Shop

      Ask for latest offers/availability : https://bit.ly/35NQjfO

1. Channel: 8 channel
2. Relay Operating Voltage: 5V
3. One normally closed contact and one normally open contact
4. Triode drive, increasing relay coil
5. High impedance controller pin
6. Pull-down circuit for the avoidance of malfunction
7. Power supply indicator and Control indicator lamp
8. Power supply and relay instructions, lit, the disconnect is off;

      Ask for latest offers/availability : https://bit.ly/3cqeWSg

1. Operating Voltage: 12V DC
2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
5. Freewheeling diode to protect your microcontroller
6. Input Signal Pin connected to Burg stick for easy accessibility
7. LED Status indicators to indicate the relay ON/OFF status
8. Mounting holes provided

      Ask for latest offers/availability : https://bit.ly/35SoliP

1. Module based on: NE555 chip.
2. Precision Pulse Generation / Timing.
3. Adjustable Duty Cycle.
4. Monostable Operation.
5. Standby no power consumption
6. Countless Application and Information Sources.
7. Time can be adjusted by a potentiometer, the default is 0-25 seconds.
8. Module supplies a diode with an anti-power reverse connection.

      Ask for latest offers/availability : https://bit.ly/3dxbYeF

1. Model: SSR-25DA
2. Operating Voltage(VDC): 3-32
3. Operating Load Voltage (VAC): 24-380
4. Rated Load Current (A): 25
5. Color  Light Gray

      Ask for latest offers/availability : https://bit.ly/3cw9qxv

1. Clean, good waveform driving ability, more than 15mA.
2. Working voltage 3.3V-5
3. Output format: digital switching output (0 and 1)
4. A  fixed bolt holes for easy installation

      Ask for latest offers/availability : https://bit.ly/3biOrws

1. With ESP8266 Wifi module,4-layers board design.
2. Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
3. automatic protection will operate.
4. Input overcurrent protection.
5. 220V 10A relay, one normally open, one normally closed.
6. One way optocoupler isolation input, TVS input protection.

       Ask for latest offers/availability : https://bit.ly/3ckqia1

1. Module based on the NE555 chip.
2. Input voltage: DC 12V
3. Adjustable time: 0-10 s
4. AC Control voltage: 250V/max. 10A
5. DC Control Voltage: 30V/max. 10A
6. Max. load: 2200W

      Ask for latest offers/availability : https://bit.ly/2WAojaY

1. Timing from microseconds to long hours.
2. Simple circuit design.
3. Precision Pulse Generation / Timing.
4. Adjustable Duty Cycle.
5. Monostable Operation.
6. Supply Voltage (V): 12
7. Adjustable Time(s): 0 to 10
8. AC Control Voltage(V): 0-250 @max. 10A
9. DC Control Voltage(V): 0-30 @max. 10A

      Ask for latest offers/availability :  https://bit.ly/3bmv6ui

1. High-temperature resistant plastic shell
2. High voltage load
3. Low power consumption
4. Long-lasting

      Ask for latest offers/availability : https://bit.ly/2zpgOvI

1. Operating input voltage: 4~6V
2. Rated Input Voltage: 5V
3. Rated Load Voltage: 100 to 240 VAC 50/60 Hz
4. Load Voltage Range: 75 to 264 VAC 50/60 Hz
5. Load current: 0.1 to 2 A
6. Leakage current: 1.5 mA max. (at 200 VAC)

      Ask for latest offers/availability : https://bit.ly/2Leu0Gv

1. Voltage version: 5V
2. The static current: 5mA
3. Working current: 190mA
4. Trigger current: 2-4mA
5. The module can be set high level or low-level trigger by the jumper
6. Rated current of the interface is 16A

      Ask for latest offers/availability : https://bit.ly/3duT5sJ

1. Supply voltage: 5VDC
2. Current: greater than 150mA
3. Load: 250V 10A AC or 30V 10A DC