Electronic Components & IC's
Showing 217–240 of 880 results
-
Power Module
8 Pin 2.54mm Pitch Pluggable Screw Terminal Block
Ask for Latest offer / Availability : https://bit.ly/3rxE1T1
- Saves space due to the small design
- Screw connection with tension sleeve
- Maximum contact force ensures a low-temperature rise
- Connection in accordance with EN-VDE Standard.
SKU: n/a -
Power Connector
8 Pin 5.08mm Pitch Pluggable Screw Terminal Block
Ask for Latest offer / Availability : https://bit.ly/3pluQDs
- Saves space due to the small design
- Screw connection with tension sleeve
- Maximum contact force ensures a low-temperature rise
- Connection in accordance with EN-VDE Standard.
SKU: PGI-00528500 -
Relay
8 Road/Channel Relay Module (with light coupling) 12V
Ask for latest offers/availability : https://bit.ly/3cqeWSg
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: PGI-0031228 -
Relay
8 Road/Channel Relay Module (with light coupling) 24V
Ask for latest offers/availability : https://bit.ly/2LcLnaE
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: PGI-0031236 -
Vibration/Tilt Sensor
801S Vibration Shock Sensor Module
Ask for latest offers/availability : https://bit.ly/3cPHVhY
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: PGI-0043743 -
-
-
Current and Voltage Sensor
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
Ask for latest offers/availability : https://bit.ly/3aw4l6h
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: PGI-00559742 -
IC's
ADC0804 – 8-bit A/D Converter (National Semiconductor)
- Compatible with 8080 Microprocessors
- Easy interface to all microprocessors, or operates ‘stand alone’
- Differential analog voltage inputs
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) Voltage Reference
- On-chip clock generator
- 0V to 5V analog input voltage range with single 5V supply
- No zero adjust required
- Operates ratiometrically or with 5 Vdc, 2.5Vdc, or analog span adjusted voltage reference
SKU: n/a -
IC's
ADC0808CCN – 8-bit A/D Converter
- Easy interface to all microprocessors
- Operates ratiometrically or with 5 VDC or analog span adjusted voltage reference
- No zero or full-scale adjust required
- 8-channel multiplexer with address logic
- 0V to VCC input range
- Outputs meet TTL voltage level specifications
- ADC0808 equivalent to MM74C949
SKU: n/a -
-
Break out Boards
ADS1115 16-Bit ADC-4 Channel with Programmable Gain Amplifier
Ask for latest offers/availability : https://bit.ly/2zqGSXe
- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
SKU: PGI-0043582 -
Biometric/ECG/EMG/Sensor
Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes
Ask for latest offers/availability : https://bit.ly/2Y1cUDp
- The diameter of the Electrode Pad: 52 mm
- Cable Length: 2 feet
- Weight: 30gm.
- Improved adjustable gain (more rugged)
- Onboard port for our new cables
- Connects to the board straight out of the box
- The reduced voltage needed (+-3.5V)
SKU: PGI-00261834 -
Sensors
Advanced Auto-Calibrating Line Sensor LSA08
Ask for Latest offer / Availability :- https://bit.ly/2zdBDdC
- 8 sensor pairs spaced 16mm.
- 12V input power
- Onboard Mode and a Select button for instant configuration of LSA08
- LCD display unit showing 8 sensors analog value with bar chart and line position.
- Simple Auto-Calibration function to the line following surface.
- Low current consumption (typically 26mA)
- Works on glossy or reflective surface
- Refresh rate up to 200Hz.
SKU: PGI-006182 -
Sensors
ADXL345 Tripple Axis Accelerometer Board
Ask for Latest offer / Availability : https://bit.ly/3vvh83n
- Supply Voltage: 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection
SKU: PGI-0033070 -
Temperature and Humidity Sensor
AM2301 Capacitive Digital Temperature & Humidity Sensor
Ask for latest offers/availability : https://bit.ly/3508i24
- Model: AM2301.
- Supply voltage: 3.3 ~ 5.2 V DC.
- Signal output form: Digital signal output.
- Temperature measurement range: -40 ~ +80 ºC.
- Temperature measurement precision: ± 0.5ºC
- Humidity range: 10%~90%RH.
- Humidity measurement precision: ±3%RH.
SKU: PGI-00347581 -
Temperature and Humidity Sensor
AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module
Ask for latest offers/availability : https://bit.ly/2Y1vqM4
- Temperature detection of the two-dimensional area: 8 × 8 (64 pixels).
- Digital output (capability of temperature value output).
- Compact SMD package (adaptively to reflow mounting).
- RoHS compliant.
SKU: PGI-00456119
