Shop
Showing 1033–1056 of 1946 results
-
IC's
LF356 JFET input op-amp (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3ofB86J
- Low Supply Current with Large Gain Bandwidth Product
- Offset Voltage: 2 mV max
- Low Input Bias Current: 30pA
- Wide Gain Bandwidth: 2.5 MHz
- High Slew Rate: 5 V/µs
- Low Supply Current: 3.6mA
- Low Total Harmonic Distortion: <0.02%
SKU: n/a -
-
-
Arduino Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Ask for Latest offers/availability : https://bit.ly/3bsadRC
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: PGI-0028446 -
Wearable Electronics
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Ask for latest offers/availability : https://bit.ly/3bVyH30
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Wearable Electronics
LilyPad Button Board Module For Arduino
Ask for latest offers/availability : https://bit.ly/3d0cjqy
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: n/a -
Wearable Electronics
LilyPad Buzzer
Ask for latest offers/availability : https://bit.ly/36qXY3C
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: n/a -
-
Wearable Electronics
LilyPad LED Blue Color
Ask for latest offers/availability : https://bit.ly/3ggbA6r
- LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
SKU: n/a -
Wearable Electronics
LilyPad LED Green Color
Ask for latest offers/availability : https://bit.ly/2Xop8Ed
- LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
SKU: PGI-0053325 -
Wearable Electronics
LilyPad LED White Color
Ask for latest offers/availability : https://bit.ly/3gg5q6p
- LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
SKU: n/a -
Wearable Electronics
LilyPad Slide Switch Module
Ask for latest offers/availability : https://bit.ly/3eaiDvG
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: PGI-0053479 -
Wearable Electronics
LilyPad Tri-Color LED RGB Module for Arduino
Ask for latest offers/availability : https://bit.ly/3gc62Ke
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: PGI-0052476 -
-
Development Board
LinkIt Connect 7681 – Wi-Fi HDK for IoT
Ask for Latest offer / Availability : https://bit.ly/377CA4F
- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: PGI-00336555 -
Lipo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
Ask for Latest offer / Availability : https://bit.ly/38EKmow
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: PGI-002753 -
Environmental Sensors
Liquid pH Value Detection Sensor for Arduino
Ask for latest offers/availability : https://bit.ly/2KwE3GF
- Heating voltage: 5±0.2V
- Working current: 5-10mA
- The detection concentration range: PH0-14
- The detection range of temperature: 0-60 centigrade
- The response time: ≤ 5S
- Stability time: ≤ 60S
- Power consumption: ≤ 0.5W
SKU: PGI-00303080 -
Lithium ION (Li-Ion) Batteries
Lithium Ion Ebike 3P7S 7.8AH 24V Battery
Ask for Latest offers/availability : https://bit.ly/3hNamSz
- Battery Capacity: 7.8Ah
- Output Voltage: 24VDC
- USB charging port: can use as 5V 2A-3A gadgets charger.
- With aluminum alloy waterproof case.
- High-quality alloy mounted lower reed pipe rack.
- Semi-hidden battery installation.
- Easy locking and Unlocking for replacement
SKU: PGI-00620085 -
-
-
IC's
LM2596T-5 – 3A – 5V step down regulator (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3946fOa
- Step Down Regulator Capable of Delivering 3A
- Wide Input Range up to 40V
- Excellent Line and Load Regulation
- 150 kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability
SKU: n/a -
IC's
LM324 – Low Power Quad Op-Amp (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/3sWJQKC
- In the linear mode the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.
- The unity gain cross frequency is temperature compensated.
- The input bias current is also temperature compensated Advantages.
- Eliminates need for dual supplies.
- Four internally compensated op amps in a single package.
- Allows directly sensing near GND and VOUT also goes to GND.
- Compatible with all forms of logic.
- Power drain suitable for battery operation.
SKU: n/a -
-
