Shop
Showing 1057–1080 of 1946 resultsSorted by latest
-
Motor Driver
Cytron Dual Channel Enhanced 10 Amp DC Motor Driver 30A Peak MDD10A
Ask for Latest offers/availability : https://bit.ly/3z0ppxZ
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: PGI-003405 -
-
Sensors
SmartElex RLS-08 Analog & Digital Line Sensor Array
Ask for Latest offers/availability : https://bit.ly/3kZOchR
- Operating voltage: 4.5V to 5.0 V
- Supply current: 150 mA
- Output format: 8 Analog and Digital voltages.
- Optimal sensing distance: 3 mm.
- Maximum recommended sensing distance: 6 mm
- Potentiometer to adjust the sensitivity of the individual sensors.
- Uses 8 sensors for best resolution
- Comes with easy to use digital outputs that can be connected directly to microcontrollers
SKU: PGI-0078725 -
SERVO MOTORS AND ACCESSORIES
Emax ES3054 30 N-cm 23T Metal Gear Digital Servo ES3154 upgrade
Ask for Latest offers/availability : https://bit.ly/2WYaYgW
- Input voltage (V): 4.8 ~ 6.
- Degree of rotation: 180°.
- Stall Torque at 4.8V: 30 N-cm
- Operating Speed at 4.8V: 0.15 sec/60° at no load
- Stall Torque at 6.0V: 35 N-cm
- Operating Speed at 6.0V: 0.13 sec/60° at no load
SKU: PGI-00596572 -
-
-
Development Board
Arduino Nano PRATHAM 1.0 Development Board
Ask for Latest offer / Availability : https://bit.ly/2VbMpcY
- On-board ON/OFF switch and power LED
- Onboard Voltage Regulator for stable power supply
- Arduino Nano compatible (direct plug-in for Arduino Nano board)
- On-board direct plug-in for 16X2 Liquid Crystal Display with contrast adjustment
- On-board L293D Motor Driver chipset
- I2C communication pins available for IMU Sensor
- Pin header to connect Line Follower Sensor (up to an array of 6) with power pins
SKU: PGI-00567563 -
Filaments
eSun eABS Max 1.75mm 3D Printing Filament 1Kg – Black
Ask for Latest offers/availability : https://bit.ly/3ET3M6V
- The appearance is black, nontransparent.
- Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant.
- Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
- Allow acetone polishing for appearance
SKU: PGI-00578865 -
Development Board
USB ICSP PIC Programmer – UIC00B
Ask for Latest offers/availability : https://bit.ly/3afGXw9
- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: PGI-0010053 -
Development Board
USB PIC Programmer – UP00B
Ask for Latest offers/availability : https://bit.ly/3akGlFq
- USB powered, no extra power needed to load program
- Two ZIF sockets (20 pins and 40 pins) to ease the program loading process
- Support most 8pin, 18pin, 28pin and 40pin PDIP 8 bit PIC MCU
- Support Windows XP, Vista, 7 (32 and 64-bits)
- Support Intel and AMD based system
- Support Laptop and desktop PC
SKU: n/a -
Advance Controller Board
NANO32 ESP32 IoT Development Board
Ask for latest offers/availability : https://bit.ly/35tIThq
- ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -
SERVO MOTORS AND ACCESSORIES
Gripper with Servo
Ask for Latest offer / Availability : https://bit.ly/34iMxdL
- Supply Voltage: 7 – 17VDC
- Gripper Opening: 0-70mm
- Max Grip Force: 2.14kg@12V (higher if higher supply voltage)
- Max Grip Speed: 440mm/s@12V (Controllable)
- Max Current:1.5A@12V
- Communication: Half Duplex Serial
SKU: PGI-0011429 -
Tyres & Wheels
152MM Mecanum Aluminium Wheel Roller Set (Bearing Type) – 1Pcs
Ask for Latest offers/availability : https://bit.ly/3C50z1V
- Roller Type: Bearing
- Material: Polyurethane with hard ABS plastic mandrel
- Diameter: 19 mm.
- Width: 38 mm.
- Weight: 16 gm.
- Bearing Diameter: 9 mm
- Pin Length: Appro. 53.5 mm
SKU: PGI-0058427 -
3D Accessories
MGN12H Linear Guide Rail – 0.5M with Sliding block
Ask for Latest offer / Availability : https://bit.ly/3hUBwHI
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
SKU: PGI-00503365 -
power supply
LUBI 12V 12A 145W Switch Mode Power Supply
- Overload and Short Circuit-Protection.
- Low Ripple and Noise.
- Light Weight and Compact Design.
- Easy to install Plug and Play.
- High-performance capacitors ensure tightest DC stability and regulation.
- Built-In Fan with Automatic On/Off control Circuit for Temperature Management.
SKU: n/a -
power supply
LUBI 12V 10A 120W Switch Mode Power Supply
- Overload and Short Circuit-Protection.
- High Efficiency and Low Energy Consumption.
- Low Ripple and Noise.
- Light Weight and Compact Design.
- Easy to install Plug and Play.
- High-performance capacitors ensure tightest DC stability and regulation.
- Built-In Fan with Automatic On/Off control Circuit for Temperature Management
SKU: n/a -
-
-
power supply
NHP 5V 8A 40W Switch Mode Power Supply (SMPS)
Ask for Latest offer / Availability : https://bit.ly/3n9LXrD
- AC Input Voltage: 170 ~ 270 V.
- Stable Output Voltage (V DC): 5.
- Output Current (Amp): 8.
- Output Power (Watt): 40.
- Line Regulation: 0.5% (FULL LOAD).
- Load Regulation: 1% (230 VAC I/P).
- Operating Temperature (°C): -20 ~ +70.
SKU: PGI-564860 -
Quad Copter & Multi Rotors
Storm32 Bgc V1.1 3-axis Gimbal Controller Set
Ask for Latest offers/availability : https://bit.ly/2YnU1gj
- Model: Storm32
- Board version: v1.1
- Board color: blue
- Motor drivers in DFN packages: yes
- On-board MPU: yes
- Onboard Bluetooth module: no
- Supply voltage: 6 – 18 V or 2 – 4S
- Motor current: max. 1.5 A per motor
SKU: n/a -
Chargers
Tomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
ChargersTomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
Ask for latest offers/availability : https://bit.ly/3joIzYA
As for rechargeable batteries, a battery charger is a must-have. Here is our TOMO V6-2 Dual USB 2 Slots Battery Charger! Extremely environmentally friendly and energy-saving, our battery charger is great for daily use.
Features:
- USB to Connect to the Power supply.
- Super portable, great for home or travel use.
- Indicators for Charging (Red) and Battery Full (Green).
- With two slots for two batteries charging separately.
SKU: PGI-00112824
