Shop
Showing 1225–1248 of 1946 results
-
N20 Motor without Encoder
N20 6V 200RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2VF6jzu
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 6V.
- Output Speed: 200RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476696 -
N20 Motor without Encoder
N20 6V 50RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3klcKlH
- Encoder Test Wire Length: 140mm.
- Rated Voltage: DC 6V.
- Output Speed: 50RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476547 -
N20 Motor without Encoder
N20-12V-300 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3iAr5s7
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075776 -
N20 Motor without Encoder
N20-3V-15 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/2Tl8tDM
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475044 -
N20 Motor without Encoder
N20-3V-200 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3hHpqBu
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475212 -
N20 Motor without Encoder
N20-3V-300 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3esLzBy
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475324 -
N20 Motor without Encoder
N20-6V-200 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3xI5a8u
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075011 -
N20 Motor without Encoder
N20-6V-30 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/36Dazlt
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00470837 -
N20 Motor without Encoder
N20-6V-300 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3z9MaAi
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075800 -
N20 Motor without Encoder
N20-6V-400 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3ifeN82
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075813 -
N20 Motor without Encoder
N20-6V-60 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/36GfJgw
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075027 -
Arduino Boards
Nano Board V3.0 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Arduino BoardsNano Board V3.0 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Ask for Latest offer / Availability : https://bit.ly/3sv1y6O
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: PGI-0030888 -
Advance Controller Board
NANO32 ESP32 IoT Development Board
Ask for latest offers/availability : https://bit.ly/35tIThq
- ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -
Quad Copter & Multi Rotors
Naze 32 Full REV6 Flight Controller with Compass & Barometer
Ask for Latest offer / Availability : https://bit.ly/3kOgGeL
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611 barometer.
- 128mbit flash.
SKU: n/a -
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
Ask for Latest offer / Availability : https://bit.ly/2UMDX6y
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: PGI-0029597 -
IC's
NE5532 – Dual Low Noise Operational Amplifiers (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qN910h
- Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz
- Unity-Gain Bandwidth: 10 MHz Typ
- Common-Mode Rejection Ratio: 100 dB Typ
- High DC Voltage Gain: 100 V/mV Typ
- Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω
- High Slew Rate: 9 V/µs Typ
SKU: n/a -
Relay
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
Ask for latest offers/availability : https://bit.ly/3ckqia1
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
SKU: n/a -
Relay
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
RelayNE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
Ask for latest offers/availability : https://bit.ly/2WAojaY
- Timing from microseconds to long hours.
- Simple circuit design.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Supply Voltage (V): 12
- Adjustable Time(s): 0 to 10
- AC Control Voltage(V): 0-250 @max. 10A
- DC Control Voltage(V): 0-30 @max. 10A
SKU: n/a -
IC's
NE555 Timer IC (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/3sKwRvf
- Timing From Microseconds to Hours
- Astable or Monostable Operation
- Adjustable Duty Cycle
- TTL-Compatible Output Can Sink or Source
Up to 200 mA - On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
SKU: n/a -
-
3D Accessories, Prayog Blaster
NEMA17 4.2 kg-cm Stepper Motor (With Detachable 70 cm Cable)
Ask for Latest offer / Availability : https://bit.ly/3bQHjev
-
- Step Angle: 1.8 °
- Current: 1.2 A/Phase
- Holding Torque: 4.2 kg-cm
- Detent torque: 2.2 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 5 mm
SKU: PG-0051732 -
