Shop
Showing 937–960 of 1946 results
-
Chargers
HTRC C150 150W 10A LiPo LiFe NiMh Battery Charger/Discharger
Ask for Latest offers/availability : https://bit.ly/3tcUPPx
- Input: AC 100-240V / DC 11-18V
- Charge power: Max 150W
- Discharge power: 10W
- Charge current : 0.1-10A
- Discharge current : 0.1-2A
- Lilon/LiPo/LiFe/LiHV cell count: 1-6cells
- NiCd/NiMH battery cell count: 1-15cells
- PB Battery voltage: 2-20V
- Smart battery: I/II/III
- Current drain for balancing: 500mA/cell
SKU: PGI-00805318 -
Chargers
HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi Charger/Discharger-(Original)
ChargersHTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi Charger/Discharger-(Original)
Ask for Latest offers/availability : https://bit.ly/3EvxkHE
- Adjustable digital DC Power.
- Built-in smart cooling fan for easy heat dissipation.
- Built-In PFC AC adapter high efficiency. with the power switch.
- Multiple charging modes.Lipo/Lilo/LiFe/LiHv: balance charge, charge, fast charge,storage, discharge.
- NiMH/NiCd: Charge, Discharge, Cycle.
- PB: Charge, Discharge.
- Multi-extra function:
- Battery Meter:Display lithium battery cell counts, total voltage, battery capacity percentage,each cell’s voltage. (does not support 1s battery)
- TVC(Terminal voltage control): The Charger allows the user to set the charge/discharge end voltage.
- Lithium Battery internal Resistance Check: can display each cell’s resistance.(does not support 1s battery)
- Balancer: individual-cell-voltage balancing, cell voltage Monitoring
- Smart battery: Smart battery I, II, III,(Need optional DJI Charging cable)
- Data storage and loading.
SKU: PGI-0077341 -
Temperature and Humidity Sensor
HTU21D Temperature and Humidity Sensor Module
Ask for latest offers/availability : https://bit.ly/2VWFWS6
- Power supply: 1.5 ~ 3.6V.
- Humidity measure range: 0-100%RH.
- Temperature measure range: -40 ~ +105 °C.
- Max. power consumption: 2.7 µW.
- Communication: I2C.
SKU: PGI-00399894 -
-
IR and RF Transmitter and Receivers
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For arduino
IR and RF Transmitter and ReceiversHX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For arduino
Ask for latest offers/availability : https://bit.ly/2W59NcB
- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
SKU: n/a -
Load / Pressure / Force / Flex Sensor
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
Ask for latest offers/availability : https://bit.ly/358hrWe
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
SKU: PGI-0016925 -
-
Diy Hx750 Kit, Multirotor motors
Hx750 coreless motor for Drone High quality pack of 4 pcs
Ask for Latest offer / Availability : https://bit.ly/3iNYk93
- Built up for HX750 Drone or similar Drone series.
- Max Speed: 50000 RPM.
- Rated RPM: 48000
- Motor Thickness: 6mm
- Motor Length : 15mm
- Motor Shaft Length : 3mm
SKU: n/a -
Diy Hx750 Kit
HX750 Drone 2.6 Ghz 6 Channel Remote Control Quadcopter Stable
Ask for Latest offers/availability : https://bit.ly/3ENDDra
Type – Remote Controlled Drone
Age – 14 Years+
Material – Plastic
Battery information – 3 AAA (not included)
Product Dimension – L 35 x B 1250 x H 11 cm
Product Weight – 399 gmSKU: PGI-00121 -
-
-
Power Connector
HXT 3.5mm Gold Connector with Protector Male-Female 2-Pairs (4pcs)
Ask for Latest offer / Availability : https://bit.ly/34EasVW
- Improved Locking on insulating caps.
- Gold Plated Connectors tip.
- High-Quality built and Material by Amass.
- Good resistance to Heat high Amp. Current.
- It can accommodate up to the 10awg wire.
SKU: n/a -
Chargers
I max B3 charger for Drone Lipo Battery Charging
Ask for Latest offer / Availability : https://bit.ly/3t3MvkV
- Input voltage: AC 110V-240V. Balance charge current: 850mA
- Display: Green Red LED. Max.charge current:3*800mA
- Connect the B3 Pro charger to power,charger works in good order whilenbsp;three power LEDs will turn from red to green. Please connect the battery pack to 3s balance port , while the three power LEDs will all turn into red and charging begins. Please note once the charging of one cell is done, the corresponding power LED for it will turn green.
- When the three power LEDs all turn green, the charging for 3S battery pack is finished. Net weigt: 89 g / 3.14 oz. Size: 90 x 57 x 35 mm / 3.54 x 2.24 x 1.38 inch. Product.
SKU: n/a -
Break out Boards
I2C Bi-Directional logic Level Converter- 4 Channel
Ask for latest offers/availability : https://bit.ly/2WjWUvk
- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
SKU: PGI-0016919 -
IC's
ICL7107 – 3+1/2 Digit LED Driver with A/D (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/397Qo0W
- Guaranteed Zero Reading for 0V Input on All Scales
- True Polarity at Zero for Precise Null Detection
- No Additional Active Circuits Required
- Enhanced Display Stability
- Pb-Free Plus Anneal Available (RoHS Compliant)
SKU: n/a -
