Electronic Components & IC's
Showing 457–480 of 880 results
-
IR And PIR Sensor, Prayog Blaster
IR Sensor Array with Obstacle and Bump Sensor Arduino compatible
Ask for Latest offer / Availability : https://bit.ly/3kRiQbK
- For Original Product Select SOLD AND FULFILLED BY INVENTO SALES
- Input voltage: 5V DC VCC, GND Pins.
- Output: 5 from TCRT5000 is S1, S2, S3, S4, S5 digital.
- Output: 1 from IR Obstacle sensor Near digital, 1 from Bump switch is CLP digital.
- Dimensions: Length: 11.8 cm. Width: 6 cm.
SKU: PGI-0051 -
-
Sound Sensor
ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker
Ask for latest offers/availability : https://bit.ly/2VRl66y
- The main chip: ISD1820.
- Operating Voltage: DC 3V-5V.
- Loudspeaker: 8Ω, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
SKU: PGI-0043800 -
-
Break out Boards
JoyStick Breakout Module For PS2 Arduino
Ask for latest offers/availability : https://bit.ly/2Wik8Sm
- User can use 3-pin ARDUINO special line really plugged into the expansion board for Use.
- Its type is digital switch
- Cross rocker is a bi-directional 10K resistor
- the original state of X, Y read-out voltage of 2.5V or so
SKU: PGI-00200 -
-
-
-
-
-
-
IC's
L293D – H-Bridge Motor Driver (pack of 5 )
Ask for Latest offer / Availability : https://bit.ly/3c5BzxN
- The Device is a monolithic integrated high voltage.
- high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads.
- switching power transistors.
- allowing operation at a lower voltage and internal clamp diodes are included.
SKU: n/a -
IC's
L293D DIP Motor Driver IC (pack of 10 )
Ask for Latest offer / Availability : https://bit.ly/3qDX2lB
- Wide range of supply voltage from 4.5 to 36v
- Separate Input Logic Supply can be provided
- Output Current per channel 1A for L293 and 600mA for L293D
- Peak Current per channel 2A for L293 and 1.2A for L293D
- Output Clamp diodes are provided to drive inductive loads in L293D.
- Automatic Thermal Shutdown
SKU: n/a -
Electronic Components & IC's
L293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
Electronic Components & IC'sL293D Module, Motor Driver Module, Motor Driver Kit For Robotic Kit For All Mcu
- This is most commonly used driver circuit in robots.
- DC and Stepper motors for micro mouse, line following robots, robot arms Features.
- motor supply current: 600 mA per motor.
- The driver two holes of for easy mounting.
SKU: n/a -
-
IC's
L78M09CV (L7809CV) TO-220 Linear Voltage Regulator
Ask for Latest offer / Availability : https://bit.ly/3C0akzs
- Fixed output voltage is 9V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
SKU: PGI-00293 -
Temperature and Humidity Sensor
LCD Electronic Fish Tank Water Detector Thermometer
Ask for latest offers/availability : https://bit.ly/2VTeXH3
- Temperature range: -50°C ~ +110°C
- Temperature display resolution: ±0.1
- temperature measurement accuracy: 1°C
- Cable Length: 1M
- Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
- Easy to use, small and handy module.
- The module is powered by a pair of LR44 button batteries (battery included)
SKU: PGI-0043822 -
IC's
LF351 BiFET Op-Amp (JFET input op-amp)
Ask for Latest offer / Availability : https://bit.ly/3iDXspo
- Low Input Bias Current: 50 pA
- Low Input Noise Voltage: 16 nV/ Hz
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13V/µs
- Low Supply Current: 1.8 mA per Amplifier
- High Input Impedance: 1012 Ω
- High Common Mode and Supply Voltage Rejection Ratios: 100 dB
SKU: n/a -
IC's
LF356 JFET input op-amp (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3ofB86J
- Low Supply Current with Large Gain Bandwidth Product
- Offset Voltage: 2 mV max
- Low Input Bias Current: 30pA
- Wide Gain Bandwidth: 2.5 MHz
- High Slew Rate: 5 V/µs
- Low Supply Current: 3.6mA
- Low Total Harmonic Distortion: <0.02%
SKU: n/a -
Wearable Electronics
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Ask for latest offers/availability : https://bit.ly/3bVyH30
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a