 B+
Ask for Latest offers/availability : https://bit.ly/3Eml5wT
- Wide-angle fish-eye lens
- Manual Adjustable Focus
- Field of View Angle: 130°
- Easy to install and Use
- Useful for real-time Photography and Videos
SKU: PGI-00219968 -
Raspberry Pi Camera
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
Ask for Latest offer / Availability : https://bit.ly/3kBwUWE
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi 3 Model B.
-
Plug-n-Play camera for Raspberry Pi 3 Model B.
SKU: PGI-0010957 -
Raspberry Pi Camera
5MP Raspberry Pi Zero W Camera Module W/ HBV FFC Cable
Ask for Latest offer / Availability : https://bit.ly/3uMXTDq
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi Zero W.
-
Directly plug into Raspberry Pi Board (besides HDMI port)
SKU: PGI-0051705 -
Plugs & Connectors
5pc 2-Pole PCB Screw Terminal
Ask for Latest offer / Availability : https://bit.ly/3vyRESH
- Rust Free metal contact.
- High quality plastic caps for better grip.
- High current rating.
- Good quality Insulating material for shock proof mounting.
- Saves space due to the small design
- Screw connection with tension sleeve
- Maximum contact force ensures a low-temperature rise
- Connection in accordance with EN-VDE Standard.
SKU: PGI-00154 -
3D Accessories
5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
Ask For Availability : https://bit.ly/2pRN2LJ
- AC Input Voltage: 100-120VAC/4.8A or 200-240VAC/2.4A
- Layer Resolution: ±0.10mm
- Printing Material: PLA, ABS, PVA, PEVA, HIPS
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
SKU: PGI-003621 -
-
Relay
5V 1 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/2XiEt9m
- Operating Voltage: 5 V
- Max Current : 20 mA
- Relay Contact Current Capacity at 250 V AC: 10 A
- Relay Contact Current Capacity at 30 V DC: 10 A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
SKU: PGI-009716 -
Relay
5V 1 Channel Relay Module With Light Coupling
Ask for latest offers/availability : https://bit.ly/2AG8rwo
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
SKU: PGI-00618455 -
Relay
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
Ask for latest offers/availability : https://bit.ly/2ymC5pO
- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
SKU: PGI-0028487 -
Relay
5V 10A 2 Channel Relay Module Shield for Arduino
Ask for Latest offer / Availability : https://bit.ly/3804sZB
- Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
- Weight: 30g
- PCB color black
- Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
- Relay high quality single relay single pole double throw
- A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
- Low suction, high level release
SKU: PGI-0024 -
Relay
5V 2 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/36dK6Kf
- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
SKU: n/a -
Relay
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
Ask for latest offers/availability : https://bit.ly/3cOJ61A
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Input control signal voltage:
- 0-0.5V the state of low-level relay OFF
- 0.5-3.3V Unknown State
- 3.3-5V high-level relay ON
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
SKU: PGI-0028500
