Shop
Showing 1897–1920 of 1946 results
-
Electronic Components & IC's
XBee Pro S2C 63mW 802.15.4 Module without Antenna
Ask for Latest offer / Availability : https://bit.ly/2KbdnuA
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: n/a -
Xbee Zigbee Module
XBee USB adapter (CP2102)
Ask for latest offers/availability : https://bit.ly/2KMUZbZ
- Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
- The built-in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter (easy to interface 5V Devices)
- Status LEDs ( RX,TX,RSSI,Power)
- Zig Bee Pins available at 2.54 mm berg strip
- All XBee pins are broken out.
- Reset button.
SKU: n/a -
Sensors
XBee USB Adapter FT232RL for Arduino with Cable
Ask for Latest offers/availability : https://bit.ly/3Dhfirj
- Microprocessor: FT232RL.
- Power supply: 3.3V and 5V DC.
- Interface: Mini-B USB, 2.54mm pitch pin header.
- Adapter socket: XBee compatible 2.0mm pitch female pin header.
- 3.3V and 5V IO compatible.
- USB 2.0 protocol.
- Easily connected to a PC via mini USB cable.
- XBee compatible 2.0mm pitch female pin header.
SKU: PGI-0051765 -
Audio Module
XD-21 LM358 Gain Amplification Module Operational Amplifier Module
Ask for latest offers/availability : https://bit.ly/2yuaPFZ
- LM358 chip onboard.
- 100 gain of the circuit design.
- 10K onboard adjustable resistance, you can adjust the magnification.
- Onboard power indicator.
- The chip has led major pin can be directly input and output signals.
SKU: n/a -
Circuit Board
XD-216 Screw shield Screw Shield V1 Expansion Board
Ask for Latest offer / Availability :https://bit.ly/36gpBxq
- Size: 29 x 71 mm
- Combines the function of Arduino Screw Shield and Sensor Shield.
- Expand all of IO interfaces from Arduino.
- 3-Pin male headers for easy sensor/servo connection.
- The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenien
SKU: PGI-0031175 -
-
-
Temperature and Humidity Sensor
XH-M452 Temperature and Humidity Controller Module
Ask for latest offers/availability : https://bit.ly/3aBf7bk
- Power supply: DC 12V
- Temperature measurement range:-40~120℃
- Humidity range：0~100%RH
- Control precision：0.1℃ 0.1%RH
- Test probe：Integrated sensor
SKU: PGI-00699634 -
Temperature and Humidity Sensor
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch
Ask for latest offers/availability : https://bit.ly/3cIzmp3
- Output type: AC Output (AC 220V 1500W).
- Temperature setting upper and lower limits.
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: 50~110°C.
- Temperature Control Range: 50~110°C.
- Control Accuracy: Upto 0.1℃.
SKU: PGI-00110283 -
Temperature and Humidity Sensor
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
Ask for latest offers/availability : https://bit.ly/2S1bPYM
- Easy to install
- Output type: Direct Output
- Output capacity: MAX 10Aemperature measurement, display; refrigeration, heating control
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Temperature Measuring Range: 50~110°C
- Temperature Control Range: 50~110°C
- Control Accuracy: Upto 0.1℃
SKU: PGI-0062448 -
Temperature and Humidity Sensor
XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch
Temperature and Humidity SensorXH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch
Ask for latest offers/availability : https://bit.ly/2VX6MJJ
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: 50~110°C
- Temperature control range: 50~110°C
- Control precision: upto 0.1°C
SKU: PGI-00611391 -
Circuit Board, Prayog Blaster
XL4005 DC-DC 5-32V Adjustable Step Down 5A Buck Power Supply Module
Ask for Latest offers/availability : https://bit.ly/2PxHvqd
- Input voltage range: 5V-32V DC
- Output voltage range: 0.8V-30V DC adjustable.
- Output current: 0-5A.
- High efficiency up to 96%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
SKU: PGI-00835849 -
Prayog Blaster, Robocon
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
Ask for Latest offers/availability : https://bit.ly/2PEgCRj
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Power indicator: Yes.
- Short circuit protection: Yes (limit current 8A).
- Over temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: PGI-0012258 -
Robocon
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Power indicator: Yes.
- Short circuit protection: Yes (limit current 8A).
- Over temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: n/a -
Electronic Components & IC's
XL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board
Electronic Components & IC'sXL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board
Ask for latest offers/availability : https://bit.ly/3110Ti4
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
SKU: n/a -
Electronic Components & IC's
XL6009 DC-DC Step-up Module with Adjustable Booster Power Supply Module
- Output mode: OUT + output level is, the OUT – output is negative
- Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
- Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)
SKU: PGI-0012282 -
-
Connectors
XT60 Series Adaptor Connection Plug – 1Pcs
Ask for Latest offer / Availability :https://bit.ly/2ShDkN8
- Designed for heavy duty
- High Power Application
- Connectors: 2 XT60 Male Connectors and 1 XT60 Female Connector
- Connector Type: XT60
- Material: High-Temp nylon
- Length: 42 mm
- Weight: 14 gm.
SKU: PGI-57748 -
Hardware & Tools
XT60 XT90 heat soldering station
Ask for Latest offer / Availability : https://bit.ly/3HFsYiR
- Added slot space for mini T plug.
- Several welding holes for banana plug added for convenient use.
- Thermal-protective coating added to prevent heat from dissipating.
- The slot space for T plug can be prolonged.
- Flexibly adjust the slot space for T plug with screws.
- Support plug type: T Plug/ XT60/ XT90/ min T/ 2-10 mm banana plug (12 kinds of specifications)
SKU: PGI-0029370 -
Power Connector
XT90 Female Connector with Housing-1pcs
- Contact Positions: 2
- Gender: Female
- Metal connector size: 4.5mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
SKU: n/a
