Shop
Showing 721–744 of 1946 results
-
Development Board
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Ask for Latest offers/availability : https://bit.ly/39UO6lC
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: PGI-003345 -
3D Accessories
DUE R3 Board AT91 SAM3X8E ARM 32 Bit 3D Printer Motherboard Main
Ask for Latest offers/availability : https://bit.ly/3kHyOqk
RAMPS-FD Shield for DUE Board When you use Arduino Due as the controller of your 3D Printer, you may find the RAMPS1.4 is not compatible with DUE.As you know the Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3, the importance is the Atmel SAM3X8E chip used on the Due operates at 3.3V,worse applying 5V to the Due’s inputs will likely damage the chip.
SKU: PG331 -
Motors | Drivers | Actuators Categories, Multirotor Motor
DYS D2836 750KV Outrunner Brushless Drone Motor (Original)
Motors | Drivers | Actuators Categories, Multirotor MotorDYS D2836 750KV Outrunner Brushless Drone Motor (Original)
Ask for Latest offers/availability : https://bit.ly/3MOfrqN
- Model: D2836-11
- Voltage: 2-4Li-Po
- Kv: 750 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 206W
- ESC: 30A
- Screw Size: M3
SKU: PGI-00867299 -
-
3D Accessories
E3D 12V Volcano Upgrade Kit for 1.75mm with 0.80 mm Nozzle
Ask for Latest offers/availability : https://bit.ly/3obUBJ6
With E3D 12V Volcano Upgrade Kit for 1.75mm with 0.80 mm Nozzle Print big and fast! TheE3D 12V Volcano Upgrade Kit for 1.75mm with 0.80 mm Nozzle kit is to upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger part
SKU: PGI-00291854 -
3D Accessories
E3D Brass V6 Nozzle – 1.75mm x 0.40mm
Ask for latest offers/availability : https://bit.ly/3k1SVwy
Modify your 3D printer to print fine details or large parts with E3D’s V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: PGI-00291093 -
3D Accessories
E3D Brass V6 Nozzle – 1.75mm x 0.50mm
Ask for latest offers/availability :https://bit.ly/2GSmDpP
Modify your 3D printer to print fine details or large parts with E3D’s V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: PGI-00291130 -
3D Accessories
E3D Hardened Steel V6 Nozzle 1.75mm x 0.40mm
Ask for latest offers/availability : https://bit.ly/2SYx3Xf
E3D wear-resistant 0.40 mm nozzle made of hardened steel for 1.75 mm filament. Compatible with E3D v6 kits and to be used for filament filled with carbon fibre or other abrasive materials.
SKU: PGI-00291064 -
3D Accessories
E3D Hardened Steel V6 Nozzle 1.75mm x 0.50mm
Ask for latest offers/availability :https://bit.ly/2SYx3Xf
E3D wear-resistant 0.50 mm nozzle made of hardened steel for 1.75 mm filament. Compatible with E3D v6 kits and to be used for filament filled with carbon fibre or other abrasive materials.
SKU: PGI-00291091 -
-
3D Accessories
E3D Prusa i3 V6 Upgrade Kit Fully Assembled (Including Motor)
Ask for latest offers/availability : https://bit.ly/3lR12Nk
This kit allows you to upgrade Prusa i3 type machines to full E3D extrusion, with our in-house tested and approved Prusa Upgrade Kit. Featuring the E3D V6 hotEnd, and our new Titan extruder, on a lightweight and very easy to mount carriage.
SKU: PGI-00290732 -
3D Accessories
E3D Thermistor Cartridge
Ask for Latest offers/availability : https://bit.ly/3F5ldS7
- Semitec 104GT thermistor, which is then potted into a cylindrical copper cartridge with a high conductivity ceramic-based adhesive.
- Legs are insulated with fibreglass sleeving and terminated with a Molex Microfit 3.0 connector.
SKU: PGI-00290615 -
3D Accessories
E3D Titan Extruder 1.75mm with Bowden Adapter
Ask for Latest offers/availability : https://bit.ly/3kKom1n
E3D Titan Extruder 1.75mm with Bowden Adapter a Next-Generation Extruder for your 3D Printer brings high-performance, lightweight extrusion to everyone! All the benefits of geared extrusion in a lightweight, punchy little package.
SKU: PGI-00291460 -
-
-
3D Accessories
E3D V6 12V Direct Drive All-Metal Hotend Kit – 1.75mm
Ask for Latest offer / Availability : https://bit.ly/3clR9Cw
- High-Temperature Performance
- Easy No-solder, No-tape, No-adhesive Assembly And Maintenance
- Print The Widest Range Of Materials Possible
- High-Quality Printing
- Adaptable To Suit Your Needs
- Easy Mounting And Community Support
SKU: PGI-00290859 -
