Shop
Showing 73–96 of 1946 resultsSorted by latest
-
-
Flight Controller & Accessories
UBEC-5V/3A
Ask for Latest offers/availability : https://bit.ly/2XJxIS9
- Working voltage: 5.5v-35v lipo 2s-5s
- Continuous current: 3A
- Instantaneous current: Min. 4A 20 seconds
- Output voltage: 5.25V +/-0.5V
- Suitable for: RC AirPlane Multirotor helicopter
- Special for FPV image transmission
SKU: PGI-00974848 -
-
-
-
STEPPER MOTOR AND DRIVERS
MKS SBASE V1.3 32-bit Open Source Smoothieboard
Ask for Latest offers/availability : https://bit.ly/3iTsf30
- 32bit 100M Cortex-M3 MCU-LPC 1768
- High-performance
- Support highly modular open source firmware Smoothieware
- Easy for secondary development
- Support network function, then proceed remote control via IE Explorer.
SKU: PGI-00766364 -
STEPPER MOTOR AND DRIVERS
MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
STEPPER MOTOR AND DRIVERSMKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
Ask for Latest offers/availability : https://bit.ly/3iW6kIv
- High-speed optocoupler, high-speed without losing a step
- LV8729 chip, with over-current protection circuit, the maximum support 128 segments
- Automatic half-flow function
- A variety of input methods to meet a variety of interface needs
- The use of increased heat sink, good heat dissipation
SKU: PGI-00815856 -
STEPPER MOTOR AND DRIVERS
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
STEPPER MOTOR AND DRIVERSTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Ask for Latest offers/availability : https://bit.ly/3CZIC67
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: PGI-00835839 -
STEPPER MOTOR AND DRIVERS
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
STEPPER MOTOR AND DRIVERSTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
Ask for Latest offers/availability : https://bit.ly/3APRJED
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: PGI-0043211 -
Motor Driver
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
Ask for Latest offers/availability : https://bit.ly/3kku1Kj
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: PGI-0049111 -
Motor Driver
TMC2130 V1.1 Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/37RFo6n
- Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted.
- Only SPI support.
- Broken down into 256.
- Combines maximum efficiency and best motor torque for noiseless operation.
SKU: PGI-00699622 -
Motor Driver
TMC2208 Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/3iSE6P0
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: PGI-00699623 -
Flight Controller & Accessories
Holybro kakute F7 & amp- tekko 32 Blheli32 4 in 1 ESC stack
Ask for Latest offer / Availability : https://bit.ly/3iNq8hn
- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight
SKU: PGI-001010945 -
Fpv Camera
Runcam Hybrid Dual Split FPV Camera
Ask for Latest offers/availability : https://bit.ly/3CysWGQ
- 4K HD & low-latency FPV camera in one
- Wide-Angle 145° HD recording
- Super low-latency (6ms) RunCam Racer FPV camera
- Remote control HD recording
- Simultaneous HD recording and FPV output
SKU: PGI-00867180 -
Fpv Camera
1/3″ CMOS 700TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD
Ask for Latest offers/availability : https://bit.ly/3yBVsoB
- Lens:2.1mm
- Power: DC 5V-12V
- Electronic Shutter Speed: PAL
- Horizontal Resolution: 700TVL
- Day/Night: Auto/Color/B*W
- Signal System: PAL/NTSC (OSD Internal adjustable)
SKU: PGI-00705383 -
-
Drone Frames
Robocat 270 Racing Quadcopter Frame
Ask for Latest offers/availability : https://bit.ly/3fLpfnu
- Approx 270mm motor to motor
- Material – carbon fibre
- Removable canopy made from shock-absorbing PC material
- Flying Weight -410-430g (battery excluded)
- Model net weight: 210 g± 3g
SKU: PGI-00974870 -
Drone Kit, Quad Copter & Multi Rotors
Mini MD90 90mm Racing Drone with Mini Flytower F3
Ask for Latest offers/availability : https://bit.ly/3jTjq8X
- Pack contains quality products
- All products are tested and ready to perform
- All essential equipment required to build a Racing Drone is included in this advanced combo pack.
SKU: PGI-00974862 -
IC's
L78M09CV (L7809CV) TO-220 Linear Voltage Regulator
Ask for Latest offer / Availability : https://bit.ly/3C0akzs
- Fixed output voltage is 9V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
SKU: PGI-00293 -
IC's
LM7805 Voltage Regulator IC
Ask for Latest offer / Availability : https://bit.ly/2WAWByJ
- Fixed-Output Regulator
- Positive Regulator in Negative Configuration
- Adjustable Output Regulator
- Current Regulator
- Adjustable DC Voltage Regulator
- Regulated Dual-Supply
- Output Polarity-Reversal-Protection Circuit
- Reverse bias projection Circuit
SKU: PGI-00289 -
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
Ask for Latest offer / Availability : https://bit.ly/2UMDX6y
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: PGI-0029597 -
Gsm/Gprs
1575 Mhz GPS Antenna for GPS & GSM module with 3 Meter Cable-Good Quality
Ask for latest offers/availability :
- Frequency (MHz) 1575 +/- 5 MHz
- Gain > 28 dBi (with LNA)
- Impedance (Ω) 50 Ω
- VSWR < 1.5
- Polarization RHCP
- Power Handling (W) 50 watts
- Cable Length: 3Meter
- Connector: SMA-Male
SKU: PGI-00778895 -
Chargers
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB
Ask for latest offers/availability : https://bit.ly/2XBllHH
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
SKU: PGI-0053264
