IoT and Wireless
Showing 49–72 of 114 results
-
BLUETOOTH
HC-05 6pin Bluetooth Module with Button
Ask for latest offers/availability : https://bit.ly/2W1eNPc
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: PGI-00485216 -
BLUETOOTH
HC-05 Wireless Bluetooth Module without Base Plate
Ask for latest offers/availability : https://bit.ly/2Wswnum
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: PGI-00617827 -
BLUETOOTH
HC-06 4pin Bluetooth Module (Slave) No Button
Ask for latest offers/availability : https://bit.ly/2zW1c3c
- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SKU: PGI-00617844 -
BLUETOOTH
HC-06 6pin Bluetooth Module without Button
Ask for latest offers/availability : https://bit.ly/2Ws12s1
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
SKU: PGI-00617857 -
IR and RF Transmitter and Receivers
HC-11 CC1101 433MHz Wireless Transceiver RF Serial UART Module
Ask for latest offers/availability : https://bit.ly/35rGrrO
- 433MHz operation
- Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA).
- 10dBm output power and high sensitivity providing long range in the open environment.
- 3V-6V operating voltage.
- Serial pass-through mode to replace the serial cable (half duplex).
- IO pass-through modes.
SKU: n/a -
BLUETOOTH
HC-42 6pin Bluetooth 5.0BLE Serial Port Module
Ask for latest offers/availability : https://bit.ly/3bVymOl
- Frequency Band: 2.4G.
- Air Rate: 1Mbps/2Mbps.
- Working Voltage: 1.8~3.6V.
- Antenna: PCB internal antenna.
- Shutdown Current: 0.3μA.
- Working Temperature: -25℃~+75℃.
- Reference Distance: 40m/2Mbps.
SKU: PGI-00456160 -
BLUETOOTH
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
Ask for latest offers/availability : https://bit.ly/2VUvlYZ
- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: PGI-0051733 -
IR and RF Transmitter and Receivers
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For arduino
IR and RF Transmitter and ReceiversHX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For arduino
Ask for latest offers/availability : https://bit.ly/2W59NcB
- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
SKU: n/a -
IR and RF Transmitter and Receivers
Infrared IR Wireless Remote Control Module Kit for Arduino
Ask for latest offers/availability : https://bit.ly/3c407nU
- Battery: CR2025 160mAh button battery
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Effective life: 20,000 times
- Static current: 3uA – 5uA
- Dynamic current: 3mA – 5mA
SKU: n/a -
IoT and Wireless
Intel Movidius Neural Compute Stick 2
Intel Corporation introduces the Intel Neural Compute Stick 2 on Nov. 14, 2018, at Intel AI Devcon in Beijing. Designed to build smarter AI algorithms and for prototyping computer vision at the network edge, the Intel Neural Compute Stick 2 enables deep neural network testing, tuning and prototyping, so developers can go from prototyping into production. (Credit: Intel Corporation).
SKU: n/a -
IoT and Wireless
Intel-AAEON-UP-Board
- Compatible with most of Raspberry Pi HAT
- Quad-Core Intel CPU and Graphics performance
- Developer Community Support (www.up-community.org)
- Rich Linux support (Debian-Ubilinux, Ubuntu, yoctoLinux)
- Windows 10 Support
- Ubiworx IoT framework with Cloud service
- Scalable IO module integration
SKU: n/a -
IR and RF Transmitter and Receivers
IR Remote Control with Battery
Ask for latest offers/availability : https://bit.ly/2WjJTR6
- Remote control distance: more than 8 meters
- Crystal: the oscillation frequency of 455
- IR carrier frequency: 38KHz
- Output form: Digital
- Power Supply: CR2050 Battery
- Pointing Angle: up to 60º
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000 click
SKU: n/a -
Wireless Smart Switch
L701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch
Wireless Smart SwitchL701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch
Ask for latest offers/availability : https://bit.ly/3b4pTqO
- 100% brand new and high quality.
- Widely used in street lights, neon lights, bells, radio and television equipment, production equipment, electrical equipment and household appliances automatic control.
- Built-in high-performance batteries as backup power in case of no electricity can still maintain time display and storage of.
- Auto timer error correction. (with an electron)
- Repeat programs with 16 on/off setting.
- Digital electronics general purpose time switch daily and programs.
SKU: n/a -
Lora Wifi
LoRa Shield for Arduino V95
Ask for latest offers/availability : https://bit.ly/2WvBoTh
- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in a factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega, DUE
- External Antenna via I-Pex connector
SKU: n/a -
IR and RF Transmitter and Receivers
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
Ask for latest offers/availability : https://bit.ly/2YuGn9e
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
SKU: n/a -
Advance Controller Board
Matrix Creator IoT Development Board
Ask for latest offers/availability : https://bit.ly/3ceWvQp
- Microcontroller – Atmel Cortex-M3 ATSAM3S2
- FPGA – Xilinx Spartan 6 XC6SLX4
- 8 MEMS Microphone Array (DIY Amazon Echo)
- 3D Magnetometer
- Ultraviolet sensor
- Pressure sensor
SKU: PGI-00712427 -
Advance Controller Board
Matrix Voice IoT Development Platform with ESP32 Wireless Module
Ask for latest offers/availability : https://bit.ly/3dfNMxa
- Xilinx Spartan 6 XC6SLX9 FPGA
- 7 x MEMSMP34DB02 audio sensor digital microphone array
- 18 x RGBW LEDs
- 64MByte 132MHZ SDRAM
- 64Mbit Flash Memory
- Wifi 2.4Ghz 802.11bgn – BT 4.0 LE
- Tensilica Xtensa dual-core 32-bit LX6 microcontroller
SKU: n/a -
Wireless Smart Switch
Microcomputer DC 24 V LCD Digital Display Programmable Electronic Timer Switch
Ask for latest offers/availability : https://bit.ly/3bYdpT3
- Widely used in street lights, neon lights, bells, radio and television equipment, production equipment, electrical equipment, and household appliances automatic control.
- Built-in high-performance batteries as backup power in case of no electricity can still maintain time display and storage.
- Auto timer error correction. (with an electron).
- Repeat programs with 16 on/off setting.
- Digital electronics general purpose time switch daily and programs.
SKU: n/a -
Advance Controller Board
Microsoft’s Azure Sphere MT3620 Starter Kit
Ask for latest offers/availability : https://bit.ly/2YvRkqX
- On-board environmental sensors for light, temperature, and barometric pressure
- Interface for optional OLED 128×64 display
- USB Interface for power and data with a host computer
- User pushbutton switches and LEDs
- 5V to 3.3V power regulation
- Terminal footprints for external 5V DC and VBAT supplies
SKU: n/a -
Artificial Intelligence
Mini Ultra-Small size ESP-M3 Serial Wireless WiFi Transmission Module Fully Compatible with ESP8266
Artificial IntelligenceMini Ultra-Small size ESP-M3 Serial Wireless WiFi Transmission Module Fully Compatible with ESP8266
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
SKU: n/a -
Esp Wifi Module, IoT and Wireless
MT76813DBI ESP8266 Serial WIFI wireless Gain Antenna
Ask for Latest offer / Availability : https://bit.ly/3kX0yFZ
- Radome material: polyurethane
- Flexible cable
- Stable signal
- Best for indoor applications.
- Connector: IPX female to SMA-KY
- Frequency(Hz): 900/1800
- Gain: <3 dB
- VSWR: <1.5
SKU: PGI-0052699 -
Advance Controller Board
NANO32 ESP32 IoT Development Board
Ask for latest offers/availability : https://bit.ly/35tIThq
- ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -
Esp Wifi Module
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
Ask for latest offers/availability : https://bit.ly/35drU2S
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a
