Regular Product
Showing 289–312 of 388 results
-
IC's
NE5532 – Dual Low Noise Operational Amplifiers (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qN910h
- Equivalent Input Noise Voltage: 5 nV/√Hz Typ at 1 kHz
- Unity-Gain Bandwidth: 10 MHz Typ
- Common-Mode Rejection Ratio: 100 dB Typ
- High DC Voltage Gain: 100 V/mV Typ
- Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω
- High Slew Rate: 9 V/µs Typ
SKU: n/a -
IC's
NE555 Timer IC (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/3sKwRvf
- Timing From Microseconds to Hours
- Astable or Monostable Operation
- Adjustable Duty Cycle
- TTL-Compatible Output Can Sink or Source
Up to 200 mA - On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
SKU: n/a -
3D Accessories, Prayog Blaster
NEMA17 4.2 kg-cm Stepper Motor (With Detachable 70 cm Cable)
Ask for Latest offer / Availability : https://bit.ly/3bQHjev
-
- Step Angle: 1.8 °
- Current: 1.2 A/Phase
- Holding Torque: 4.2 kg-cm
- Detent torque: 2.2 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 5 mm
SKU: PG-0051732 -
-
Electronic Components & IC's, Mechanical, Prayog Blaster
Noel 25W 230V Sodering Iron Model-GOLD
Ask for Latest offer / Availability : https://bit.ly/3uyIwOB
- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
SKU: PGI-00170854 -
Arduino Modules
Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
Arduino ModulesNon-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
Ask for Latest offer / Availability : https://bit.ly/3IzalNL
- Support MP3 format, playing power on automatically.
- When mp3 is played the red LED flashes.
- Support U disk (test 32G), TF Card (test 16G) play mode; power on default.
- Buttons can be adjusted up and down to control songs, volume up and down, pause or play, mode switching.
- Press menu button enter the single / all song play mode.
SKU: PGI-0052280 -
Official Raspberry Pi Accessories
Official Raspberry Pi 3 Case of Raspberry Pi 3 Model B and B+ (Red-White)
Official Raspberry Pi AccessoriesOfficial Raspberry Pi 3 Case of Raspberry Pi 3 Model B and B+ (Red-White)
Ask for Latest offers/availability : https://bit.ly/3cpYTEV
- High-quality ABS construction
- Available in both red/white and black/grey
- Removable side panels and lid for easy access to GPIO, camera and display connectors
- Light pipes for power and activity LEDs
- Extraordinarily handsome
SKU: PGI-00128303 -
Raspberry Pi Camera
Official Raspberry Pi Camera V2
Ask for Latest offers/availability : https://bit.ly/3klNKKC
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
SKU: PGI-00128023 -
3D Accessories
Openpilot MINI CC3D Atom NANO CC3D Side Pin Flight Controller for FPV QAV250
Ask for Latest offers/availability : https://bit.ly/39KZpMR
This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality. Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!
SKU: PG676 -
-
IC's
PC817 – High Density Photocoupler (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/3iyDGLU
- Computer terminals
- System appliances, measuing instruments
- Registers, copiers, automatic Vending machines
- Electric home appliances, such as fan heater, etc.
- Signal transmission between circuits of different potentials and impedances
SKU: n/a -
IC's
PIC16F72 Flash 28-pin 2kB Microcontroller with A/D (pack of 3)
Ask for Latest offer / Availability : https://bit.ly/3p8y0uw
- 28-pin Low Power Microcontroller
- Flash Program Memory: 2048 bytes
- SRAM Data Memory: 128 bytes
- I/O Pins: 22
- Timers: Two 8-bit / One 16-bit
- A/D Converter: 8-bit Five Channel
- PWM: 10-bit
- SSP: SPI and I²C Support
- External Oscillator: up to 20MHz
SKU: n/a -
-
Arduino Modules
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Adopt imported controller PL2303HX,which can stabilize the flash with high speed
- 500mA self recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
- The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
- so that the board won’t burnt down by material short cut.
- Electrostatic package,insures the board will not be damaged before use
Support WIN7 system
SKU: PGI-0044534 -
Raspberry Pi Accessories
PN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Raspberry Pi AccessoriesPN532 NFC RFID module V3, NFC Android phone extension of RFID arduino raspberry
Ask for Latest offer / Availability : https://bit.ly/39i11gN
- Small size, it is easy to embed into your designs
- Support for I2C, SPI, HSU (high-speed UART), you can easily switch between these communications, you can easily switch the communication through the lower left corner of the board toggle switch, detailed operation method can refer to the product manual
- Work in NFC Mode or RFID reader / writer Mode
- Mifare 1k, 4k, Ultralight, and DesFire card
- ISO / IEC 14443-4 cards, such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards, such as IRT5001 card
- FeliCa cards, such as RCS_860 and RCS_854
- Plug and Play compatible.
SKU: PGI-00699611 -
Raspberry Pi Accessories
PN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Raspberry Pi AccessoriesPN532-NFC-Near-Field-Communication-RFID-V3-Module-for-Arduino-Raspberry-Pi-DIY
Ask for Latest offer / Availability : https://bit.ly/3kdcBQB
- Small dimension and easy to embed into your project
- Support I2C, SPI and HSU (High Speed UART), easy to change between those modes
- Support RFID reading and writing, P2P communication with peers, NFC with Android phone
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Up to 5cm~7cm reading distance
- On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Arduino compatible, plug in and play with our shield
SKU: n/a -
Hardware & Tools, Prayog Blaster
Precision Screw Driver Set
Ask for Latest offers/availability : https://bit.ly/3crmXXZ
- The product contains six different blades.
- Blades made from High Grade Alloy Steel .
- Scientifically hardened blades .
- Fully insulated grip handles with crown at the top .
SKU: PGI-001067312 -
-
Arduino Boards
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM ports: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceivers: RX / TX.
SKU: PGI-00409791 -
-
Prayog Blaster, Tyres & Wheels
Pure rubber robot wheel Best for Robo Fighting – 6mm shaft
Ask for Latest offers/availability : https://bit.ly/3ctKBn3
- Easy to assemble and disassemble.
- Easy to improve the design with more flexibility.
- The design is Durable.
- Wide space to mount many robotic components.
- Lightweight Design.
SKU: PGI-0077 -
Educational Science Toys, Prayog Blaster
R/C Intelligent Variety Blocks 4 in 1 Model (R721)
Ask for Latest offers/availability : https://bit.ly/3vksR6b
Variety Models: 4 Models meet your child’s different interests. Six Legs Bug Robot, Knight Robot, Tank Robot and Tank Robot. Function: Go forward/backward, turn left/right, Can use blocks to build 4 different styles of robot. Total 237 pcs of blocks.
SKU: R721
