Shop
Showing 673–696 of 1946 results
-
Xbee Zigbee Module
Digi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
Ask for latest offers/availability : https://bit.ly/3bRfYGD
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: PGI-00130675 -
Xbee Zigbee Module
Digi XBee3 PRO 2.4GHz ZB3.0 RP-SMA Female Antenna
Ask for latest offers/availability : https://bit.ly/2VNPgZM
- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Frequency Band: ISM 2.4 GHz.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
SKU: n/a -
-
Development Board
Digispark ATTINY85 Mini USB Development Board
Ask for Latest offer / Availability : https://bit.ly/2UUZgSN
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- 4 Single Ended Channels
- Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 µA
SKU: PGI-0031117 -
Hardware & Tools, Prayog Blaster
Digital Caliper 150MM 6-inch with Display Screen
Ask for Latest offers/availability : https://bit.ly/2OJKwTT
- Electronic digital caliper Vernier
- An ideal tool digital Vernier caliper for a broad range of industrial and automotive applications made of hardened stainless steel
- Internal, external and height dimensions can be easily and accurately measured linear capacitive measuring system
- Zero setting in any position with a small locking thumb screw which locks the jaws in place
- With easy to read large LCD display handy conversion chart at the back
SKU: PGI-0079 -
Generic Ultrasonic Sensor
Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board
Ask for latest offers/availability : https://bit.ly/3eFxyPB
- Onboard STM8S103 high-performance microprocessor
- With digital tube display
- Valid Measurement Distance: 3-400cm
- Display Unit: cm
- Maximum Input Voltage: 5VDC
- 2.54mm White Socket: 5V power interface.
SKU: PGI-00221002 -
Prayog Blaster, Sensors
Digital LDR Module
Ask for Latest offer / Availability : https://bit.ly/30puwJc
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
SKU: PGI-0029799 -
Prayog Blaster
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
Ask for Latest offers/availability : https://bit.ly/3rh9acW
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SKU: PGI-0014950 -
Prayog Blaster, Sensors
Digital Sensor TTP223B Module Capacitive Touch Switch
Ask for Latest offers/availability : https://bit.ly/3ce0NbB
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: PGI-0031100 -
Electronic Switches/Keypad
Digital Sensor TTP223B Module Capacitive Touch Switch
Ask for latest offers/availability : https://bit.ly/3cUNUmf
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: n/a -
Temperature and Humidity Sensor
Digital Temperature Module For Arduino AVR PIC DIY Maker
Ask for latest offers/availability : https://bit.ly/3eQo2Jg
- Power supply: 3 – 5V
- Good sensitivity
- The output format: Digital switching output (0 and 1)
- The comparator output signal is clean, good waveform, driving ability, more than 15mA.
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
SKU: PGI-00699535 -
Robots and Kits
DIY 18DOF Aluminium Hexapod Spider Six 3DOF Legs Robot Kit with 32CH Controller
Ask for Latest offers/availability : https://bit.ly/2WI9wzl
The three DOF (degree of freedom) leg design means this robot can walk in any direction. The robot has been designed to use 18 TowerPro MG955 servos with maximum torque of 13kg for the legs.
SKU: PGI-0031879 -
Robotics Chassis
DIY 4-wheel Drive Robot Smart Car Chassis Kits with Speed Encoder For RC Car
Ask for Latest offer / Availability : https://bit.ly/3kTaOzc
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- Double layer structure, much of mounting holes, enough space
- Easy to install a variety of control panels, sensors
- Educational toys, Ideal for DIY platform
SKU: PGI-0045 -
-
Robots and Kits
DIY Transparent Motor Smart Robot Car Chassis Kit
Ask for Latest offers/availability : https://bit.ly/3Be6BgP
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- Can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
SKU: n/a -
Flight Controller & Accessories
DJI Naza M Lite Multi-Rotor Flight Controller without GPS
Ask for Latest offer / Availability : https://bit.ly/37GBKwP
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
SKU: PGI-0029615 -
Flight Controller & Accessories
DJI NAZA-M Lite V1.1 with GPS Kit
Ask for Latest offer / Availability : https://bit.ly/2WDiHgy
- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
SKU: PGI-0056686 -
Artificial Intelligence, Robots and Kits
DOBOT AI-Starter Robot Kit for Artificial Intelligence Learning-A Entry Level Educational Robot
Artificial Intelligence, Robots and KitsDOBOT AI-Starter Robot Kit for Artificial Intelligence Learning-A Entry Level Educational Robot
Ask for Latest offer / Availability : https://bit.ly/2EZh0oI
- Graphical programming makes teaching more funny
- Smart autopilot
- Ai teaching courses with full of fun
- Various extended interface with diverse uses
- One-step USB socket
SKU: PGI-00811276 -
Dobot
DOBOT Conveyor Belt Kit
Ask for Latest offer / Availability : https://bit.ly/2Gpbso1
- The simplest mini production Conveyor line
- Programmable switch and speed, stable running, this is our most ideal selection for you.
- Accurately inspect object position, suitable for object recognition and distance check.
- The accurate and responsive tool for you to effectively select and categorize objects.
- These colorful wooden cubes are easy to grab, move and pile,
- The ideal material for you to get a grip of conveyor control.
SKU: PGI-00811278 -
Artificial Intelligence
DOBOT Magician Arduino Artificial Intelligence Kit
Ask for Latest offer / Availability : https://bit.ly/3jF0FVr
- Basic AI Kit for Dobot Magician
- Features an entry-level Learning Kit for Artificial Intelligence
- Lets you explore Machine Intelligence via Human-machine Interaction
- Provides experience the Fun of Electronic Production in PBL
- Uses Smartly Play technology in Open Source Electronic Platform
- Compatible with (not included)
SKU: PGI-811279 -
3D Printer Accessories
DOBOT MOOZ 2Z Plus 3D Printing, Laser Engraving and CNC Carving Printer Kit
Ask for Latest offer / Availability : https://bit.ly/3jpngF1
Modular 3D printer Dobot Mooz 2 Plus containing the module with a nozzle for 3D printing , as well as a module for laser engraving. The printer allows you to create a design of size 200 x 200 x 190 mm. The laser module has 0,5 W of power. Thanks to the module wi-fi, you can remotely monitor printing. The printer consists of prefabricated modules, making installation very simple
SKU: PGI-00811283 -
3D Printers
DOBOT MOOZ 3Z Color Mixing 3D Printer
Ask for Latest offer / Availability : https://bit.ly/3cS9CYN
- Desktop 3D printer with industrial-grade components, three Z-axis greatly improves the stability and printing speed, the precision is up to 0.02mm.
- Innovated design enables it to support mixed-color printing, make it the super in 3d printing field.
- Controlled by a touchscreen controller, just connect it to the machine with a USB cable or memory card (not included) to start printing. Support any STL Files from Repetier-Host, Cura, Slic3r, etc.
- 3D printer modular kit, easy to assemble within 10 minutes, easier for operation and maintenance.
- Supports a wide range of materials including PLA, ABS, PC, FLEX, etc.
SKU: PGI-00811284
