Shop
Showing 793–816 of 1946 resultsSorted by latest
-
Current and Voltage Sensor
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
Ask for latest offers/availability : https://bit.ly/3aw4l6h
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: PGI-00559742 -
Current and Voltage Sensor
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
Current and Voltage SensorCJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
Ask for latest offers/availability : https://bit.ly/2VSsP4t
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
SKU: PGI-00421237 -
Current and Voltage Sensor
Current and Voltage Detection Module Arduino Compatible
Ask for latest offers/availability : https://bit.ly/3cKcRjw
- Test Voltage range: DC3 – 25V (for Arduino work on 5V) or DC3 – 16.5V (for Arduino work on 3.3V)
- Test Current range: DC0 – 3A PCB
- Size (LxWxH)mm : 22 x 21 x 7
SKU: PGI-00396910 -
Current and Voltage Sensor
SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Current and Voltage SensorSCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor
Ask for latest offers/availability : https://bit.ly/2S5A5sz
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: PGI-0043399 -
Current and Voltage Sensor
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
Ask for latest offers/availability : https://bit.ly/2VAndNj
- Input Current : 0-30A
- Output Mode: 0-1V @ 30mA
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: PGI-0028668 -
Current and Voltage Sensor
SCT-013-060 Non-invasive AC Current Sensor Clamp Sensor 60A
Ask for latest offers/availability : https://bit.ly/3cGGfqY
- Input current (RMS): 60A.
- Max current: 75A.
- Work temperature: -25℃～+70℃.
- Storage temperature: -30℃～+90℃.
- Work voltage: 660V.
- Frequency range: 50Hz-1KHz.
- Dielectric strength: 3.5KV 50Hz 1min
SKU: PGI-00618494 -
Current and Voltage Sensor
SparkFun Current Sensor Breakout – ACS723
Ask for latest offers/availability : https://bit.ly/2x1tkka
- Analog output with bandwidth adjustable to 80kHz.
- Measures DC and AC currents up to 10 mA ~ 5A.
- Full electrical isolation of measured and sensed circuits.
- The version without the op-amp has a base sensitivity of 400mV/A.
SKU: PGI-00637309 -
-
-
-
Rotary Encoder
Speed Measuring Sensor Groove Coupler Module For Arduino
Ask for latest offers/availability : https://bit.ly/2VR7ZlW
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
SKU: PGI-0044101 -
Biometric/ECG/EMG/Sensor
Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes
Ask for latest offers/availability : https://bit.ly/2Y1cUDp
- The diameter of the Electrode Pad: 52 mm
- Cable Length: 2 feet
- Weight: 30gm.
- Improved adjustable gain (more rugged)
- Onboard port for our new cables
- Connects to the board straight out of the box
- The reduced voltage needed (+-3.5V)
SKU: PGI-00261834 -
Biometric/ECG/EMG/Sensor
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
Biometric/ECG/EMG/SensorAnti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
Ask for latest offers/availability : https://bit.ly/2XXnZFK
- Adjustable wrist strap with alligator clip tip.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane-Coated Coil Cords.
- High-Quality Strain relief.
- The soft elastic band comfort.
- Rinsing Resisting.
SKU: n/a -
Biometric/ECG/EMG/Sensor
GT511C3 Optical Fingerprint Scanner Module with cable
Ask for latest offers/availability : https://bit.ly/350y3iK
- Finger window: 16.5 x 12.5 mm.
- Image Size: 202 x 258 Pixels.
- Storage capacity: 200 fingerprints.
- Resolution: 450 dpi.
- CPU: ARM Cortex M3 Core MCU).
- Size of Template: 496 Byte(Template) + 2 Byte(Template).
SKU: PGI-0023450 -
-
Biometric/ECG/EMG/Sensor
MAX30100 Pulse Oximeter Heart Rate Sensor Module
Ask for latest offers/availability : https://bit.ly/3eIZamQ
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and
- high-performance analog front
- Ultra low power operation increases battery life for wearable devices
SKU: PGI-00417371 -
Biometric/ECG/EMG/Sensor
R305 Fingerprint Identification Module Fingerprint Lock Optical Development Board
Biometric/ECG/EMG/SensorR305 Fingerprint Identification Module Fingerprint Lock Optical Development Board
Ask for latest offers/availability : https://bit.ly/3cFnIex
- Integrated image collecting and algorithm chip together, ALL-in-One.
- The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing techniques.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
- Comes with Matching mode (1: 1) and Search mode (1: N)
SKU: PGI-0031272 -
Biometric/ECG/EMG/Sensor
SeeedStudio Grove Capacitive Fingerprint Scanner
Ask for latest offers/availability : https://bit.ly/2Kv9sZQ
- Built-in 2KByte storage: support up to 100 fingerprints
- Powerful self-learning function: the more you use, the more accurate the recognition
- Selectable security level
- Small size, low power consumption,10uA for standby mode
SKU: PGI-00672601 -
Biometric/ECG/EMG/Sensor
SHIELD-EKG-EMG-PASSIVE
Ask for latest offers/availability : https://bit.ly/3bAE5Je
- The Olimex Shield-EKG-EMG-PA passive electrode pack has three electrodes suitable for use with the EKG/EMG shield (73-0274) labeled right arm, left arm and DRL. DRL stands for Driven Right Leg and it is used to improve common mode rejection.
SKU: PGI-006327 -
Biometric/ECG/EMG/Sensor
ECG GEL ELECTRODE (3M) Pack of 5
Ask for latest offers/availability : https://bit.ly/2VtG3Wm
- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: PGI-006326 -
-
Rfid Card, Tags & Readers
125KHz RFID Card – 5Pcs.
Ask for latest offers/availability : https://bit.ly/2VVGl7i
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
- Operating frequency: 125KHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
SKU: PGI-31353 -
Rfid Card, Tags & Readers
125KHz RFID Tag – 5pcs
Ask for latest offers/availability : https://bit.ly/3cIyCjW
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: PGI-0031356
