Shop
Showing 1273–1296 of 1946 resultsSorted by price: high to low
-
Relay
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
Ask for latest offers/availability : https://bit.ly/2ymC5pO
- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
SKU: PGI-0028487 -
-
Audio Module
TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module
Ask for latest offers/availability : https://bit.ly/3cZiqLH
- Working Voltage: DC 8-24V
- Power Output: 60W
- Applicable Speaker Impedance: 4-8 Ω
- Sound quality is very good by using this module.
- Mono digital audio power amplifier chip.
- High output and low power consumption.
SKU: n/a -
Microcontrollers
Atmega168A – 20PU Microcontroller
- High performance, low power Atmel® AVR® 8-bit microcontroller
- Advanced RISC architecture
- 131 powerful instructions – most single clock cycle execution
- 32 × 8 general purpose working registers
- Fully static operation
- Up to 20 MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
SKU: n/a -
Environmental Sensors
Metal detector non-contact metal induction detection module
Ask for Latest offer / Availability : https://bit.ly/3bGiVK2
- Operating voltage: 5V DC.
- Detector distance: 1CM.
- Adjust the potentiometer, let the modules work normally.
- Small and easy to use module.
- It comes with a Buzzer for metal detection indication.
SKU: PGI-0051860 -
Circuit Board
Data Logger module Logging Shield data Recorder Shield
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
SKU: PGI-0012191 -
Gsm/Gprs
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
Ask for latest offers/availability : https://bit.ly/2KXYlZM
- This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
-
Development Board
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
Ask for latest offers/availability : https://bit.ly/3w32Icc
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
SKU: PGI-003263 -
-
Water Flow And Level Sensor
P31 Small Float Level Control Switch Plastic Float Switch
Ask for latest offers/availability : https://bit.ly/3d0j77d
- Contact Rating: 10 W.
- Switching Voltage: 220 V.
- Switching Current: 0.5 A.
- Breakdown Voltage: 220 VDC.
- Carry Current: 1 A.
- Contact Resistance: 100 mΩ.
SKU: PGI-00610690 -
Thermoelectric Peltier Cooler
TEC1-12705 40x40mm Thermoelectric Cooler 5A Peltier Module
Ask for latest offers/availability : https://bit.ly/3eRJ0aK
- Model number: TEC1-12705
- Operating Voltage: 12V
- Maximum Voltage- Umax (V) : 15V
- Maximum Current- Imax (A) : 5.2A
- Maximum Power : 54 W
- Power Cord: 25cm
SKU: PGI-0043682 -
Microcontrollers
Atmega48PA – PU Microcontroller
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Advanced RISC Architecture
- 131 Powerful Instructions – Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Throughput at 20 MHz
- On-chip 2-cycle Multiplier
- • High Endurance Non-volatile Memory Segments – 4K Bytes of In-System Self-Programmable Flash progam memory
SKU: n/a -
Lipo Battery Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
Ask for Latest offer / Availability : https://bit.ly/3sneFYi
- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: PGI-00835784 -
Generic Ultrasonic Sensor
SeeedStudio Grove Ultrasonic Ranger
Ask for latest offers/availability : https://bit.ly/2xOponm
- Ultrasonic frequency: 40 kHz
- Accuracy: 2 mm
- Wide measurement range: 3 cm ~ 350 cm
- Wide voltage level: 3.2 V~5.2 V
- Operating current: 8 mA
- Only 3 pins needed, so saves I/O resources
- Output: PWM
SKU: PGI-00600693 -
Relay
Songle Single-channel 5V 30A Relay Module Power Failure Relay
Ask for latest offers/availability : https://bit.ly/2Leu0Gv
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
SKU: n/a -
Thermoelectric Peltier Cooler
SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
Thermoelectric Peltier CoolerSP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
Ask for latest offers/availability : https://bit.ly/2VDF2uZ
- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-150°C
- Maximum Temperature: 150°C
- Open Circuit Voltage: 4.8V
SKU: PGI-0026317 -
Hardware & Tools, Prayog Blaster
Soldering Iron Stand
Ask for Latest offers/availability : https://bit.ly/3qyWkW7
- Suitable for all soldering irons
- Solder iron holder keeps the iron away from flammable materials
- Detachable soldering iron Holder for easy storage
- Metal construction for long time use
- Upgrade soldering iron stand,can fixed on the desktop,easy to use and solve the shortage of soldering iron stand of weightlessness
SKU: PGI-0063
