Shop
Showing 1081–1104 of 1946 resultsSorted by price: high to low
-
Thermoelectric Peltier Cooler
TEC1-12710 40x40mm Thermoelectric Cooler 10A Peltier Module
Ask for latest offers/availability : https://bit.ly/2y3ja39
- Model number: TEC1-12710
- Operating Voltage: 12V
- Maximum Voltage- Umax (V) : 15V
- Maximum Current- Imax (A) : 10A
- Maximum Power : 120 W
- Power Cord: 25 cm.
SKU: PGI-0043627 -
Arduino
Cytron Maker Drive H-Bridge Motor Driver
- Dual channel, Bi-directional control motor driver
- Support motor voltage from 2.5V to 9.5VDC
- Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
- 5V Output (200mA) to power the controller.
- Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Regenerative Braking
SKU: n/a -
IC's
SG3524 Regulating Pulse Width Modulator (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qAgH5U
- Contains the Necessary Control Circuit for a Regulator Power Supply Inverter/Regulator
- Complete PWM Power Control Circuitry
- Single Ended or Push-Pull Outputs
- Line and Load Regulator of 0.2%
- 1% Maximum Temperature Variation
SKU: n/a -
-
-
IC's
NE5532 – Dual Low Noise Operational Amplifiers (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qN910h
- Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz
- Unity-Gain Bandwidth: 10 MHz Typ
- Common-Mode Rejection Ratio: 100 dB Typ
- High DC Voltage Gain: 100 V/mV Typ
- Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω
- High Slew Rate: 9 V/µs Typ
SKU: n/a -
-
Official Raspberry Pi Boards and Hats, Raspberry PI
Raspberry Pi Pico
Ask for Latest offer / Availability : https://bit.ly/3og0QaQ
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Temperature sensor
SKU: PGI-00894292 -
-
Electronic Switches/Keypad
SeeedStudio Grove Switch (P)
Ask for latest offers/availability : https://bit.ly/3e4V0om
- Operating voltage: 3.3 V/ 5 V
- Operating temperature: -20°C to 80°C
- Force range: 1.47 N – 2.45 N
- Long-lasting life
- Grove compatible interface
- Panel mount feature
- Compact modular design
- Plug-and-play
SKU: n/a -
-
IR and RF Transmitter and Receivers
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
Ask for latest offers/availability : https://bit.ly/2W4uiWN
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: n/a -
Esp Wifi Module
Seeedstudio ESP8285 Wi-Fi SoC Module
Ask for latest offers/availability : https://bit.ly/3cVtY27
- The smallest 802.11b/g/n Wi-Fi SoC module
- Uses low power 32bit CPU and compatible with the application processor
- Main frequency up to 160MHz
- Built-in 10Bit high precision ADC
- Support UART/GPIO/PWM/ADC interface
- Integrate Wi-Fi MAC/BB/RF/PA/LNA
SKU: n/a -
Load / Pressure / Force / Flex Sensor
YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale
Load / Pressure / Force / Flex SensorYZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale
Ask for latest offers/availability : https://bit.ly/3aJEiIZ
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
SKU: PGI-0028651 -
Water Flow And Level Sensor
SeeedStudio Grove Water Sensor
Ask for latest offers/availability : https://bit.ly/2VBptUy
- Working voltage: 4.75V to 5.25V
- Working humidity (without condensation): 10% to 90%
- Working temperature: 10℃ to 30℃
- Current: <20mA
- High sensitivity
- Grove compatible interface
- Low power consumption
SKU: PGI-00595200 -
Temperature and Humidity Sensor
SeeedStudio Grove Moisture Sensor
Ask for latest offers/availability : https://bit.ly/3ePkoQb
- Operating voltage: 3.3 V to 5 V
- Operating current: 0 to 35 mA
- 6 cm x 2.4 cm Grove module
- Soil resistivity measurement
- Grove compatible interface (u-blox version)
SKU: PGI-00596780 -
Temperature and Humidity Sensor
SeeedStudio Grove Temperature Sensor
Ask for latest offers/availability : https://bit.ly/2yIDGWx
- Operating Voltage: 3.3 V to 5 V
- Accuracy: ± 1.5°C
- Zero power resistance: 100 KΩ
- Operating temperature range: -40 ~ +125 ℃
- Thermistor: NCP18WF104F03RC (NTC)
- Includes Grove connector cable
- Grove compatible interface
SKU: PGI-00590640 -
Raspberry Pi Camera
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
Ask for Latest offer / Availability : https://bit.ly/3kBwUWE
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
-
Fully Compatible with Raspberry Pi 3 Model B.
-
Plug-n-Play camera for Raspberry Pi 3 Model B.
SKU: PGI-0010957 -
Tyres & Wheels
DS3231 Precise Real Time Clock Module I2C RTC AT24C32
Ask for Latest offers/availability : https://bit.ly/3i7baSE
- 1Hz output pin SQW.
- 32KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS3231 based RTC with 2032 Battery Holder.
- Highly Accurate RTC
- Real-Time Clock Counts
- Digital Temp Sensor Output.
- Register for Aging Trim.
- Two Time-of-Day Alarms.
- Programmable Square-Wave Output Signal.
- Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).
SKU: PGI-0011496 -
IC's
CD4066 – Quad Bilateral Switch (Pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qFLWwe
- Quad Bilateral Switch for Transmission or Multiplexing Analog or Digital Signals
- Pin for Pin Compatible with the CD4016
- Improved ON Resistance over CD4016
- Operating Temperature to 85oC
- Low Power TTL
SKU: n/a
