PIC12F675 – Flash 8-pin 1kb 4MHz Microcontroller.
Package indludes :
1 x PIC12F675 Microcontroller
-4%
Microcontrollers
PIC12F675 Microcontroller
Fetures
High-Performance RISC CPU
Only 35 single word instructions to learn
All instructions are single cycle (1µs) except for program branches
Operating speed: DC – 20MHz clock input
Interrupt Capability
8-Level Deep Hardware Stack
Direct, Indirect and Relative Addressing Modes
₹75.00 ₹78.00
Low Power Features
– Standby Current: 1 nA @ 2.0V, typical
– Operating Current: 8.5 µA @ 32 kHz, 2.0V, typical, 100 µA @ 1 MHz, 2.0V, typical
– Watchdog Timer Current: 300 nA @ 2.0V, typical
– Timer1 Oscillator current: 4 µA 32 kHz, 2.0V, typical
Special Microcontroller Features
– Internal and External Oscillator Options
– Power Saving SLEEP Mode
– Wide operating voltage range – 2.0V to 5.5V
– Industrial and Extended Temperature Range
Based on 0 reviews
Be the first to review “PIC12F675 Microcontroller”
Related products
-
Microcontrollers
PIC16F876A – 28 pin Flash 8Kbyte – 20Mhz Microcontroller
- Special Microcontroller Features
- 100,000 erase/write cycle Enhanced Flash Program Memory Typical
- Self-reprogrammable under software control
- Single-supply 5V In-Circuit Serial Programming
- Watchdog Timer (WDT) with its own on-chip RC oscillator
- Programmable Code Protection
- Power-Saving Sleeping Mode
- Peripheral Features
- Two 8-bit (TMR0, TMR2)timer/counter with Prescalar
- One 16-bit timer/counter
- Brown-out detection circuitry
- Parallel Slave Port (PSP): 40/44 pin-device only
- High-Performance RISC CPU
- Only 35 single-word instructions to learn
- DC-20MHz clock input
- Up to 8K x 14 words of Flash Program Memory
- Pinout Compatible to other 28-pin
- Analog Features
- 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)
- Brown-out Reset(BOR)
- Two Analog Comparators
- Programmable on-chip voltage reference (VREF) module
SKU: n/a -
Microcontrollers
PIC16F77 – Flash 8kbyte 8MHz Microcontroller [Microchip]
- Special Microcontroller Features
- Fail-Safe Clock Monitor
- Power-On Reset
- Power-up Timer (PWRT) and Oscillator Start-Up Timer (OST)
- Two-Speed Start-Up mode
- Programmable Code Protection
- Power-Saving Sleeping Mode
- Peripheral Features
- Two 8-bit timer/counter with Prescalar
- One 16-bit timer/counter
- High source/sink current: 25mA
- Master Synchroonous Serial Port (MSSP)
- Parallel Slave Port (PSP): 40/44 pin-device only
- Low-Power Features
- Primary Run(XT, RC, Oscillator, 76 µA, 1MHz, 2V)
- RC_RUN (7µA, 31.25kHz, 2V)
- Timer1 Oscillator (1.8 µA, 32kHz, 2V)
- Wachtdog Timer(0.7 µA, 2V)
- Two-Speed Oscillator Start-up
- Analog Features
- 10-bit, up to 14-channel Analog-to-Digital Converter
- Dual Analog Comparators
- Programmable Low-Current Brown-out Reset (NOR) Circuitry
- Programmable Low-Voltage Detect (LVD)
- Oscillators
- Three Crystal modes: LP, XT, HS (up to 20 MHz)
- Two External RC modes
- ECIO (up to 20 MHz)
- 8 user-selectable frequencies
SKU: n/a -
Microcontrollers
P89V51RD2 – 40MHz Microcontroller 8-bit
- 80C51 CPU
- 5 V operating voltage from 0 MHz to 40 MHz
- 64 kB of on-chip flash user code memory with ISP and IAP
- Supports 12-clock (default) or 6-clock mode selection via software or ISP
- SPI and enhanced UART
- PCA with PWM and capture/compare functions
- Four 8-bit I/O ports with three high-current port 1 pins (16 mA each)
- Three 16-bit timers/counters
- Programmable watchdog timer
SKU: n/a -
Microcontrollers
PIC16F877A – Flash 8kbyte 4MHz Microcontroller [Microchip]
- Special Microcontroller Features
- 100,000 erase/write cycle Enhanced Flash Program Memory Typical
- Self-reprogrammable under software control
- Single-supply 5V In-Circuit Serial Programming
- Watchdog Timer (WDT) with its own on-chip RC oscillator
- Programmable Code Protection
- Power-Saving Sleeping Mode
- Peripheral Features
- Two 8-bit (TMR0, TMR2)timer/counter with Prescalar
- One 16-bit timer/counter
- Brown-out detection circuitry
- Parallel Slave Port (PSP): 40/44 pin-device only
- High-Performance RISC CPU
- Only 35 single-word instructions to learn
- DC-20MHz clock input
- Up to 8K x 14 words of Flash Program Memory
- Pinout Compatible to other 28-pin or 40/44-pin
- Analog Features
- 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)
- Brown-out Reset(BOR)
- Two Analog Comparators
- Programmable on-chip voltage reference (VREF) module
- CMOS Technology
- Low-power, high-speed Flash/EEPROM technology
- Fully Static Design
- Wide Operating Voltage Range (2.0V to 5.5V)
- Low-power Consumption
SKU: n/a
There are no reviews yet.