Shop
Showing 1009–1032 of 1946 results
-
Motor Driver
Kangaroo X2 Motion Controller
Ask for Latest offers/availability : https://bit.ly/3k24YwA
- Model: Kangaroo x2
- 2 channel self-tuning PID controller
- Position or speed control
- Quadrature encoder feedback or potentiometer feedback
- Support for limit switches and mechanical stops
- Analog, R/C, and serial inputs
SKU: PGI-0015839 -
-
-
-
Flight Controller & Accessories
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Flight Controller & AccessoriesKK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Ask for Latest offer / Availability : https://bit.ly/3v6MSg6
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU InvenSense Inc.
- INPUT VOLTAGE: 4.8V-6.0V.
- AVR INTERFACE: Standard 6 Pin.
- SIGNAL FROM RECEIVER: 1520us(5 channels).
- SIGNAL TO ESC: 1520us.
SKU: PGI-003106 -
-
Tyres & Wheels
L Clamp for side shaft Johnson gear motor
- Material: 1.5 mm thick MS steel
- Size: Motor mounting side: Height 40 mm, Width 40 mm;
- Bracket mounting side: Height 22 mm, Width 40 mm
- A hole for Motor mounting: 26 mm diameter(M3.3 ).
- Holes for Bracket mounting: Six holes of 3mm.
- Weight: 20 gm
SKU: n/a -
IC's
L293D – H-Bridge Motor Driver (pack of 5 )
Ask for Latest offer / Availability : https://bit.ly/3c5BzxN
- The Device is a monolithic integrated high voltage.
- high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads.
- switching power transistors.
- allowing operation at a lower voltage and internal clamp diodes are included.
SKU: n/a -
IC's
L293D DIP Motor Driver IC (pack of 10 )
Ask for Latest offer / Availability : https://bit.ly/3qDX2lB
- Wide range of supply voltage from 4.5 to 36v
- Separate Input Logic Supply can be provided
- Output Current per channel 1A for L293 and 600mA for L293D
- Peak Current per channel 2A for L293 and 1.2A for L293D
- Output Clamp diodes are provided to drive inductive loads in L293D.
- Automatic Thermal Shutdown
SKU: n/a -
Electronic Components & IC's
L293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
Electronic Components & IC'sL293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
- This is most commonly used driver circuit in robots.
- DC and Stepper motors for micro mouse, line following robots, robot arms Features.
- motor supply current: 600 mA per motor.
- The driver two holes of for easy mounting.
SKU: n/a -
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog Blaster
L293D Motor Driver/Servo Shield for Arduino
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog BlasterL293D Motor Driver/Servo Shield for Arduino
Ask for Latest offers/availability : https://bit.ly/3FBPqs6
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: PGI-009736 -
-
Motors | Drivers | Actuators Categories, Prayog Blaster
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Motors | Drivers | Actuators Categories, Prayog BlasterL298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Ask for Latest offers/availability : https://bit.ly/3kT4uaR
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
SKU: PGI-0051971 -
Wireless Smart Switch
L701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch
Wireless Smart SwitchL701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch
Ask for latest offers/availability : https://bit.ly/3b4pTqO
- 100% brand new and high quality.
- Widely used in street lights, neon lights, bells, radio and television equipment, production equipment, electrical equipment and household appliances automatic control.
- Built-in high-performance batteries as backup power in case of no electricity can still maintain time display and storage of.
- Auto timer error correction. (with an electron)
- Repeat programs with 16 on/off setting.
- Digital electronics general purpose time switch daily and programs.
SKU: n/a -
IC's
L78M09CV (L7809CV) TO-220 Linear Voltage Regulator
Ask for Latest offer / Availability : https://bit.ly/3C0akzs
- Fixed output voltage is 9V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
SKU: PGI-00293 -
Temperature and Humidity Sensor
LCD Electronic Fish Tank Water Detector Thermometer
Ask for latest offers/availability : https://bit.ly/2VTeXH3
- Temperature range: -50°C ~ +110°C
- Temperature display resolution: ±0.1
- temperature measurement accuracy: 1°C
- Cable Length: 1M
- Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
- Easy to use, small and handy module.
- The module is powered by a pair of LR44 button batteries (battery included)
SKU: PGI-0043822 -
Arduino Sensors
LDR Light Sensitive Resistor for Light Sensor (5 mm)
- The maximum voltage (V-dc): 150
- The maximum power dissipation (mW): 100
- Ambient temperature (° C): – 30 — +70
- Spectral peak (nm): 540
- Light resistance (10Lux) (KΩ): 2-5
- Dark resistance (MΩ):0.2
- Photoresistor is widely used in toys, lamps, cameras and other industries.
SKU: n/a -
Motor Driver
Leadshine DM542 Digital Stepper Motor Driver
Ask for Latest offers/availability : https://bit.ly/3tvE2IJ
- Power supply: DC 24-60 (V)
- Current maximum: 4.5A
- Output phase current:1 .5A-4.5A
- Logic input current: 1 0-20mA
- Optical isolation signal input
- Output current DIP switch is adjustable
SKU: PGI-001165428 -
Motor Driver
Leadshine DM556 Digital Stepper Motor Driver
Ask for Latest offers/availability : https://bit.ly/308ZB3V
- Maximum current: 7.2A, resolution: 0.1A
- Subdivision range: 400~25600ppr
- Impulse response frequency: 200KHz
- DC power supply
- The input voltage range: 24~80VDC or AC both OK;
- Power supply is greater than 200W. Recommend 48VDC or 48V AC
- Operating Temperature: -10℃~45℃
SKU: PGI-001150743 -
-
IC's
LF351 BiFET Op-Amp (JFET input op-amp)
Ask for Latest offer / Availability : https://bit.ly/3iDXspo
- Low Input Bias Current: 50 pA
- Low Input Noise Voltage: 16 nV/ Hz
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13V/µs
- Low Supply Current: 1.8 mA per Amplifier
- High Input Impedance: 1012 Ω
- High Common Mode and Supply Voltage Rejection Ratios: 100 dB
SKU: n/a
