Shop
Showing 601–624 of 1946 resultsSorted by latest
-
IR and RF Transmitter and Receivers
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
Ask for latest offers/availability : https://bit.ly/2YuGn9e
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
SKU: n/a -
-
IR and RF Transmitter and Receivers
RF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
IR and RF Transmitter and ReceiversRF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
Ask for latest offers/availability : https://bit.ly/2Yw4Nz7
- This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly! Connect the transmitter to your Arduino, Raspberry Pi or other microcontroller and the receiver to whatever you’d like to control.
SKU: n/a -
IR and RF Transmitter and Receivers
RFM69HCW Wireless Receiving Module-434 MHz
Ask for latest offers/availability : https://bit.ly/2ypOidi
- RFM69 series wireless communication module is designed to work at 434Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics
SKU: PGI-00223521 -
IR and RF Transmitter and Receivers
RFM69HCW Wireless Receiving Module-915 MHz
Ask for latest offers/availability : https://bit.ly/3fksgcm
- RFM69 series wireless communication module is designed to work at 965Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics.
SKU: n/a -
IR and RF Transmitter and Receivers
RXB6 433Mhz Superheterodyne Wireless Receiver Module
Ask for latest offers/availability : https://bit.ly/2WqvJgV
- Power supply voltage input range: 3V-5.5V;
- Low power consumption, 3.3V @ 433.92MHz, 6.0mA
- Power Enable mode power consumption can be done lowest 50nA;
- has an analog RSSI signal strength level output;
- Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification;
SKU: n/a -
Gsm/Gprs
2.4GHz 3.2dBi RP-SMA Male Omni Antenna for WiFi
Ask for latest offers/availability : https://bit.ly/2SOXUFF
- 2.4GHz applications
- 3.2dBi gain
- Antenna Connector: RP-SMA Male.
- 360º Rotation and tilt capabilities
- Omni-directional radiation.
- Antenna Type: Whip, Tilt.
- Max Height of Antenna: 19 cm
SKU: n/a -
Gsm/Gprs
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
Ask for latest offers/availability : https://bit.ly/2KXYlZM
- This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
Gsm/Gprs
GSM SIM800C Modem shield for arduino with Antenna
Ask for latest offers/availability : https://bit.ly/2xtT350
- The Modem is built with Quad-Band GSM/GPRS engine-SIM800C from SIMCOM, works on frequencies 850/ 900/ 1800/ 1900 MHz. The Modem is populated with DB9 Female connector so as to directly connect with computer or other RS232 Compatible devices.
SKU: n/a -
Gsm/Gprs
SAM Head Sucker Antenna for SIM900A SIM908 Development Board dedicated Antenna
Ask for latest offers/availability : https://bit.ly/3flVKaa
- Frequency range: 800MHz, 900MHz, 1200MHz, 1500MHz, 1800MHz, 1900MHz.
- gain : 7 (dB).
- The antenna height (mm):90
- Cable Length:2 Meter
- Connector Type:SMA(male)
- Standing wave ratio: ≤1.5
- Input impedance: 50 Ω
SKU: n/a -
Gsm/Gprs
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board
Ask for latest offers/availability : https://bit.ly/3ffVnO9
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: n/a -
Gsm/Gprs
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
Ask for latest offers/availability : https://bit.ly/35vJtLO
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: n/a -
-
Gsm/Gprs
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
Ask for latest offers/availability : https://bit.ly/2z7ibPw
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: n/a -
Gsm/Gprs
SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
Ask for latest offers/availability : https://bit.ly/3b5fE5z
- Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- the small size is suitable for all kinds of sleeve belt type and embedded.
- Power supply: 5 -20 V.
- Power Interface: 2.54 mm Pin header or MICRO USB interface.
SKU: n/a -
Gsm/Gprs
SIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Gsm/GprsSIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Ask for latest offers/availability : https://bit.ly/3fecIHb
- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
SKU: n/a -
-
-
BLUETOOTH
HC-05 6pin Bluetooth Module with Button
Ask for latest offers/availability : https://bit.ly/2W1eNPc
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: PGI-00485216 -
BLUETOOTH
HC-05 Wireless Bluetooth Module without Base Plate
Ask for latest offers/availability : https://bit.ly/2Wswnum
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: PGI-00617827 -
BLUETOOTH
HC-06 4pin Bluetooth Module (Slave) No Button
Ask for latest offers/availability : https://bit.ly/2zW1c3c
- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SKU: PGI-00617844 -
BLUETOOTH
HC-06 6pin Bluetooth Module without Button
Ask for latest offers/availability : https://bit.ly/2Ws12s1
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
SKU: PGI-00617857 -
BLUETOOTH
HC-42 6pin Bluetooth 5.0BLE Serial Port Module
Ask for latest offers/availability : https://bit.ly/3bVymOl
- Frequency Band: 2.4G.
- Air Rate: 1Mbps/2Mbps.
- Working Voltage: 1.8~3.6V.
- Antenna: PCB internal antenna.
- Shutdown Current: 0.3μA.
- Working Temperature: -25℃~+75℃.
- Reference Distance: 40m/2Mbps.
SKU: PGI-00456160 -
BLUETOOTH
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
Ask for latest offers/availability : https://bit.ly/2VUvlYZ
- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: PGI-0051733
