IoT and Wireless
Showing 73–96 of 114 results
-
Esp Wifi Module
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
Ask for latest offers/availability : https://bit.ly/3aIA04A
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: n/a -
-
Esp Wifi Module
Olimex ESP8266 EVB-BAT
Ask for latest offers/availability : https://bit.ly/3aRHsdX
- Includes MOD-WIFI-ESP8266-DEV
- Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED
- Big button for easier access to UART mode
- LiPo battery connector with built-in LiPo charger and status LEDs
- Step up converter
- Power jack for +5V external power supply
- UEXT connector
- 20-pin connector CON1 with ESP8266’s signals
- PCB dimensions: (2.0 x 2.2)” ~ (51 x 57)mm
SKU: n/a -
Esp Wifi Module
Olimex ESP8266-EVB
Ask for latest offers/availability : https://bit.ly/3c05zbm
- Includes MOD-WIFI-ESP8266-DEV
- Relay 220VAC/10A with connector and status LED
- Big button for easier access to UART mode
- Power jack for +5V external power supply
- UEXT connector
- The row of 16 pinholes at 0.1″ step with all ESP8266 signals accessible; male-male 16-pin connector included
- 4 mounting holes
SKU: n/a -
Advance Controller Board
Particle Argon IoT Development Kit
Ask for latest offers/availability : https://bit.ly/3b43wBQ
- On-board additional 4MB SPI flash
- Micro USB 2.0 full speed (12 Mbps)
- Integrated Li-Po charging and battery connector
- JTAG (SWD) Connector
- RGB status LED
- Reset and Mode buttons
SKU: n/a -
Advance Controller Board
Pycom WiPy 2.0 WiFi-Bluetooth IOT Development Board
Ask for latest offers/availability : https://bit.ly/2W1nIAh
- Manufacturer: Pycom
- Interface Type: I2C, I2S, SPI, UART
- Operating Supply Voltage:3.3 V to 5.5 V
- Frequency:2.4 GHz
- Protocol Supported:802.11 b/g/n
- Product Type: WiFi Development Tools
SKU: n/a -
IR and RF Transmitter and Receivers
RF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
IR and RF Transmitter and ReceiversRF Transmitter Receiver Module 315MHz Wireless Link Kit For Arduino
Ask for latest offers/availability : https://bit.ly/2Yw4Nz7
- This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly! Connect the transmitter to your Arduino, Raspberry Pi or other microcontroller and the receiver to whatever you’d like to control.
SKU: n/a -
IR and RF Transmitter and Receivers
RFM69HCW Wireless Receiving Module-434 MHz
Ask for latest offers/availability : https://bit.ly/2ypOidi
- RFM69 series wireless communication module is designed to work at 434Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics
SKU: PGI-00223521 -
IR and RF Transmitter and Receivers
RFM69HCW Wireless Receiving Module-915 MHz
Ask for latest offers/availability : https://bit.ly/3fksgcm
- RFM69 series wireless communication module is designed to work at 965Mhz ISM band global free application. It is designed for low-power, high-bandwidth wireless digital communications module. The modules have a low cost, small, stable, product consistency and other characteristics.
SKU: n/a -
IR and RF Transmitter and Receivers
RXB6 433Mhz Superheterodyne Wireless Receiver Module
Ask for latest offers/availability : https://bit.ly/2WqvJgV
- Power supply voltage input range: 3V-5.5V;
- Low power consumption, 3.3V @ 433.92MHz, 6.0mA
- Power Enable mode power consumption can be done lowest 50nA;
- has an analog RSSI signal strength level output;
- Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification;
SKU: n/a -
Gsm/Gprs
SAM Head Sucker Antenna for SIM900A SIM908 Development Board dedicated Antenna
Ask for latest offers/availability : https://bit.ly/3flVKaa
- Frequency range: 800MHz, 900MHz, 1200MHz, 1500MHz, 1800MHz, 1900MHz.
- gain : 7 (dB).
- The antenna height (mm):90
- Cable Length:2 Meter
- Connector Type:SMA(male)
- Standing wave ratio: ≤1.5
- Input impedance: 50 Ω
SKU: n/a -
Advance Controller Board
Seeed Studio Wio Lite W600 ATSAMD21 Wireless Development Board
Ask for latest offers/availability : https://bit.ly/2KWKXoy
- Micro Processor: SAM D21 ARM Cortex-M0+
- Input Supply voltage (V) : 3.3 ~ 5V (USB C type connector)
- Analog I/O: 6 Pins
- Digital I/O: 14 pins
- WiFi Module Supports: 802.11 b/g/n
SKU: n/a -
Esp Wifi Module
Seeedstudio ESP8285 Wi-Fi SoC Module
Ask for latest offers/availability : https://bit.ly/3cVtY27
- The smallest 802.11b/g/n Wi-Fi SoC module
- Uses low power 32bit CPU and compatible with the application processor
- Main frequency up to 160MHz
- Built-in 10Bit high precision ADC
- Support UART/GPIO/PWM/ADC interface
- Integrate Wi-Fi MAC/BB/RF/PA/LNA
SKU: n/a -
Lora Wifi
SeeedStudio Grove LoRa Radio 433MHz
Ask for latest offers/availability : https://bit.ly/2zP1s3W
- Using RFM95 module based on SX1276 LoRa®
- ~28mA(Avg) @+20dBm continuous transmit
- ~8.4mA(Avg)@standby mode
- ~20mA(Avg) @receive mode, BW-500kHz
- Simple wire antenna or MHF Connector for external high gain antenna
- +20dBm – 100 mW Power Output Capability
SKU: n/a -
-
-
Gsm/Gprs
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board
Ask for latest offers/availability : https://bit.ly/3ffVnO9
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: n/a -
Gsm/Gprs, IoT and Wireless
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Gsm/Gprs, IoT and WirelessSIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Ask for Latest offer / Availability : https://bit.ly/3xlBUV6
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: PGI-00336554 -
Gsm/Gprs
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
Ask for latest offers/availability : https://bit.ly/35vJtLO
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: n/a -
-
Gsm/Gprs
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
Ask for latest offers/availability : https://bit.ly/2z7ibPw
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: n/a -
Gsm/Gprs
SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
Ask for latest offers/availability : https://bit.ly/3b5fE5z
- Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- the small size is suitable for all kinds of sleeve belt type and embedded.
- Power supply: 5 -20 V.
- Power Interface: 2.54 mm Pin header or MICRO USB interface.
SKU: n/a -
Gsm/Gprs
SIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Gsm/GprsSIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Ask for latest offers/availability : https://bit.ly/3fecIHb
- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
SKU: n/a -
