Shop
Showing 529–552 of 1946 resultsSorted by price: high to low
-
Quad Copter & Multi Rotors
Z25 CNC Aluminum Folding Arm Tube Joint
Ask for Latest offers/availability : https://bit.ly/3ag2q8i
- Outer Diameter: 28 mm
- Inner Diameter: 25 ±3 mm(With adjustment screws)
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 84 gm
SKU: PGI-0045572 -
-
-
Camera, Fpv Camera
1000TVL CMOS 3.6mm Lens FPV Mini Camera
Ask for Latest offers/availability : https://bit.ly/38ctEfs
- SENSOR: CMOS
- 3.6mm lens
- Power supply: 12V DC
- Signal system: PAL/NTSC
- Min. Illumination 0.3 Lux / F1.2
- S/N Ratio More than 48dB
- White Balance Auto
- AGC Auto
- Color/Black and White Auto
SKU: PGI-0029756 -
Single Board Computer
Orange Pi One
Ask For Availability :- https://bit.ly/32DadZk
What’s Orange Pi One？ It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the banana pi Image. It uses the AllWinner H3 SoC, and has 512MB DDR3 SDRAM …
SKU: n/a -
-
STEPPER MOTOR AND DRIVERS
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
STEPPER MOTOR AND DRIVERSTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Ask for Latest offers/availability : https://bit.ly/3CZIC67
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: PGI-00835839 -
-
WIRELESS REMOTE CONTROLLER
Cytron Arduino PS2 Shield
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: n/a -
Motors | Drivers | Actuators Categories
Orange Planetary Gear DC Motor 12V 427 RPM 1.27 Kg-CM PG28M395-11.2K
Motors | Drivers | Actuators CategoriesOrange Planetary Gear DC Motor 12V 427 RPM 1.27 Kg-CM PG28M395-11.2K
Ask for Latest offer / Availability : https://bit.ly/3FwnFky
- Model: PG28M395-11.2K
- Operating Voltage: 12V DC
- Rated Torque: 1.27 KgCm
- Rated Speed: 427 RPM
- Rated Current: 1.11 A
- Rated Power: 13.51W
- Gear Ratio: 11.2 : 1
SKU: n/a -
Chargers
SKYRC E3 AC 2S~3S Li-Po Battery Balance Charger (V2) (Original)
Ask for Latest offer / Availability : https://bit.ly/3sJowrJ
- Version 2.0.
- Input: AC 110V-240V AC.
- Dimension approx: 88 X 57 X 35mm.
- Cell count range: 1-3 cells.
- Max Charge Current: 1.5A.
- Operational mode display: via 3 Leds
SKU: PGI-004511 -
-
Water Flow And Level Sensor
Optical Liquid Level Sensor
Ask for latest offers/availability : https://bit.ly/2KzQ7ab
- Measuring accuracy: 1MM
- Current output :15mA
- Operating voltage: 5v
- No mechanical moving parts, high reliability
- High precision level control
- Meet the safety standard requirements
- An easily mounting method with locking nut.
SKU: PGI-00355146 -
SERVO MOTORS AND ACCESSORIES
Emax ES3054 30 N-cm 23T Metal Gear Digital Servo ES3154 upgrade
Ask for Latest offers/availability : https://bit.ly/2WYaYgW
- Input voltage (V): 4.8 ~ 6.
- Degree of rotation: 180°.
- Stall Torque at 4.8V: 30 N-cm
- Operating Speed at 4.8V: 0.15 sec/60° at no load
- Stall Torque at 6.0V: 35 N-cm
- Operating Speed at 6.0V: 0.13 sec/60° at no load
SKU: PGI-00596572 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Yellow
Ask for Latest offers/availability : https://bit.ly/3m48jen
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316758 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Skin Colour
Ask for Latest offers/availability : https://bit.ly/3EUfrT2
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316794 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
Ask for Latest offers/availability : https://bit.ly/2Wk7hC6
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316774 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
Ask for Latest offers/availability : https://bit.ly/3CPmQ4m
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316752 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Purple
Ask for Latest offers/availability : https://bit.ly/2XVIa9B
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316782 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Pink
Ask for Latest offers/availability : https://bit.ly/3F5OWdF
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316770 -
3D Accessories
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
Ask for Latest offers/availability : https://bit.ly/2XUZM4I
- onsistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316766 -
3D Accessories, Filaments
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Grey
Ask for Latest offers/availability : https://bit.ly/2Y59e6f
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
SKU: PGI-00316778
