Shop
Showing 313–336 of 1946 resultsSorted by price: high to low
-
Drone FPV Camera
Runcam Swift 3 v2 FPV Camera 2.1mm Lens
Ask for Latest offer / Availability : https://bit.ly/3oWjLs3
- Lightweight
- Integrated OSD
- Horizontal Resolution: 600TVL
- Lens: 2.1mm (M8) FOV160°
- Signal System: PAL / NTSC
- Menu Control: Joystick Control / UART Control Switchable
- Power: DC 5-36V
SKU: PGI-00674144 -
-
Drone Remote/Quad copter Remote
Flysky FS-i4X 2.4GHz 4CH AFHDS R/C Transmitter + FS-A6 Receiver
Ask for Latest offers/availability : https://bit.ly/3uTRPsR
- Use: Vehicles & Remote Control
- Remote Control Peripherals/Devices: Remote Controller
- RC Parts & Accs: Transmitters
- Model Number: FS-I4X
- Material: Plastic
SKU: PGI-0079738 -
Filaments
eSUN ePA Nylon 3D Printer filament 1.75mm 1Kg-Natural
Ask for Latest offer / Availability : https://bit.ly/2UfnpQz
- Environmentally friendly, Nylon Material.
- Printing smoothly, odourless, matte finish.
- High Strength, High Rigidity, Good Toughness, Wear-Resisting, Fitting to 3D print industrial parts.
- Compared with Nylon, it has lower shrink rate and distortion, high accuracy without a warped edge.
- Good flame resistance, Flame-retardant level: UL94-V2
SKU: PGI-00328221 -
Advance Controller Board
NANO32 ESP32 IoT Development Board
Ask for latest offers/availability : https://bit.ly/35tIThq
- ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: n/a -
SERVO MOTORS AND ACCESSORIES
Gripper with Servo
Ask for Latest offer / Availability : https://bit.ly/34iMxdL
- Supply Voltage: 7 – 17VDC
- Gripper Opening: 0-70mm
- Max Grip Force: 2.14kg@12V (higher if higher supply voltage)
- Max Grip Speed: 440mm/s@12V (Controllable)
- Max Current:1.5A@12V
- Communication: Half Duplex Serial
SKU: PGI-0011429 -
Battery and Charger, Chargers
FTRC FT20A Pro AC Adapter DC 14V 220W Output for RC IMAX B6 Balance Charger
Battery and Charger, ChargersFTRC FT20A Pro AC Adapter DC 14V 220W Output for RC IMAX B6 Balance Charger
Ask for Latest offers/availability : https://bit.ly/3Ap76UP
- Input AC supply (V): 100-240V 50/60Hz.
- Output DC supply (V): 14V.
- Rated Power (W): 150.
- Max Power (W): 220.
- Max output current (A): 15.
- AC connecting cable length (m): 1.1.
SKU: PGO-0015251 -
-
Camera Sensor
SeeedStudio Grove – Thermal Imaging Camera – MLX90614 DCC IR Array with 35- FOV
Ask for Latest offer / Availability :https://bit.ly/3kusK2Z
- Based On MLX90614 DCC IR Array with 35° FOV
- Compatible With Grove Ecosystem By SeeedStudio
- I2C Interface to Communicate with MCU
- Wide temperature measurement range (-70℃~380℃)
SKU: PGI-00861299 -
-
Official Raspberry Pi Boards and Hats, Raspberry PI
SeeedStudio Grove Base Kit for Raspberry Pi
Ask for Latest offer / Availability : https://bit.ly/2NzPHFJ
- Support Raspberry pi 2/3B/3B+/4/Zero
- build-in MCU STM32
- 12-bit ADC
- Multi-type Grove port: 6-Digital, 4-Analog, 3-I2C, 1-PWM, 1-UART, GPIO pins
- Supports 60+ Grove modules
- Tutorial and library files
SKU: PGI-00603691 -
Rotary Encoders
Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder
Ask For Availability ; https://bit.ly/2EWBWwt
- Encoder Type: Magnetic
- IP54 (IEC Standard) Protection
- Stainless Steel Shaft
- High-Quality 2-Meter Cable
- Anti-jamming Performance
- 3-Phase Output for More precise Readings
- Small size, lightweight for Easy Installation
SKU: n/a -
Arduino Accessories
SeeedStudio Grove Creator Kit – Beta (30 in 1 Sensor Kit)
Ask for Latest offer / Availability : https://bit.ly/39m4Qm8
- Carefully selected Grove sensors (input) and actuators (output)
- 30 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Comes with 107 colored pages printed book
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite.
SKU: PGI-00606589 -
Motors | Drivers | Actuators Categories
Planetary DC Geared Motor 430 RPM 11N-cm 12V IG32E-14K
Ask for Latest offer / Availability : https://bit.ly/3DAX986
- Brand: Cytron
- Voltage: 12VDC
- Rated Torque: ~1.122 kg.cm (110 mN.m)
- Rated Speed: 430 RPM
- Rated Power: 7 W
- Gear ratio: 14:1
- Encoder Output: 98 PPR
- Gear Material: Metal
SKU: PGI-007974 -
Arduino Boards
Original Arduino Mega 2560 ATmega2560 MCU Rev3
Ask for latest offers/availability : https://bit.ly/3bSwF4o
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
SKU: PGI-00638895 -
-
-
Planetary Gear DC Motor
Orange Planetary Gear DC Motor 24V 270 RPM 98.1 N-cm PG36BL36-26.9K
Ask for Latest offer / Availability : https://bit.ly/3k4l6eF
- Model:PG36BL36-26.9K
- Operating Voltage: 24V DC
- Rated Torque: 98.1 N-cm
- Rated Speed: 270 RPM
- Rated Current: 2.14 A
- Rated Power: 51.46W
- Gear Ratio: 26.9 : 1
SKU: PGI-00812261 -
Tyres & Wheels
EasyMech 127mm Aluminium Mecanum wheels (Bearing type rollers) – Right
Ask for Latest offers/availability : https://bit.ly/3ueEBH6
- Size : 5″(127 mm) Diameter.
- Thickness of wheel : 50 mm.
- Weight : 502 gm.
- Plate Thickness : 2.5 mm.
- Side plates : Aluminum(High Grade alloy aluminium).
- Number of Plates per wheel : 2.
SKU: PGI-0043316 -
Tyres & Wheels
EasyMech 127mm Aluminium Mecanum wheels (Bearing type rollers) – Left
Ask for Latest offers/availability : https://bit.ly/2ZueRLv
- Size : 5″(127 mm) Diameter.
- Thickness of wheel : 50 mm.
- Weight : 500 gm.
- Plate Thickness : 2.5 mm.
- Side plates : Aluminum(High Grade alloy aluminium).
- Number of Plates per wheel : 2.
SKU: PGI-0043317 -
